Home narrator recording in a noisy room
You’re recording a single voice while sounds from inside or outside the flat compete for attention. You want to know how speaking close to the microphone and using a directional model might work in your space.
If you’re recording a single voice up close in a noisy flat, a directional dynamic microphone is a sensible first option to try. However, no type of microphone will make background noise disappear on its own. USB is convenient for connecting directly to a computer; USB/XLR gives you the option of using an audio interface too. A condenser microphone is worth considering if you can make your recording space quiet enough and want to prioritise vocal detail.
You’re recording a single voice while sounds from inside or outside the flat compete for attention. You want to know how speaking close to the microphone and using a directional model might work in your space.
You want to record on a computer without a separate audio interface and hear yourself as you record longer chapters.
You can choose a quieter time or a less noisy spot, and want to weigh vocal detail against the chance of room noise being audible in the recording.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Room noise | Check the polar pattern, which side to speak into and how the microphone is mounted. Make a test recording where you plan to record. | If I’m recording in a noisy flat, I want to stop background noise from overwhelming the narration; around 36% of consumers prioritise reducing audible room noise. |
| Connection | Check the USB and XLR connections, which cables you’ll need, and whether the features you want to use work with your chosen connection. | I want to record on my computer without a separate interface; a direct connection is the top priority for around 29% of consumers. |
| Consistent chapters | Check whether it has direct headphone monitoring and which stand, mount and accessories are included with the version on offer. | For long sessions, I want to hear myself and keep the microphone in the same position each time; around 21% of consumers prioritise a consistent setup for recording successive chapters. |
| Vocal detail | Make a test recording at a quiet time and check that you’re speaking into the correct side of the microphone. | If I can make the recording space quiet enough, I want to give vocal detail more weight; around 14% of consumers say this is their top priority. |
Even with a dynamic microphone, distance and room acoustics still matter; the type of microphone won’t remove background noise on its own.
Make a short test recording in your usual spot and listen to the pauses between sentences too.
You may need extra time to find a quieter time to record or record chapters again.
RØDE describes the PodMic as an XLR model and the PodMic USB as a model with USB-C and XLR. This means the equipment you need to record on a computer will differ.
Check the full model name and connections before choosing your complete recording setup.
For computer recording with the XLR-only PodMic, RØDE specifies a suitable XLR cable and audio interface.
Shure says that the MV7+’s digital processing is not applied to the analogue XLR signal.
Choose your connection based on the features you actually want to use while recording.
Using a different connection may call for a different workflow or additional post-production.
The MV7+ is a dynamic USB-C/XLR microphone for recording a single voice up close, with headphone monitoring.
The range includes dynamic models with USB and/or XLR, as well as the NT1 5th Generation, a condenser microphone with USB/XLR.
According to Audio-Technica, the ATR2100x-USB combines a dynamic cardioid capsule with USB-C, XLR and direct headphone monitoring.
The Q2U is a dynamic USB/XLR microphone sold with various accessories.
This selection at Joybuy ranges from USB microphones to sets with transmitters and a receiver. Check that the connection and setup suit your computer and recording space.
No image available
According to the product name, this set includes 2 TX, 1 RX and a charging case; check how the receiver connects to your recording device.
No image available
The product name identifies this as a USB condenser microphone; check that the connection is compatible with your recording device.
No image available
The product name lists 2 TX, 1 RX and a charging case; check which connections the receiver offers for your recording device.
No image available
The product name describes a USB microphone with Tap-to-Mute in the Quartz finish; check that the connection and placement suit your recording setup.
Speak from your usual recording spot and listen to the pauses between sentences too. For the PodMic USB, RØDE recommends a distance of around 5–10 cm, with the top facing your mouth; don’t assume the same distance applies to other models. Try to keep your position as consistent as possible between chapters.
It depends on the model and connection. Shure says that the MV7+’s XLR signal doesn’t receive built-in digital processing, such as real-time noise reduction. So check which features are available with the connection you plan to use.
For the XLR-only RØDE PodMic, RØDE specifies an XLR cable and audio interface. Check what you need for the specific model and compare the complete setup, not just the microphone.
According to ACM ConsuWijzer, in the Netherlands you have a statutory guarantee in addition to any manufacturer’s warranty. If a product doesn’t perform as you could reasonably expect during normal use, the seller is responsible for providing an appropriate solution free of charge, such as a repair, replacement or refund. There isn’t one fixed statutory guarantee period that applies to every microphone.
According to the Dutch government, you need permission from the creator to use someone else’s copyrighted book. You must not distribute or make a private copy available to the public, so consider the rights you need separately from your choice of microphone.