For enamel pins in a craft portfolio, first choose a lens based on your preferred framing and maximum magnification, then select a compatible mirrorless camera body. A standard kit zoom isn’t automatically suitable for capturing small details: also compare the working distance available for your lighting, the depth of field across raised details, and the cost of the complete setup. A 1:1 macro lens is especially useful if you want to make details fill the frame.
Who is this guide for?
Detail photographer
You want to show small lines, clasps or transitions in the enamel clearly in your portfolio. So first decide what magnification and working distance suit your framing. Sony Netherlands and Nikon Netherlands describe these lens choices for the specific macro lenses they mention.
Photographer creating consistent collection shots
You photograph several glossy pins for one portfolio and want a repeatable setup, suitable lighting and consistent colours. Canon Netherlands and Adobe outline points to consider when photographing products and setting the white balance.
Photographer working to a limited kit budget
You want to buy a complete, practical setup without mistaking a kit zoom for a macro lens. The Consumers’ Association advises checking the lens mount and compatibility, so also confirm exactly which lens comes with the kit.
What should you consider when choosing?
Start with your preferred framing. Then choose the lens’s magnification and working distance, and check that the complete camera setup meets your needs.
Whole pins and the occasional detail
Choose this if: you mainly photograph the whole pin and its surrounding composition. Test the exact lens to see whether it can achieve the detail framing you want.
Trade-off: according to Canon, the standalone Canon RF 35mm F1.8 Macro offers a maximum magnification of 1:2. This specification doesn’t apply to a different kit zoom.
Make small details fill the frame
Choose this if: you want stamps, edges or enamel details to fill a large part of the photo. Sony, Nikon and Fujifilm specify 1:1 magnification for the standalone macro lenses discussed here.
Trade-off: the stated working distance varies by lens. Sony lists approximately 2 cm for the SEL30M35; Nikon lists approximately 5 cm from the front of the MC 50mm. Allow for the space your lighting needs.
| Buying concern |
What should you check? |
Who is this important to? |
| Capturing small details |
Compare the maximum magnification of the exact lens with your preferred framing. Also check the working distance to ensure there’s room around the lens. |
If I want to show small stamps or enamel lines at a large size, I’ll compare the lens’s magnification first. Around 33% of consumers say magnifying details is their main buying concern. |
| Managing colour and reflections |
Assess the lighting, camera angle and white balance together. Test for reflections on one of your own glossy pins. |
For a series of glossy pins, I want to assess colours and reflections under similar lighting. Around 27% of consumers prioritise controlling colour and reflections. |
| Getting raised details in focus |
Take test shots with different apertures and a stable setup. Check that the important parts of the pin are in focus. |
If my pins have raised edges or clasps, I want to see which parts can be in focus at the same time. Around 20% of consumers prioritise sharpness across raised details. |
| Putting together a complete setup |
Check the exact kit contents, lens mount and whether you’ll need a separate macro lens. |
When choosing a complete setup, I want to avoid finding that the supplied lens can’t handle the detail shots I want. Around 20% of consumers see the cost and practicality of the whole setup as their main concern. |
Common buying mistakes
-
Assuming a kit zoom has the magnification of a different lens
A magnification specification applies to the exact lens, not automatically to every lens in the same camera system.
A suitable macro lens may need to be bought separately from the camera body, so include the complete setup in your budget.
Make a note of the full lens name and check the maximum magnification of the lens actually supplied with the kit.
-
Comparing only the minimum focusing distance
This distance is measured from the sensor and doesn’t tell you directly how much space is left in front of the lens for lighting.
Compare the working distance at your preferred magnification and check that you can light the pin without unwanted shadows.
-
Confusing image stabilisation with sufficient depth of field
Close-ups require precise focusing; stabilisation doesn’t change how much of a pin appears in focus.
Assess test shots of the pin’s raised details and use a stable setup if needed.
Relevant brands to consider
The examples below refer to specific camera and lens combinations; a kit name doesn’t confirm that the macro lens mentioned is included.
Canon
The EOS R50 with a separate RF 35mm F1.8 Macro is a combination to consider if you want to assess whether 1:2 is enough for your framing.
- Canon lists focus bracketing for the EOS R50 and a maximum magnification of 1:2 for the separate RF 35mm F1.8 Macro.
- The RF-S 18-45mm kit zoom is a different lens; the RF 35mm’s macro magnification doesn’t apply to it.
Sony
The ZV-E10 II with a separate E 30mm F3.5 Macro is an E-mount combination for anyone looking for 1:1 magnification.
- Sony specifies 1:1 magnification for the SEL30M35 and confirms that the ZV-E10 II is compatible with E-mount lenses.
- Sony lists a working distance of approximately 2 cm for the SEL30M35. Bear in mind the limited space in front of the lens when positioning your lighting.
Nikon
The Z50II with a separate NIKKOR Z MC 50mm f/2.8 is a combination worth comparing if you want 1:1 magnification and also need to consider the working distance.
- Nikon specifies 1:1 magnification for the MC 50mm and a distance of approximately 5 cm from the front of the lens to the subject.
- These macro lens specifications apply to the standalone lens. Check which lens is supplied with a specific Z50II kit.
Fujifilm
The X-S20 with a separate XF30mmF2.8 R LM WR Macro is an option to compare if you want to capture other photo or video subjects as well as portfolio shots.
- Fujifilm specifies 1:1 magnification for the separate XF30mm and in-body image stabilisation for the X-S20.
- Check the exact contents of an X-S20 kit; don’t assume the separate macro lens is included.
Joybuy product picks
The Joybuy options shown are mirrorless cameras supplied with a 16–50mm zoom. Check whether the lens included with your chosen kit can capture your pin details at a large enough size.
No image available
Sony ZV-E10 + 16-50mm Zoom Black
The supplied 16–50mm power zoom may suit portfolio shots with varied framing; test whether it can achieve the detail framing you want.
The product description lists a 24.2 MP APS-C sensor. Check the magnification of the exact kit lens before assuming it’s suitable for small details.
Joybuy
No image available
Sony Alpha A6100 + 16-50mm f/3.5-5.6 OSS II
The 16–50mm zoom lens combination may suit portfolio shots with different framing; test with your pin to see whether you can capture the detail framing you want.
The product description lists a 24.2 MP APS-C sensor. Check the magnification of the exact lens supplied and don’t assume it has the specifications of a separate macro lens.
Joybuy
Frequently asked questions
Is a kit zoom enough for your portfolio?
That depends on the framing you want. Check the maximum magnification of the exact lens supplied, using a pin at your preferred image size; the specification of a separate macro lens doesn’t automatically apply to the kit zoom.
What’s the difference between minimum focusing distance and working distance?
The minimum focusing distance is measured from the sensor; the working distance is the space between the subject and the front of the lens. For lighting a small pin, the latter is particularly important in practice.
How can you keep details and colour consistent across a series of photos?
Use a stable camera setup, compare test shots at different apertures and keep the lighting consistent. If the colours look off, check the white balance; this doesn’t guarantee that a particular camera will eliminate reflections.
Who can help if a camera you bought online develops a fault too soon?
For a consumer purchase in the Netherlands, the seller is responsible for the statutory guarantee if the product doesn’t meet what you could reasonably expect, according to ACM ConsuWijzer. Online purchases generally come with a 14-day cooling-off period after delivery, subject to legal exceptions.