Who is this lighting set-up for?

Etching reproduction maker

You want to capture the entire sheet and print clearly and evenly. Having space for a light on either side can be important, as described by the Canadian Conservation Institute.

Photographer of paper details

You want to show the paper texture, relief in the print or the condition of the work. You can adjust the direction of the light and take a separate detail shot. The Canadian Conservation Institute explains how raking light brings out texture.

Photographer of framed etchings

You want to reduce distracting reflections from glass or a glossy surface before anything else. The Smithsonian Institution Archives explains how reflections can obscure image detail.

Which lighting set-up is right for your shot?

Two light sources

Choose this when: you want to light the whole sheet evenly and have room on both sides.

Bear in mind: even lighting can make the surface texture less visible.

One adjustable LED panel

Choose this when: you want to move the light around to assess glare or paper texture in test shots.

Bear in mind: check that the shadowed side of the etching remains clear enough to see.

Low raking light

Choose this when: you want to draw attention to paper texture or possible damage.

Bear in mind: this gives you a different result from even reproduction lighting; you may need a separate overview shot.

What to consider What to look for when buying Who is this important for?
Clear, even reproduction Check whether there is room for two light sources, and compare a shot of the whole sheet with a detail shot. The Canadian Conservation Institute describes lamps placed on either side at 45 degrees as an example of a suitable set-up. If I want to capture the whole sheet clearly and evenly, I also want the print and edges of the sheet to remain easy to see. Around 34% of consumers prioritise even reproduction.
Visible paper texture and print relief Check whether the panel and its mount can sit low and steadily beside the sheet; take a separate shot to show texture. The Canadian Conservation Institute describes raking light at an angle of 5–10 degrees. If I want to show paper texture or print relief, I want to be able to adjust the direction of the light and capture the detail separately. Around 22% of consumers put surface texture first.
Reducing reflections Take a test shot and check whether the lights or camera are reflected in the glass. If necessary, change their position or try more indirect lighting. If I’m photographing an etching behind glass or with a glossy surface, I want to stop reflections from covering parts of the image. Around 33% of consumers prioritise reducing reflections.
A suitable set-up and equipment Check whether the exact version includes the required stand, diffuser and power supply; also consider how much space is available beside the etching. If I have limited space or want to put together a complete set-up, I want to know what mount and power supply I’ll need. Around 11% of consumers prioritise a compact set-up and included accessories.

Common buying mistakes

  • Confusing even lighting with visible paper texture

    An evenly lit shot can hide texture, while raking light brings it out. These are different goals for a photograph, as the Canadian Conservation Institute explains.

    If needed, take both an evenly lit overview shot and a separate shot to show the relief.

  • Buying more or brighter lights before checking for reflections in glass

    Reflections from a glossy surface can obscure image detail. The Smithsonian Institution Archives describes this issue when photographing reflective objects.

    First, test the direction of the light and the camera position with a test shot; try more indirect lighting if needed.

  • Assuming all the accessories shown are included

    According to the manufacturer, the NEEWER NL660 is available in versions with and without a stand; a compatible NP-F battery is not included.

    Compare the parts list for the exact version with the equipment you need for your set-up.

Brands to consider

Godox

The P260C Pro is a panel worth considering if adjustable colour temperature and built-in diffusion are important to you.

  • Godox lists a colour temperature of 2800–6500 K, an average CRI of at least 98 and a diffuser for the P260C Pro.
  • These are manufacturer specifications, not an independent test of colour rendering when photographing etchings; check the mounting and the version you’re considering.

NEEWER

The NL660 is worth considering if you want to position a panel at an angle beside the etching and adjust the brightness.

  • NEEWER lists an adjustable colour temperature of 3200–5600 K, dimming and an adjustable bracket for the NL660.
  • The manufacturer lists versions with and without a stand, and says that an NP-F battery is not included. The stated CRI of at least 96 is a manufacturer specification.

amaran

The P60x is an option if a separate softbox and light control fit your set-up.

  • amaran lists an included softbox and grid, a colour temperature of 3200–6500 K and a CRI of at least 95.
  • These manufacturer specifications don’t prove that the panel will eliminate reflections from your etching; assess the result with a test shot.

Ulanzi

The compact VL81 is another type of product to consider when space is limited and you want to position a small light source precisely.

  • Ulanzi lists adjustable light from 3200–5500 K, a built-in battery and mounting via a cold shoe or 1/4-inch thread.
  • A compact light isn’t necessarily a substitute for a larger, diffused studio panel when you need to light a whole sheet evenly. Assess the result with a test shot.

Joybuy products for this shot

Related products coming soon.

Frequently asked questions

Do you always need to buy two LED panels for an etching?

No. The Canadian Conservation Institute describes using two lamps on either side for even lighting, but recommends a single low-positioned lamp to show surface texture. Take test shots to work out which result you need; this lighting technique doesn’t require you to buy two panels.

How should you start if the etching is behind glass?

Start with a test shot and look for areas with bright reflections. Then change the position of the lights and camera, or try more indirect lighting. The Smithsonian Institution Archives explains that a different lighting set-up can reduce reflections on highly glossy objects, but check the result on your own work.

What should you check besides the panel?

Check the parts list for the exact version, including the stand, diffuser and power supply. NEEWER lists versions of the NL660 with and without a stand, and says that a compatible NP-F battery is not included.

What are your rights in the Netherlands if the panel develops a fault?

When you buy as a consumer, the product must be of satisfactory quality. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands; what you can expect also depends on the product. If there is a fault, contact the seller to find a solution.

Is a CE logo enough to prove that a panel is suitable for photographing etchings?

No. According to the European Commission, CE marking is required when applicable harmonised EU rules say it is. The mark alone doesn’t tell you whether a panel provides the right light for an etching; assess the product specifications and relevant product information separately.