Drum editor at a shared desk
Usually edits existing recordings on headphones and wants to adjust the listening volume themselves without disturbing colleagues through speakers.
You don’t automatically need an external audio interface to edit existing drum recordings. First, check whether your computer’s headphone output and your software do the job. If you also record with several microphones at once, count how many microphone inputs you need. And if you want different listening mixes, check the routing available for each output rather than simply counting the connections.
Usually edits existing recordings on headphones and wants to adjust the listening volume themselves without disturbing colleagues through speakers.
Wants to record several microphones at once onto separate tracks. Audient and Behringer say some interfaces have eight built-in microphone preamps; the number you need depends on how many microphones you use simultaneously.
For example, wants their own headphone mix and a different mix for a colleague or monitors. Focusrite and Audient describe models with different output and cue routing, so check the features of the specific model.
A good fit if: you only edit existing tracks and your current headphones and software work as you want them to.
Bear in mind: this won’t give you extra microphone inputs or independently routable outputs.
A good fit if: you want dedicated headphone volume control and don’t need a separate mix for a second listening destination. The Focusrite Scarlett 2i2 4th Gen has two microphone inputs, one headphone output and two line outputs.
Bear in mind: according to Focusrite, the headphone output and line outputs 1–2 on the Scarlett 2i2 4th Gen share the same signal feed.
A good fit if: you want extra physical line outputs, as on the MOTU M4, or an ADAT input and assignable cue mix, as Audient describes for the iD14 MKII.
Bear in mind: the MOTU M4 and Audient iD14 MKII each have two built-in microphone preamps; ADAT expansion requires compatible external equipment.
A good fit if: you actually want to record several drum microphones simultaneously onto separate tracks. Audient lists eight preamps for the EVO 16; Behringer specifies eight microphone inputs for the UMC1820.
Bear in mind: if you’re only editing, the extra recording features and space required may go unused.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Quiet, controllable listening | Check the headphone connection and whether you can adjust the headphone volume independently. Also consider the fit and noise isolation of the headphones themselves. | I want to edit existing drum tracks at the office on headphones and control the listening volume myself. Around 33% of consumers prioritise quiet, controllable listening. |
| Simultaneous microphone inputs | Count how many microphones you want to record separately at the same time. Distinguish between built-in analogue inputs and expansion via ADAT. | If I also want to record a drum kit using several microphones at once, each source needs to be recorded onto its own track. Around 27% of consumers prioritise this recording need. |
| Separate listening routes | Check the manual to see which mix can be sent to the headphones and line outputs, and whether this requires software settings. | I want a colleague or a second listening position to hear a different mix from the one in my headphones. Separate routing is the top priority for around 20% of consumers. |
| Computer and workspace | Check the operating system, required driver, available USB port, cables, power supply and the space on your desk. | At a shared desk, I want to know in advance whether the interface will work with my computer and can be positioned conveniently. Around 20% of consumers prioritise compatibility, power or placement. |
The number of tracks already recorded doesn’t determine how many microphones you can record at once. Inputs matter most if you want to record your own material.
First decide whether you want to use several microphones simultaneously, then count how many separate microphone inputs you’ll need.
If you’re only editing, extra recording features may go unused and take up more desk space or require a separate power supply.
The headphone output and line outputs 1–2 on the Focusrite Scarlett 2i2 4th Gen share the same feed. Other models may offer different routing.
Check the manual for the exact model to see which playback channels and cue mixes can be sent to each output.
According to the World Health Organization, the effects of noise depend on both volume and listening time.
Start at a low listening volume, take breaks, and see whether the fit or noise isolation of your headphones helps reduce the impact of background noise.
According to Focusrite, the Scarlett 2i2 4th Gen is a compact option for one listening feed, while the Scarlett 18i20 4th Gen is a separate product range with eight built-in microphone preamps.
According to its product specifications, the MOTU M4 is a compact interface with four line outputs, two microphone preamps and one headphone output.
According to Audient, the iD14 MKII has two microphone preamps, four line outputs, an ADAT input and app-based cue mix assignment. The EVO 16 is a separate range with eight built-in preamps.
The UMC1820 is a 19-inch interface with eight built-in microphone preamps and two headphone connections.
The Studio 1824c is worth comparing if you’re looking for eight microphone preamps, two headphone outputs and ADAT expansion, according to PreSonus specifications.
Check the output assignments and start at a low volume. Audient warns that DAW thru on the iD14 MKII bypasses the volume control for that output; an assignable cue mix is another option on this model.
Consider both volume and listening time. The World Health Organization mentions well-fitting or noise-cancelling headphones as a possible way to help avoid turning up the volume as quickly in noisy environments; a volume setting on the interface doesn’t directly measure the sound exposure at your ear.
Arboportaal states that employers must provide hearing protection when the daily dose exceeds 80 dB(A), and that additional obligations apply above 85 dB(A). These are workplace exposure rules, not a prescribed volume setting or specification for every interface.
According to Ondernemersplein, CE marking is compulsory when a product group is subject to a CE requirement. For an applicable online consumer purchase, the Dutch government generally specifies a 14-day cooling-off period; purchases from private individuals aren’t covered by the stated distance-selling rules.