Who should consider this microphone choice?

Singer in a reverberant rehearsal room

You want your voice to stay up front when the room or equipment is audible. Start by adjusting the microphone distance and direction, then make a test recording. Shure also highlights the importance of placement, room acoustics and recording technique.

Singer who wants to capture detail

You’re recording solo in a quiet room and want to capture subtle details in your voice. First, listen to a test recording made where you plan to record; the result also depends on the room and your voice.

Singer with a simple computer setup

You’re choosing a microphone partly based on the connection you can use now, and may want to record through an interface later. RØDE lists both USB and XLR connections for the NT1 5th Generation.

What should you look for in a vocal microphone?

Dynamic with XLR

A good fit if: you can sing close to the microphone, the room is audible, or you want to use the same model during rehearsals.

Bear in mind: you’ll need a compatible XLR input and enough gain. This type won’t block out background noise either.

Condenser with XLR

A good fit if: you want to capture detail in a suitably quiet room and have a compatible interface or mixer.

Bear in mind: room noise and the exact model’s power requirements. The Audio-Technica AT2020 requires 48 V phantom power.

Condenser with USB and XLR

A good fit if: you want to record straight to a computer and have the option of using an XLR connection too.

Bear in mind: the connection won’t eliminate reverb. Check that it’s compatible with your computer, software and setup. RØDE lists both connections for the NT1 5th Generation.

What to consider What to look for when buying Who is this important for?
Room noise Make a test recording in the place you plan to use the microphone. Pay attention to the polar pattern, distance and noise between vocal phrases. Shure identifies placement and room acoustics as important factors. If the rehearsal room is audible in the recording, I want to know how my voice and the room sound together. Around 33% of consumers put room noise first.
Vocal detail Compare recordings made in the same place and check whether you need a suitable pop filter. RØDE lists a pop filter for the NT1 5th Generation. I want to assess subtle details in my voice, so I listen back to a test recording first. Around 27% of consumers prioritise vocal detail.
Connection and power Check the exact model’s connection and your equipment. According to Audio-Technica, the AT2020 requires 48 V phantom power. If my existing computer, interface or mixer is a deciding factor, I first check which connections and power are available. Around 20% of consumers make connectivity their top priority.
Practical setup Compare the accessories included with each version. RØDE lists accessories such as a shock mount, pop filter, and USB and XLR cables for the NT1 5th Generation. I want to set up my recording space with ease, so I check which parts I already have and what else I need. Around 20% of consumers prioritise ease of setup.

Common buying mistakes

  • Assuming a dynamic microphone provides complete sound isolation

    Even with a directional model, microphone placement and the sound of the rehearsal room can still affect the recording.

    Record a short vocal passage and a pause between phrases. Then compare the recording with the microphone in different positions and at different distances.

  • Buying an XLR condenser microphone without compatible power or an input

    According to Audio-Technica, the AT2020 requires 48 V phantom power.

    Before buying, check the requirements for the exact model and make sure your interface, mixer or power supply is compatible.

  • Assuming every model comes with the same accessories

    The listed contents vary by model: Shure lists a built-in pop filter for the SM58, while RØDE lists accessories such as a pop filter and shock mount for the NT1 5th Generation.

    Compare what’s included with the exact version against what you need for your recording space.

Brands to consider

Shure

The SM58 is an example of a dynamic cardioid vocal microphone for rehearsals and studio recordings.

  • Shure lists a built-in pop filter, a vocal-tailored response and a robust construction for the SM58.
  • These model specifications don’t mean you’ll get the same results with every voice or in every rehearsal room.

RØDE

The NT1 5th Generation is a condenser microphone with USB and XLR connections.

  • According to RØDE, this model comes with accessories including a shock mount, pop filter, and USB and XLR cables.
  • Check that the connections, accessories and setup are compatible with your computer and recording equipment.

Audio-Technica

The AT2020 is a cardioid XLR condenser microphone for recording setups with compatible equipment.

  • Audio-Technica lists a 48 V phantom power requirement for the AT2020.
  • Check whether your interface, mixer or separate power supply can provide the power this model needs.

Sennheiser

The e 835 is a dynamic cardioid vocal microphone for singers who use a handheld model during rehearsals.

  • Sennheiser lists a wired 3-pin XLR connection and a robust housing for the e 835.
  • Check the model name: versions with switches have a different designation.

AKG

The P120 is a cardioid XLR condenser microphone, offering another option for this type of recording setup.

  • AKG lists a switchable low-cut filter and an attenuation switch for the P120.
  • These controls alone don’t guarantee better results in every rehearsal room.

USB microphones for voice recording on Joybuy

These product picks are aimed at computer-based voice recording setups. They include a USB condenser microphone for vocals and a compact Razer desktop microphone.

USB condenser microphone with cardioid pattern

USB condenser microphone with cardioid pattern

An option for recording solo vocals over USB if you’re looking for the stated cardioid pickup pattern and setup accessories.

The product information lists monitoring via a 3.5mm connection and includes a boom arm, shock mount and pop filter.

Joybuy
Razer SEIRÉN V3 MINI Quartz USB microphone

Razer SEIRÉN V3 MINI Quartz

A compact USB desktop microphone for recording voice on a computer.

The product information lists a supercardioid pickup pattern, while the product name mentions tap-to-mute.

Joybuy

Frequently asked questions

Can I connect an XLR vocal microphone directly to my computer?

First, check the connection and power requirements for the exact model and your computer. The Audio-Technica AT2020 is an XLR model that requires 48 V phantom power; RØDE also lists USB for a direct computer connection on the NT1 5th Generation.

How should I position a microphone when recording solo vocals?

Point a cardioid microphone towards your voice and, where possible, keep unwanted sound sources outside its main pickup direction. RØDE says the gold dot marks the front of the NT1 5th Generation and lists an included pop filter. Listen back to a recording made where you plan to record.

What warranty applies to a microphone I buy in the Netherlands?

In the Netherlands, the statutory warranty has no fixed duration. According to the Dutch government, the seller is your point of contact if a product doesn’t meet the terms of the agreement; this is separate from any manufacturer’s warranty.

Can I return a microphone bought online?

When you buy from a business online, you usually have a statutory 14-day cooling-off period. Exceptions and the specific circumstances of the purchase may affect this, so check the terms that apply to your purchase. The Dutch government explains this cooling-off period for distance purchases.

Which product regulations apply to microphones in the Netherlands?

Applicable European product regulations apply to electrical and electronic equipment sold in the Netherlands. Business.gov.nl explains that a CE mark is a declaration made by the manufacturer, not a quality mark for recording performance. The requirements depend on the specific product and the role of the market participant.