Home worker with poor downstairs coverage
Your connection works by the modem, but video calls or other work keep cutting out downstairs. The Consumentenbond recommends first finding out where the signal gets weaker.
First, test the connection via an Ethernet cable at the modem and compare it with Wi-Fi at your workspace: a new device won’t solve a problem with the internet connection itself. If you can run a cable downstairs, a wired access point or mesh point could work well. Without a cable, your choice depends on the Wi-Fi signal at an intermediate location or on how well powerline works in your home.
Your connection works by the modem, but video calls or other work keep cutting out downstairs. The Consumentenbond recommends first finding out where the signal gets weaker.
You want to add a Wi-Fi point without giving up your small work shelf, so you’re comparing wall or ceiling mounting with a plug-in option.
You want a usable network connection downstairs as well as Wi-Fi. Check how many LAN ports will remain free once the Wi-Fi point is connected to the main network.
Choose this if: you can run an Ethernet cable to your workspace and mainly need better Wi-Fi there.
Consider: running a cable and possibly providing PoE power require extra preparation. Also check the operating mode and available LAN ports.
Choose this if: you can’t run a cable, but there’s still a usable Wi-Fi signal at an intermediate location.
Consider: the extra point needs to maintain a good connection of its own. Placing it behind obstacles or where coverage is worst may not work well.
Choose this if: running a cable isn’t practical and the wireless connection between floors isn’t strong enough.
Consider: performance can vary between sockets. You’ll need adapters at both ends and should test the sockets you plan to use.
Choose this if: you need router features or several LAN connections as well as better coverage.
Consider: a router takes up more room than a wall-mounted point or plug-in repeater. Check its access point mode and your provider’s connection details.
| What to consider | What to check before buying | Who this matters to |
|---|---|---|
| Coverage at your workspace | Test the connection by the modem and at your workspace. Then decide whether you need a wired point or a wireless point in a suitable location. | I want to find out where the signal drops out before choosing a solution; around 36% of consumers prioritise reliable coverage at their workspace. |
| Limited shelf space | Check the mounting method, any parts required, the power supply and the space needed for cables. | I want to keep my small shelf clear and am considering wall mounting or a plug-in option; around 28% of consumers prioritise solutions that take up little shelf space. |
| Wired network connection | Count the free LAN ports once the connection to the modem or other points has been made. | I want to keep an Ethernet port free for my desktop computer after connecting the Wi-Fi point; around 22% of consumers prioritise a wired connection for work equipment. |
| No cable downstairs | Test the sockets you plan to use and check that the kit includes an adapter by the router and a Wi-Fi adapter downstairs. | If I can’t run a cable downstairs, I want to know whether powerline will work in my home; around 14% of consumers prioritise a connection that doesn’t need a network cable. |
A wired test by the modem helps you tell the difference between a problem with the internet connection and one with the Wi-Fi reaching downstairs.
First test the connection via an Ethernet cable by the modem, then test it at your workspace. After that, choose a suitable solution.
The extra point needs to maintain a usable connection to the network itself.
Find an intermediate location with fewer obstacles, then check the result at your workspace.
Devolo warns that some sockets can deliver low transfer speeds and that electrical appliances may cause interference.
Try the adapters in the wall sockets you plan to use before relying on this option.
A device in router mode may need to be connected differently from an access point. The number of available LAN ports can also depend on how it’s connected.
Decide in advance which mode you need, then count how many ports will be left free.
The Deco X50 is a mesh option with optional Ethernet backhaul. According to TP-Link, the Deco X50-PoE can also be mounted on a wall or ceiling.
The compact FRITZ!Repeater 1200 AX plugs into a socket and has one LAN connection.
The RT-AX57 is a standalone Wi-Fi 6 router with access point mode.
The Magic 2 WiFi 6 next Starter Kit is a powerline kit with Wi-Fi, designed for workspaces where running a cable or getting a good wireless connection between floors is difficult.
These products are suited to an extra wired or mesh Wi-Fi point, wall or ceiling mounting, and powerline with Wi-Fi. For the specific radio equipment you’re considering, check that it carries the required CE marking, as advised by the Dutch Authority for Digital Infrastructure.
Image unavailable
A good fit if you want to place an access point away from your work shelf. Check that your set-up provides the PoE power required.
The product name specifies PoE.
Image unavailable
This mesh kit includes two Deco units and suits anyone looking to extend Wi-Fi to several areas. PoE requires a compatible power supply over Ethernet.
The product name specifies dual-band and Wi-Fi 6.
Image unavailable
This mesh kit includes two units and suits anyone looking to add an extra Wi-Fi point. Check that Ethernet backhaul is compatible with your wired set-up.
The product name specifies dual-band and Wi-Fi 6.
Image unavailable
A good fit if you want to mount an access point on a wall or ceiling. Check which power supply suits your set-up.
The single RJ45 port may be needed for the uplink, in which case it won’t also be available for a desktop computer.
Image unavailable
A powerline Wi-Fi kit that extends your network over your home’s electrical wiring. Test the sockets you plan to use, as performance can vary.
The product name specifies a starter kit.
No, not necessarily. First compare a wired test by the modem with the connection at your workspace. If the main problem is weak Wi-Fi downstairs, an extra access point could be an option. The Consumentenbond recommends investigating the cause of the problem first.
Place it somewhere it can still receive a usable signal, with as few obstacles as possible between the points. Then test the connection again at your workspace. Don’t choose a location solely because it’s where coverage is worst.
According to ACM ConsuWijzer, you’re free to choose your own router. You’ll still need the connection settings provided by your internet provider to connect it to the network. Adding an access point behind your existing modem is different from replacing the modem.
Radio equipment sold in the Netherlands must carry the CE marking. The Dutch Authority for Digital Infrastructure states that the RED 3.3 requirements have applied to certain categories of connected radio equipment since 1 August 2025. Check whether the version on offer falls within these categories. The marking doesn’t tell you whether Wi-Fi will work well in your home.