Who is a dual monitor setup for?

For anyone switching between a dashboard and a report

If you switch between your main tasks during the working day, it can help to be able to adjust each screen independently. The Arboportaal recommends a well-adjustable workstation and points out that screens can also be positioned too high.

For anyone short on desk space

An arm can free up desk space by lifting monitor bases off the desktop, but the clamp or grommet mount must fit your desk. Also check how much room the arm needs behind the desk; according to Neomounts, the short upper arm of the Neomounts DS70-810BL2 is designed for use close to a wall or partition.

For anyone using two different screens

Check the VESA pattern and weight of each screen separately, then compare them with the limits of your chosen arm. Manufacturers such as Neomounts and Ergotron provide model-specific mounting and weight capacity information; details for one variant don’t automatically apply to another.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Fit and weight capacity For each screen, compare its weight without the stand and its VESA pattern with the specifications for the exact model. Check for separate limits for curved or ultrawide screens. I want to be sure both screens will fit, even if they’re not the same. Around 33% of consumers give compatibility and weight capacity for each screen top priority.
Viewing position and adjustment Check whether each screen can be adjusted separately for height and depth, and whether it can swivel. Also check that they’ll fit side by side in the position you want. If I switch between a dashboard and a report, I want to be able to move the screens independently or read a report in portrait orientation. Around 27% of consumers put adjustability first.
Mounting and desk space Measure your desktop and check that the clamp or grommet mount suits its construction and edge. Allow for clear space behind the screens. If desk space is tight, I want to know in advance whether the mount will fit and the arms will move freely. Around 20% of consumers say mounting and available space are their main considerations.
Purchase and aftercare Check which mounting parts are included, whether you need a suitable VESA adapter and what warranty terms the seller or manufacturer offers. I want to know whether I’ll need any extra parts and who to contact if something goes wrong. Around 20% of consumers focus mainly on additional parts and aftercare.

Common buying mistakes

  • Looking only at the screen size

    The screen size in inches alone won’t tell you whether a monitor will fit an arm. The VESA pattern and weight of each screen matter too; curved or ultrawide models may have a separate weight limit.

    Weigh both screens without their original stands and check the VESA size and limits for the exact arm variant for each screen.

  • Assuming every desk clamp will fit

    An adjustable arm needs a suitable mounting point and enough room to move. The shape and edge of your desktop, as well as its distance from the wall, can therefore affect installation.

    Measure your desktop and the space behind it, and follow the mounting requirements for your chosen model.

  • Confusing a stated warranty period with the statutory guarantee in the Netherlands

    Joybuy’s product listing for the Neomounts DS70-250BL2 states a two-year warranty. The Dutch government says there is no fixed statutory guarantee period in the Netherlands, so don’t take this product listing as a general statutory term.

    Check the manufacturer’s and seller’s terms separately, and ask the seller for a solution if the product doesn’t work properly.

Brands to compare

Neomounts

The DS70-810BL2 and DS70-250BL2 are dual gas-spring arms for side-by-side screens, with different mounting and space requirements.

  • According to the product specifications, both models have a 180° stop and support VESA 75×75 or 100×100 mm. The DS70-810BL2 has a short upper arm for setups with limited space behind the desk; the DS70-250BL2 has Topfix mounting.
  • Weight limits vary. Neomounts specifies a maximum of 9 kg per flat screen and 8 kg per curved or ultrawide screen for the DS70-250BL2. Check the specifications for the exact variant.

StarTech.com

According to StarTech.com, the ARMDUAL30 is an articulating dual arm that can hold screens side by side or, subject to different screen size limits, one above the other.

  • StarTech.com specifies a maximum weight capacity of 9 kg per arm.
  • The manufacturer specifies screens up to 30 inches for side-by-side placement and up to 24 inches for stacked placement. Choose your layout with the relevant limit in mind.

Ergotron

According to Ergotron, the LX Dual Side-by-Side Arm is designed for two screens side by side, with arms that move independently.

  • For the variant reviewed, Ergotron specifies 3,2–9,1 kg per monitor and VESA 75×75 or 100×100 mm.
  • Ergotron says that a monitor deeper than 8,9 cm may reduce the weight capacity. These specifications apply to a specific variant and mounting method.

Joybuy products for two screens

This selection includes a freestanding stand and dual desk arms for a two-screen setup. The right option for you depends on factors such as available desk space, the adjustments you want and how your screens are mounted.

Floordirekt adjustable stand for 2 monitors, white, 80–108 cm

Floordirekt adjustable stand for 2 monitors, white

A freestanding option if you want to place two monitors on one stand and adjust their width and angle.

Adjustable width: 80–108 cm. MDF; the listed variant is white.

View at Joybuy
Dell Dual Monitor Arm MDA20

Dell Dual Monitor Arm MDA20

A dual desk arm for positioning two screens and adjusting their height and depth.

The product description mentions Dell Quick Release for compatible Dell UltraSharp and P Series monitors, as well as cable management. The desk clamp requires a sufficiently sturdy desktop.

View at Joybuy
Neomounts NM-D775DXSILVER gas-spring arm for 10–32-inch monitors

Neomounts NM-D775DXSILVER

A dual gas-spring arm for anyone who wants to adjust their screen position while working.

Suitable for the 10–32-inch screen size stated in the product name; Topfix mounting and a 180° stop. The product description specifies VESA 75×75 and 100×100 mm, plus height and depth adjustment.

View at Joybuy
iiyama dual desktop arm

iiyama dual desktop arm

A desk arm for two monitors if you want to adjust their height and viewing angle.

The product description specifies VESA 75×75 and 100×100 mm, height adjustment from 200 to 400 mm, tilt, swivel and rotation. The arm attaches to the edge of the desk with a clamp.

View at Joybuy
Neomounts DS60-425BL2 space-saving monitor arm for 17–27 inches

Neomounts DS60-425BL2

A desk arm for two screens. According to the product description, its short upper arm needs little depth when positioned close to a wall or partition.

Suitable for the 17–27-inch screen size stated in the product name. The description specifies VESA 75×75 and 100×100 mm, plus height and depth adjustment. Don’t mount the arm on a fragile, loose or uneven desktop.

View at Joybuy

Frequently asked questions

How should you set up two screens for a dashboard and a report?

Position the screen you work on most directly in front of you, and place the other so you can read it without sitting with your body turned for long periods. The Arboportaal recommends a well-adjustable setup for working from home and notes that screens can also be positioned too high; adjust the height to suit your viewing position.

What should you check when mounting a dual monitor arm?

For each screen, compare its VESA pattern and weight with the specifications for the exact arm. Use the intended clamp or grommet mount, check that the arms and cables can move freely, and follow the installation instructions. Don’t exceed the stated weight limit.

Are monitor arms a legal requirement for employees working from home?

The official guidance consulted doesn’t say that employees must specifically buy a monitor arm. According to the Arboportaal, employers remain responsible for providing good and safe working conditions at home. For more than two hours of screen work a day, the Arboportaal mentions a height-adjustable screen, among other things. Discuss any adjustments you need with your employer.

Is the statutory guarantee in the Netherlands always exactly two years?

No. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands; the expected lifespan depends on the product. A manufacturer’s warranty is in addition to your statutory rights. For distance purchases, you also have a 14-day cooling-off period in many cases.