For a small desk, choose a compact desktop speaker set if two speakers will fit either side of your screen and the connections suit your audio source. Two separate nearfield monitors are an alternative if you want to position them independently and have enough room, the right cables and, if needed, two units. Check the low end from your usual listening position: a stated frequency limit won’t predict how the kick will sound in your room.
Who is this relevant to?
Editor with limited desk space
You want to position two speakers around your screen without losing the stereo image. Start by measuring the available space and checking that both speakers can be angled towards your usual listening position. Genelec recommends a 60° listening angle as a starting point for positioning.
Drum editor checking the low end
You want to assess the balance between the kick and other drum tracks, taking into account what both the monitors and the room let you hear. A stated frequency limit is no substitute for checking from your listening position.
Editor with an existing audio interface
You want to connect the speakers to the outputs of your current audio source and know in advance whether the product includes one monitor or a stereo pair. ADAM Audio lists USB-C and balanced TRS inputs for the D3V; Genelec lists an XLR input for the 8010A.
What should you look for when buying?
Compact desktop speaker set
Choose this if: you have limited space or want to connect via USB-C to a compatible computer. ADAM Audio describes the D3V as a pair with USB-C and analogue TRS inputs.
The trade-off: check that both cabinets will fit symmetrically; the stated frequency limit won’t tell you how the low end will sound on your desk.
Two separate compact nearfield monitors
Choose this if: you want to position the speakers separately but have limited space on each side. Genelec gives the 8010A a width of 121 mm.
The trade-off: the 8010A is sold individually and, according to Genelec, has a lower limit of 67 Hz at −6 dB. Allow for two speakers and for checking the very deepest bass separately.
Two separate 5-inch nearfield monitors
Choose this if: you have more room to position them and want to compare analogue inputs and placement controls. ADAM Audio lists the T5V; Yamaha lists XLR and TRS inputs for the HS5.
The trade-off: this setup needs space for two separate cabinets; Yamaha says the HS5 is sold individually.
| What to consider |
What to check before buying |
Who is this important to? |
| Positioning two speakers so they fit |
Measure the space beside and in front of your screen. Genelec gives the 8010A dimensions as 195 × 121 × 115 mm (H × W × D), including the Iso-Pod. |
With a cramped desk, I want to position two cabinets symmetrically around the screen and angle them towards my listening position. Around 29% of consumers put a suitable, symmetrical placement at the top of their buying priorities. |
| Assessing the low end of drums |
Compare the measurement basis: ADAM Audio lists 45 Hz at −6 dB for the T5V; Yamaha lists 54 Hz at −10 dB and 74 Hz at −3 dB for the HS5. Genelec lists 67 Hz at −6 dB for the 8010A. Assess the low-end balance from your listening position. |
When editing drums, I want to assess the balance between the kick and other tracks, rather than just compare specifications. Around 23% of consumers give checking drum bass and differences between recordings their highest priority. |
| Connecting to your audio source |
Check the outputs on your computer or interface and compare them with the monitors’ inputs. ADAM Audio lists USB-C and TRS for the D3V; Genelec lists XLR for the 8010A, and Yamaha lists XLR and TRS for the HS5. |
With an existing interface, I want to connect the monitors without finding that a connection option is missing or unsuitable. Around 18% of consumers prioritise connecting to their current audio source. |
| Adjusting for the influence of your desk and room |
Check which controls the exact model has. Genelec lists room-compensation switches for the 8010A; Yamaha lists ROOM CONTROL and HIGH TRIM for the HS5. |
If my desk and room affect what I hear, I want to see which settings might help and check the sound from my usual listening position. Around 18% of consumers give adjustment for the influence of their desk and room top priority. |
| Putting together a complete stereo pair |
Check the number of speakers and the cables and stands required for the exact offer. ADAM Audio describes the D3V as a pair; Genelec lists the 8010A and Yamaha the HS5 as sold individually. |
I want to know in advance whether I’ll have two speakers and the parts needed for a usable stereo setup. Around 12% of consumers prioritise a complete stereo pair and the necessary components. |
Common pitfalls
-
Assuming every monitor is supplied as a stereo pair
A single active monitor does not automatically make a complete stereo setup. Yamaha lists the HS5 as sold individually, as does Genelec for the 8010A, while ADAM Audio describes the D3V as a pair.
