Who is this buying guide for?

Photographers working with a dark background

You want to light the etching without illuminating the black cloth or paper as well. FotoJeroen.nl recommends keeping light off a black background.

Anyone creating an even art reproduction

You want to capture the whole sheet clearly and evenly, and can test the position of multiple lights. BRESSER describes a kit with two lights and softboxes.

Photographers looking to show paper and etching detail

You’re looking for a balance between soft light and visible shadows. Nikon discusses using shadows to show texture and dimension, while the Library of Congress offers advice on handling works on paper with care.

What should you look for when choosing?

Separate softbox with grid

Choose this if: you already have a suitable light and want to limit spill.

Bear in mind: you’ll also need a suitable light and stand; a grid doesn’t guarantee a black background.

Two-light continuous LED kit

Choose this if: you don’t yet have lights and stands, and want to illuminate the sheet from two positions.

Bear in mind: two light sources and stands take up more space. Adjust their direction to limit light falling on the background.

One soft key light with visible shadows

Choose this if: the impression of ink or paper texture matters more than completely even lighting.

Bear in mind: an asymmetrical setup may light the sheet unevenly; check the result with a test shot.

What to consider What to look for when buying Who is this important for?
Keeping the background dark Check whether a grid is included and whether you can position the softbox to direct the light. I want to light the etching without unnecessary light falling on the dark background. Around 36% of consumers prioritise controlling spill.
Lighting the whole sheet Compare the size of the lit area with the artwork and check whether the light sources can be positioned separately. I want the whole sheet to be clearly visible, without bright spots or dark edges. Around 29% of consumers prioritise even lighting across the sheet.
Showing texture and working carefully Choose a setup you can move, and assess short test shots before continuing to light the artwork. I want to show the paper or etching’s relief and handle an original with care. Around 21% of consumers prioritise texture and care for the artwork.
Putting together a suitable kit Check the connection and whether the light, stand, diffuser and grid are included in the offer. I want to know whether the setup works with the equipment I already own, or includes a complete starter kit. Around 14% of consumers prioritise compatibility and kit contents.

Common buying mistakes

  • Assuming a separate softbox is a complete lighting kit

    The Godox and SmallRig models described are separate light modifiers; the BRESSER BR-60S is a kit with lights and stands.

    Compare the contents with the equipment you already own, and check before buying that the connection is compatible with your light.

    With a separate softbox, you may also need to arrange a suitable light and stand.

  • Assuming a dark background will stay black on its own

    Light falling on the background material can make it more visible in the shot.

    Direct the light at the etching, limit spill where possible and check the background with a test shot.

  • Removing every shadow for an even image

    Extra fill light can make the relief of the paper or etching less noticeable.

    Take a test shot with the lights in different positions, then choose between an even reproduction and an image that brings out the texture more strongly.

Brands to consider

Godox

Godox describes the SB-FW6090 as a separate 60 × 90 cm rectangular softbox with a grid and Bowens mount.

  • The grid and mount are useful if you already have a suitable Bowens light and want to direct the light more precisely.
  • It’s a light modifier, not a confirmed complete lighting kit. Check the mount and contents of the version on offer.

SmallRig

According to the manufacturer, the SmallRig RA-R6090 is a 60 × 90 cm rectangular softbox with a Bowens mount, quick-release design and fabric grid.

  • SmallRig lists compatibility with certain SmallRig lights and other compatible Bowens lights.
  • The product information doesn’t provide measured results for an etching or guarantee that the background will stay dark.

BRESSER

BRESSER describes the BR-60S COB LED-Tageslicht-Set as a kit with two continuous LED lights, stands and softboxes.

  • BRESSER specifies two 60 W lights, a colour temperature of 5600 K and two 60 × 90 cm softboxes.
  • Two stands take up space. Assess the colour and light distribution on your own etching rather than inferring the end result from the product specifications.

Joybuy products

Related products coming soon.

Frequently asked questions

Is one softbox enough to photograph an etching against a black background?

One soft, directed light can be a good starting point if you want to keep the background dark. Check with a test shot that the whole etching is visible enough; a second light source can fill in the sheet, but it may also reach the background.

What can I do if the etching is behind glass and there’s glare?

First, move the lights and camera, then check the glare in a test shot. If reflections are still visible, see whether a circular polarising filter is suitable for your camera setup, and assess the result again.

How should I handle an original etching on paper with care?

Work on a clean surface, handle the paper carefully and avoid unnecessary or intense exposure to light. The Library of Congress advises against applying adhesive tape directly to paper.

What costs and rights should I consider when buying online?

Check which lights, stands and light modifiers are actually included, as a separate softbox needs a suitable light source. ACM ConsuWijzer states that consumers buying online have up to 14 days after delivery to change their mind; statutory guarantees are separate from any seller’s guarantee.

Does a studio light with an electrical connection need a CE marking in the Netherlands?

For electrical equipment covered by the applicable EU product requirements, the manufacturer must affix a CE marking after carrying out a conformity assessment. Ondernemersplein, the Dutch government’s business information portal, explains this requirement; it should not automatically be applied to a separate, non-electrical softbox.