Full-view photographer
You want to capture an entire etching clearly and as evenly as possible, and can check whether two lighting positions will fit around your worktable. For art reproduction, Broncolor describes using several soft light sources.
For a full-view shot, choose a setup that distributes light evenly across the etching. To bring out the paper texture, a movable light source at a different angle may work better. For art reproduction, Broncolor describes using several soft light sources, but soft, symmetrical lighting can flatten surface texture. Also check that you have space for panels and stands, and that the power supply, accessories and compliance details are right for the exact version.
You want to capture an entire etching clearly and as evenly as possible, and can check whether two lighting positions will fit around your worktable. For art reproduction, Broncolor describes using several soft light sources.
You want to show the paper texture or surface variations as well as the print itself. Broncolor notes that a lighting setup that is too soft can make texture less visible.
You need to be able to move or put away the lighting after your shoot, so you pay attention to mounting, power and loose components.
Choose your setup according to what the photo needs to show: a full sheet, the paper texture, consistent colour, or a workspace that needs to be cleared quickly.
Choose this if: you want to light an entire etching evenly and have room for two lighting positions.
Keep in mind: two stands take up space, and soft, symmetrical lighting can flatten the texture. NEEWER lists two panels, stands and mains adapters among the items included with the NL660 kit.
Choose this if: you want to switch between a full-view shot and one that shows the texture. According to its manual, the amaran P60x has adjustable white light.
Keep in mind: with a single light source, even lighting across a large sheet is not guaranteed; check the light distribution and shadows in a test shot.
Choose this if: you mainly photograph smaller etchings or details and want to clear the workspace afterwards. According to SmallRig, the P200 has 1/4-inch threaded holes.
Keep in mind: the stated 2000 lux applies at 0.3 metres; the listed box contents do not include a stand or power adapter.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Even lighting across the entire etching | Assess a test shot of the full sheet. Compare lux figures only when the measurement distance and settings are the same. | I want to light the entire etching evenly in one full-view shot and can make room for two lighting positions. Around 33% of consumers prioritise even lighting across the whole sheet. |
| Paper texture and reflections | Check whether you can adjust the angle and distance of the light. If needed, take separate test shots for the full view and the texture. | I want to make the paper texture visible, even if that means taking a separate shot with the light coming from a different angle. Around 27% of consumers prioritise visible texture. |
| Consistent colour and tone | Check the adjustable white-light range of the exact model. Keep the lighting settings and white balance the same between shots, and assess a test image. | I want to be able to compare colours and tones across successive shots. Around 20% of consumers prioritise repeatable colour and tone. |
| Setting up and packing away | Check the mounting, cable routing and included power supply, supports and adapters for the exact version. Keep cables out of walkways. | I need to be able to put the light away after use and want to know which components my shared workspace requires. Around 20% of consumers prioritise a setup that is quick to pack away. |
Lux figures depend on the measurement distance and settings. The stated figures for the amaran P60x and SmallRig P200 apply at different distances, so they are not directly comparable. The Aputure manual and SmallRig product information specify these measurement conditions.
Only compare manufacturers' figures when the measurement distance and settings match. Also assess coverage with a test shot of the full sheet.
Broncolor describes soft light for even art reproduction, but light that is too soft can make surface texture less visible.
If needed, take a separate test shot with the light source in a different position, and check both the texture and the shadows.
The included supports and adapters vary by version. For example, NP-F batteries are not included with the NEEWER NL660 kit mentioned here.
Before buying, check the box contents, mounting and power supply for the exact version. Follow the manual and keep cables out of walkways.
The NL660 two-panel kit is an option for lighting an etching from two positions.
The P60x is a movable bi-colour panel for those who want to adjust the light position and white-light setting.
The LEDP260C is an adjustable panel for use with a lighting stand or handle.
The P200 Beauty Panel 4066 is a compact panel for smaller shots or a workspace with a suitable mount.
No. Several soft light sources can help illuminate a flat work evenly, but a very soft setup can flatten the paper texture. If you want to show the texture, also take a test shot with the light coming from a different angle.
Use a suitable, stable mount and keep cables out of walkways. The manual for your chosen model provides specific safety and cleaning instructions; disconnect the light as instructed before cleaning it.
It depends on the version. NEEWER lists two stands and mains adapters with the NL660 two-panel kit, but no NP-F batteries. SmallRig lists a USB-C cable with the P200, but no stand or power adapter. Always check the box contents for the exact version.
For online consumer purchases, there is generally a cooling-off period of up to 14 days after delivery, subject to statutory exceptions. ACM ConsuWijzer explains the cooling-off period. If a consumer product does not conform to the agreement, the seller is responsible for providing a statutory remedy; the Netherlands Authority for Consumers and Markets lists repair or replacement as possible remedies. These consumer rules do not necessarily apply to a business purchase made by a workshop.
An LED panel must carry a CE marking if it falls under EU rules that require one. According to the European Union, the manufacturer must then assess the applicable conformity and affix the marking. Check the exact version: a declaration for one model does not prove another model's conformity. Aputure Imaging Industries explicitly names the amaran P60x in a model-specific declaration.