Who is this choice relevant to?

Maker with a fixed camera setup

You want to photograph an etching from a stable setup without touching the camera for every shot. Wired control, wireless control and a compatible app are all options; check which one works with your camera.

User of a shared workbench

You want to take photos from where you’re working and need to consider whether a cable would cross a shared workspace. Choose wireless control only if your camera supports the specific accessory.

Photographer who already has app control

Before buying a separate accessory, check whether your camera and phone can already trigger the shutter remotely. Canon describes Camera Connect as an option for a wide range of Canon cameras.

What should you look for when choosing?

Wired shutter release

Suitable if: your camera supports the shutter release connection and you can route the cable safely within your workspace.

Consider: you won’t need a wireless connection, but the cable could get in the way in a shared workspace.

Wireless camera remote

Suitable if: your camera model supports the specific remote and you want to take photos without a control cable.

Consider: check compatibility and whether pairing is required. Bluetooth alone doesn’t confirm that the accessory will work with your camera.

Compatible camera app

Suitable if: your camera’s shutter can be operated using a compatible app and you’d rather use your phone or tablet.

Consider: the controls available vary by camera model, so test the connection and the features you need.

What to consider Check before buying Who is this important for?
Compatibility Compare the full camera model with the compatibility information. For a cable, also check the connection and whether an adapter is needed. I want to avoid buying a shutter release that won’t work with my camera. Around 33% of consumers make this combination their top priority.
Taking photos without touching the camera Check that your chosen control method can trigger your camera’s shutter remotely, then try it with your intended setup. I want to operate the shutter without touching the camera. Around 27% of consumers give this need priority.
Sharing the workspace Consider where you’ll be standing and where others will be walking. Check whether you can keep a cable out of the shared workspace. I want a control method that works when sharing a room with others. Around 20% of consumers prioritise this consideration.
Additional controls or components Test any app control you already have and, if you’re choosing a physical shutter release, check which cable or adapter you’ll need. I want to know whether my existing equipment is enough before buying anything else. Around 20% of consumers make this their top priority.

Common mistakes when choosing

  • Assuming accessories from the same camera brand are compatible

    Manufacturers list the camera models that are compatible, and some combinations also require an adapter.

    Before buying, check the full camera model, accessory model, connection and whether an adapter is needed.

  • Confusing a Bluetooth selfie remote with a camera shutter release

    The camera remotes covered here are designed for specific cameras. Bluetooth alone doesn’t confirm that an accessory can trigger your camera’s shutter.

    Look up your exact camera model in the compatibility information for the specific accessory.

  • Choosing a cable without considering the shared workspace

    Wired control creates a connection between you and the camera, and where that cable runs may matter in a shared space.

    Consider where you’ll be standing and where others will be working before choosing between a cable you can route safely and wireless control supported by your camera.

Brands to consider

Canon

Canon offers the BR-E1 for specific cameras. Camera Connect is another option for a wide range of compatible Canon cameras.

  • Canon specifies Bluetooth control and a range of up to 5 m for the BR-E1.
  • The stated range is a manufacturer’s specification, not a guarantee of performance in every workshop. Check that your exact camera is compatible.

Nikon

The ML-L7 is a Bluetooth remote for specific Nikon cameras.

  • Nikon lists separate buttons for the shutter and video recording.
  • Compatibility is limited to specific cameras; the Nikon brand name alone isn’t enough to determine whether it will work.

Sony

The RMT-P1BT is a wireless Bluetooth remote for cameras that support this accessory.

  • According to Sony, the model uses the camera’s built-in Bluetooth receiver, with no control cable or additional receiver required.
  • Sony gives the communication range as approximately 5 m, depending on local conditions. This range isn’t guaranteed in every workshop.

Fujifilm

The RR-100 is a wired shutter release for the X and GFX cameras listed by Fujifilm.

  • Fujifilm lists a 2.5 mm connection, focus and shutter controls, and a locking button.
  • Fujifilm specifies that the X-S10 and X-T200 require an adapter. Check your camera’s compatibility and the components you’ll need.

JJC

The S-C2 is a wired model that JJC lists as compatible with specific Canon cameras.

  • JJC lists a two-stage button, a lock and battery-free operation for the S-C2.
  • These details apply to the S-C2. Don’t assume other JJC cables have the same connection or camera compatibility.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I check whether a shutter release will work with my camera?

Compare your full camera model with the compatibility information for the exact accessory. For wired control, also check the connection and whether you need an adapter. For the RR-100, Fujifilm specifies a 2.5 mm to 3.5 mm adapter for the X-S10 and X-T200.

How can I set up for taking photos at a shared workbench?

First secure your camera setup, then try the supported control method from where you intend to work. If you’re using a cable, route it so others won’t need to work around it. A suitable wireless control removes the need for a control cable. A remote lets you take photos without touching the camera, but it doesn’t replace a stable setup.

What do I need to prepare when using a wired shutter release?

Before use, check that the plug, any adapter and the cable are suitable for your camera and where you’ll be working. Fujifilm says the RR-100 comes with a right-angle plug extension cable; JJC describes the S-C2 as a model that doesn’t require a battery.

What returns policy applies to online purchases in the Netherlands?

According to the Government of the Netherlands, online purchases from a business are often covered by a 14-day cooling-off period. This doesn’t automatically apply to purchases from a private seller, so check the terms of the specific sale.

Can I publish a photo of someone else’s etching?

Don’t assume you’re free to publish the photo just because you took it. The Government of the Netherlands distinguishes between making copies for personal use and distributing or making copyright-protected work publicly available. The latter generally requires permission from the creator. Check who holds the rights to the etching and what permission is required for your intended use.