Who is this choice relevant to?

Editor working with existing drum tracks

You mainly work with supplied files in a quiet room. Choose an interface based on the listening and computer connections you need, rather than the highest possible number of recording inputs. For example, MOTU lists a headphone output with its own volume control for the M4.

Drummer recording multitrack sessions

You want to record several microphones at once onto separate tracks when making a new acoustic drum recording, then edit the results later. Focusrite and Audient describe interfaces with several built-in microphone preamps for this type of recording setup.

Editor using an electronic drum kit

You want to find out first whether your drum module already sends the audio or MIDI you need to your computer. Roland lists multichannel USB audio and MIDI for the V71; this doesn’t automatically apply to other modules.

Which buying criteria matter?

Start with what you need to do now: editing existing recordings calls for different connections from recording with several microphones at once.

What to consider What to look for when buying Who is it for?
Listening connections and capacity Check that you have the headphone and independently controlled speaker outputs you actually need, as well as compatibility with your computer. If I mainly edit existing drum tracks, I want to listen comfortably without paying for recording capacity I won’t use. Around 36% of consumers prioritise suitable listening connections and capacity.
Microphone inputs for new recordings Count the separate microphones you want to record at once, then check how many built-in XLR microphone preamps the exact model has. Only count ADAT expansion if you have compatible equipment and the right settings. If I record acoustic drums myself, I want to capture several microphones at once on separate tracks. Around 29% of consumers prioritise these recording inputs.
Headphone mixes and controls Count the listeners and pairs of speakers, then check whether the headphone outputs can be routed independently. The number of connections alone won’t tell you this. If I’m working with a second listener, I want to choose who hears which mix. Around 21% of consumers consider separate listening routes the most important factor.
Computer and module compatibility Check the exact module model, the USB audio or MIDI function you need, the operating system and any required drivers. If I want to connect an existing drum module, I first want to know which connection works with my computer. Around 14% of consumers prioritise compatibility with their module and computer.

Common buying mistakes

  • Confusing the total number of inputs with microphone preamps

    A stated input count doesn’t automatically mean that every input has a built-in microphone preamp. Focusrite lists eight analogue inputs as well as digital connections for the Scarlett 18i20; the MOTU M4 has four analogue inputs, two of which have microphone preamps.

    First count how many microphones you want to record at once, then check the number of built-in XLR microphone preamps on each model.

    Digital expansion may require separate, compatible preamp or converter equipment.

  • Choosing a large eight-channel model when you only work with existing recordings

    The number of recording inputs doesn’t determine how many existing files you can play or edit at once in your editing software. Extra recording and routing features may go unused if you don’t make new drum recordings.

    Separate your current editing needs from any specific plans to record drums yourself using several microphones.

  • Confusing direct monitoring with software monitoring

    Direct monitoring and software monitoring use different listening routes. If both let you hear the same input signal, you may hear it twice. Focusrite Support recommends turning off software monitoring when using direct monitoring.

    Decide which listening route you need, then set up monitoring for that signal accordingly.

  • Assuming every electronic drum module sends the same USB tracks

    The multichannel USB audio and MIDI features described for the Roland V71 don’t automatically apply to other modules.

    Check your module’s manual for details of its audio outputs, USB audio and MIDI.

Brands worth considering

MOTU

The M4 could suit an editor who needs a headphone output and a computer connection, and records with only a few microphones at once.

  • MOTU lists two microphone preamps and a headphone output with independent volume control for the M4.
  • The two additional line inputs aren’t extra microphone preamps. So the M4 may not be the right choice if you plan to record with four microphones at once in future.

Focusrite

The Scarlett 18i20 4th Gen is designed for those who want to record several microphones at once for multitrack drum sessions.

  • Focusrite lists eight built-in microphone preamps and features such as Auto Gain and Clip Safe.
  • According to Focusrite Support, ADAT expansion requires a connected device, with the sample rate and synchronisation settings matched. Digital expansion doesn’t add another set of built-in analogue microphone inputs.

Audient

The EVO 16 is designed for multi-microphone recording and features Smartgain; the iD48 also offers switchable analogue inserts for use with external equipment.

  • Audient lists eight microphone preamps and two independent headphone outputs for both the EVO 16 and the iD48.
  • Inserts and extra recording inputs may not be useful if you only edit existing files.

Universal Audio

The Volt 876 is a recording option for anyone who wants to use analogue Vintage mode and compression while recording.

  • Universal Audio lists eight preamps and analogue compression on each channel.
  • The recording circuitry won’t change existing files afterwards if it wasn’t used during the recording.

Solid State Logic

The SSL 18 combines eight microphone inputs with two headphone routes and more advanced studio monitor features.

  • SSL lists two independently mixable headphone outputs and switchable Legacy 4K colouration.
  • SSL’s claims about exceptional sound performance aren’t an independent comparison with other models.

Joybuy products for this use

Related products coming soon.

Frequently asked questions

Do you need eight inputs to edit eight existing drum tracks?

No. Existing files play back in your editing software; eight built-in microphone preamps are useful if you also want to record eight microphones at once. For editing, start by choosing suitable listening outputs and checking compatibility with your computer.

Do ADAT inputs immediately give you extra microphone inputs?

No. For the Scarlett 18i20, Focusrite Support describes expansion using a separate ADAT device. The devices must use the same sample rate and be synchronised; the possible number of channels per cable also depends on the sample rate.

Why do I sometimes hear a doubled or delayed signal while recording?

If direct monitoring and software monitoring play the same input signal at the same time, it can sound doubled. When using direct monitoring, Focusrite Support recommends turning off software monitoring for that signal. Direct monitoring doesn’t change how the recording sounds in your software.

Should I turn up my headphones to hear the details in drum tracks?

Not necessarily. VeiligheidNL recommends well-fitting headphones to reduce background noise and the temptation to turn up the volume. This is listening advice, not a legal volume limit or an assessment of any particular interface.