Who is this relevant to?

Sellers of finely detailed embroidery

If individual stitches and the direction of the thread need to be visible, compare the magnification of the complete camera and lens combination, and check that the texture remains sharp. OM SYSTEM and Nikon provide examples of close-up capabilities and macro lenses.

Sellers with lots of colour variations

If you regularly photograph different fabrics and thread colours, consistent lighting and a repeatable white balance are important. Adobe describes white balance as a way to make colours in a digital photograph look more realistic.

Beginners with a small photography setup

If you want to take both overview and close-up shots without unnecessary equipment, compare the space needed for the camera and lighting, and first try the crop you can achieve with your existing equipment. OM SYSTEM describes a close-up capability of up to 1 cm for the TG-7.

What should you consider when choosing?

Compact camera with close-up mode

A good fit if: you want to capture details quickly without changing to a separate lens.

Bear in mind: the lens is fixed, so check whether it can also take your overview shots. A short shooting distance can also leave less room for lighting.

Mirrorless camera with a macro lens

A good fit if: you want to magnify individual stitches and choose a different lens for wider shots.

Bear in mind: the camera body and kit zoom do not automatically make a macro setup; check which lens is actually included.

Try your current equipment first

A good fit if: you are still deciding what level of detail or sharpness your online shop photos need.

Bear in mind: a trial with your current camera or phone will show what it can achieve for your final product display, but it does not guarantee that every stitch will appear large enough in the frame.

Consideration What to check before buying Who is this most important for?
Stitch detail Compare the maximum reproduction ratio of the specific lens or the close-up mode of the fixed-lens camera, and take a test shot. If I need to show small stitches clearly, I want to know how large they will appear in the frame. Around 31% of consumers prioritise stitch detail.
Colour consistency Check whether you can adjust the white balance, and compare shots taken in the same, even lighting. If I sell lots of colour variations, I want the thread and fabric to look consistent across successive photos. Around 25% of consumers prioritise colour consistency.
Sharpness and repeatability Check the raised and recessed parts of the embroidery; consider whether a tripod and, if needed, multiple focus points fit your workflow. If I regularly take product photos, I want to keep the texture sharp and my setup consistent. Around 25% of consumers also prioritise this.
Kit and workspace Check the exact kit contents, lens mount and space in front of the lens for your light source. If I need to keep my photography setup small, I weigh up a fixed lens against the flexibility of separate lenses. Around 19% of consumers prioritise kit size and workspace.

A lens specification alone does not tell you how sharp or true to colour a photo of your embroidery will be. OM SYSTEM states that the Tough TG-7 can take close-ups from as near as 1 cm. Nikon gives the NIKKOR Z DX MC 35mm f/1.7 a maximum reproduction ratio of 0.67×, described as the equivalent of 1:1 in FX format; Canon lists 0.5× for the RF 35mm F1.8 MACRO IS STM. Take a test shot of a representative stitch, and check the full crop, exposure and colour at the same time.

What to look out for when buying

  • Comparing only the camera body or the word ‘macro’

    The lens also affects how large the stitches appear in the frame. For the Canon RF-S 18–45mm kit zoom, Canon lists a maximum of 0.26× at 45 mm when focusing manually. This is different from the figure for the separate RF macro lens.

    Check the exact kit contents, the mount and the magnification of the lens you will actually use to take photos.

    A suitable macro lens may be a separate part of the kit.

  • Confusing the minimum focusing distance with the space in front of the lens

    The focusing distance may be measured from a different reference point than the clear space between the front of the lens and the embroidery. When taking a close-up, the camera or lens can also block the light.

    Check the point from which the distance is measured, and try positioning the camera above your work surface with the light source you intend to use.

    You may need to position the camera and lighting differently so they do not get in each other’s way.

  • Assuming a sharp close-up means a consistent set of true-to-colour product photos

    Changes in lighting can make the same thread colour look different. And when shooting close up, it is not a given that every raised stitch will be in focus.

    Test the colour and sharpness in several places on the embroidery, and keep the lighting, camera position and white balance as consistent as possible.

    An inconsistent setup can mean extra time spent retaking photos or correcting colours.

Brands to compare

OM SYSTEM

The Tough TG-7 offers a fixed-lens option for close-ups without a separate macro lens.

  • OM SYSTEM states that it can take close-ups from as near as 1 cm and has a sensor of around 12 megapixels.
  • A short shooting distance does not guarantee that the stitch will be properly exposed or in focus in every lighting setup. The lens is not interchangeable.

Nikon

The Z50II can be paired with the separately selected NIKKOR Z DX MC 35mm f/1.7 for close-up shots.

  • Nikon specifies a maximum reproduction ratio of 0.67× for this lens, described as the equivalent of 1:1 in FX format.
  • This ratio is not, in itself, an optical reproduction ratio of 1:1; also check which lens is included with the kit on offer.

Canon

The EOS R50 is a mirrorless camera body compatible with a range of RF and RF-S lenses.

  • Canon lists a maximum of 0.5× for the RF 35mm F1.8 MACRO IS STM.
  • For the RF-S 18–45mm kit zoom, Canon lists a maximum of 0.26× at 45 mm when focusing manually. So check which lens is included in the kit on offer.

Sony

The E-mount Alpha 6400 can be paired with the separately selected APS-C E 30mm F3.5 Macro lens (SEL30M35).

  • Sony specifies a 1:1 reproduction ratio for the lens.
  • Sony states a minimum focusing distance of 9.5 cm; check how much room you have left for lighting in your own setup.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need a mirrorless camera to photograph individual embroidery stitches?

No, a mirrorless camera is not the only option. OM SYSTEM states that the TG-7 has a built-in close-up capability of up to 1 cm. Take a test shot with your own fabric and lighting. Compare a mirrorless camera with a macro lens if you want more choice of lens and framing.

How can you stop raised stitches from appearing out of focus?

Keep the embroidery still and check both the raised and recessed stitches at the magnification you intend to use. Tamron Europe describes a tripod as a useful aid for product photography; Canon explains that with a shallow depth of field, part of the subject may remain out of focus. So check more than just the centre of the shot.

How can you keep recurring product photos consistent?

Keep the background, camera position and lighting as consistent as possible, and check the white balance when the light changes. Adobe describes white balance as a way to make colours in a digital photograph look more realistic.

Which additional items and warranty terms should you check?

Compare the body and the exact lens included as one set, and check whether you also need a macro lens, tripod or lighting. Business.gov.nl states that the statutory consumer guarantee does not apply to business-to-business sales; so check in what capacity you are buying and which terms apply.

Can you significantly alter the colours of embroidery on your product page?

Make sure the edited photo does not give a misleading impression of the embroidery on offer. The Netherlands Authority for Consumers and Markets (ACM) states that sellers must not mislead consumers; whether a particular product presentation meets this requirement depends on the image and its context.