Before choosing, check the exact offer to see how many speakers and which components are included.
-
Comparing frequency limits without checking the dB reference
The measurement basis varies by model: ADAM Audio lists 45 Hz at −6 dB for the T5V; Yamaha lists 54 Hz at −10 dB and 74 Hz at −3 dB for the HS5. Genelec lists 67 Hz at −6 dB for the 8010A. These figures are not directly comparable on the same measurement basis, and they won’t predict the low-end balance in your room.
Read the dB figure alongside the frequency limit, and check drum recordings from the intended listening position, using another listening reference if needed.
-
Expecting adjustment controls to fix positioning problems
Adjustable controls are no substitute for a workable stereo position. Genelec recommends 60° as a starting point for the listening angle; the final setup needs to suit your desk and listening position.
Plan where both speakers will go first, then check the controls on the exact model from your usual listening position.
Brands to compare
ADAM Audio
The D3V is an active desktop speaker set supplied as a pair; the T5V is a separate 5-inch nearfield monitor for a roomier setup.
- ADAM Audio lists USB-C and analogue TRS inputs, detachable stands and placement controls for the D3V.
- ADAM Audio lists 45 Hz at −6 dB for the T5V. This specification doesn’t determine how the low end will sound on a particular desk.
Genelec
The individually packaged 8010A is a compact active nearfield monitor with an analogue XLR input, designed to be positioned as a single unit.
- Genelec specifies a width of 121 mm, room-compensation switches and a lower limit of 67 Hz at −6 dB for the 8010A.
- The compact cabinet doesn’t remove the need for good stereo positioning; check the very deepest bass from your listening position too.
Yamaha
The HS5 is a separate active 5-inch nearfield monitor with XLR and TRS inputs, for a setup with two individual cabinets.
- Yamaha lists ROOM CONTROL and HIGH TRIM as controls for the HS5.
- Yamaha lists the HS5 as sold individually and gives different frequency limits: 54 Hz at −10 dB and 74 Hz at −3 dB. Check how many speakers you need.
JBL Professional
The 305P MkII is an active 5-inch monitor to compare if you have room for two separately positioned speakers.
- JBL lists balanced XLR and TRS inputs, Boundary EQ and HF Trim.
- JBL describes Boundary EQ as compensating for the effect of the surroundings; this manufacturer’s description doesn’t show how the monitor will respond on your desk.
KRK
The ROKIT 5 Generation Five is a separate active 5-inch option to compare if you want to explore different listening modes.
- KRK lists Mix, Focus and Create modes, along with 25 combinations of boundary and EQ settings.
- The features described by KRK don’t prove that a particular mode will make drum recordings easier to assess accurately in every room.
Products on Joybuy
Related products coming soon.
Frequently asked questions
How should I position two monitors if my desk is small?
Angle both monitors towards your usual listening position and aim for a symmetrical setup. Genelec recommends a 60° listening angle as a starting point; also measure to check that your chosen speakers will actually fit on your desk.
Can I use monitors while the drum microphones are live?
When recording at the same time, microphones can pick up sound from the speakers again. In that case, turn off monitor playback and use headphones if needed. Focusrite’s recording guidance is about vocals, but it describes the same signal path.
Can adjustment controls make up for poor positioning?
No. Genelec describes making adjustments from the intended listening position after the monitors have been placed. Check the setup first, then assess what the settings change from your listening position.
Can I try a pair bought online at home and return it?
For a standard online consumer purchase in the Netherlands, you generally have a statutory cooling-off period of up to 14 days after the product is delivered; exceptions may apply. ACM ConsuWijzer recommends checking the applicable terms.
When is a CE marking relevant for a monitor?
A CE marking is required when the harmonised EU rules for the product category stipulate it. The European Union’s Your Europe website explains when it applies; check which rules cover the exact product.