Who is this buying guide for?

Reproduction photographer

You want to capture the lines and the whole sheet of an etching evenly, for documentation or display. Light distribution and white balance both matter. The University of Oregon’s guidance covers how to position light sources when photographing flat artwork.

Photographer capturing relief details

You want to show the plate mark or paper texture as well as the main image. Conservation Wiki describes raking light as a way to reveal impressions and other surface variations.

Home user with an existing studio light

You’re looking for a separate light modifier that fits the light you already own. Manufacturer information from Godox, NEEWER and Aputure shows why it’s important to check the mount and included components for each model.

What should you look for in softbox lighting for an etching?

Two lights for an even reproduction

When: If you want to capture the whole etching as evenly as possible. The University of Oregon recommends using two lights on either side for flat artwork.

Consider: You’ll need two light sources and enough room to position them. Check the corners too, and look out for reflections.

A softbox for an existing light

When: If you already have a suitable light and want to shape its output with a compatible softbox.

Consider: The mount must be compatible, and a softbox sold on its own won’t necessarily include a light or stand.

Raking light for a separate detail shot

When: If the plate mark or paper texture is important. Conservation Wiki explains how light falling at an angle can emphasise relief.

Consider: This is a different goal from creating an even reproduction, so don’t use raking light instead of your main set-up.

Key consideration What should you check? Who is this important for?
Even lighting Compare the centre and edges in a test shot, and check whether two lights on either side will fit in your space. If I want to capture the whole etching for documentation, even lighting is my main concern. Around 33% of consumers prioritise an even reproduction.
Reflections and shadows Take a test shot from the intended camera position and move the lights if reflections are still visible. If I’m photographing behind glass or working with glossy areas, I want to be able to assess distracting reflections and shadows. Around 27% of consumers focus primarily on controlling reflections.
Plate mark and paper texture Decide whether you also want to take a separate photograph with light falling at an angle, alongside your evenly lit main shot. If I want to show the plate mark or paper texture, making the relief visible is my priority. Around 20% of consumers put this goal first.
Mount and components Check your light’s mount, what’s included in the package, and whether you have room for the lights and stands. If I want to use my existing equipment and fit the set-up into my home, I’ll first check the mount and what I already own. Around 20% of consumers prioritise compatibility and space requirements.

Common buying mistakes

  • Assuming a separate light modifier is a complete lighting kit

    A softbox doesn’t produce light on its own, and the included components vary by model. For example, the manufacturer states that the flash head and stand are not included with the NEEWER SB-BW6090.

    Compare the contents of the package with the light, stand and mount you already have.

    If the system doesn’t include the right speedring, you may need to buy it separately.

Softbox brands to consider

Godox

Godox describes the SB-FW6090 as a rectangular 60 × 90 cm Bowens softbox.

  • The size and Bowens mount are listed in the product specifications.
  • Check that your light has the compatible mount. The product specifications don’t say how evenly it will light a particular etching.

NEEWER

The manufacturer describes the SB-BW6090 as a rectangular 60 × 90 cm Bowens softbox.

  • According to NEEWER, the package includes inner and outer diffusers, a Bowens ring and a carry bag.
  • The manufacturer says the flash head and stand are not included, so check whether you already have them.

Aputure

According to Aputure, the Light Box 60x90 is a rectangular Bowens softbox with a 60 × 90 cm front.

  • Aputure lists two diffusion options and a grid.
  • The stated diffusion features aren’t a measurement of the results you’ll get with a particular etching. Also check that your light source is compatible.

SmallRig

According to SmallRig, the RA-D85 is a round Bowens softbox with a diameter of approximately 85 cm.

  • SmallRig lists two diffusion fabrics and a grid.
  • Its round shape differs from rectangular models. The manufacturer doesn’t show that this shape will light an etching more evenly.

Elinchrom

The Rotalux Recta is a rectangular 60 × 80 cm softbox.

  • Elinchrom describes the softbox as foldable, with adjustable diffusion.
  • According to Elinchrom, the Rotalux speedring must be purchased separately. Check which ring fits your light.

Softbox products for photographing etchings

Related products will be available soon.

Frequently asked questions

How should you position the lights and camera for an even photograph?

Keep the camera parallel to the etching and try using two lights on either side. The University of Oregon recommends this set-up for flat artwork. Take a test shot and compare the lighting in the centre and around the edges.

How can you capture the plate mark of an etching?

Take a separate photograph with light falling at an angle across the surface. Conservation Wiki explains how raking light can use shadows to emphasise impressions and other surface variations. Don’t use this shot instead of an evenly lit reproduction.

Does a standalone softbox come with a light or stand?

Not necessarily. For the NEEWER SB-BW6090, the manufacturer explicitly states that the flash head and stand are not included. Check the package contents for your chosen model, and make sure the mount fits your light.

Does a softbox or studio light need a CE marking?

Not necessarily for every product. According to the European Union’s Your Europe website, CE marking is only required when the applicable harmonised EU rules say so. Check which rules apply to the specific light and softbox rather than assuming both have the same requirement.

What can you do if a set bought online doesn’t match its description?

For a consumer purchase in the Netherlands, the seller must provide a complete product with the promised features, as described by the Dutch government. For online purchases from a business, you’ll also generally have a 14-day cooling-off period, although conditions and exceptions may apply.