Who is this guide for?

Home worker with weak Wi-Fi downstairs

Your regular workspace downstairs mainly needs better Wi-Fi reception, while the internet connection itself may be working well. Test the connection with an Ethernet cable before choosing equipment; the Consumers' Association recommends measuring your speed over a wired connection.

Home worker who prioritises a stable connection

You may be able to run a cable to your regular workspace or connect an extra access point by cable. This avoids a wireless connection between access points, if the layout and connections in your home allow it.

Tenant who wants to keep their provider's router

You want to extend Wi-Fi downstairs without replacing your existing router. Check whether the extra device can operate in access point mode and where you can place it. If you make any changes, consider whether the installation can be reversed.

What should you consider when choosing?

Start with a wired test and check where your existing router is positioned. Then choose based on the areas that need Wi-Fi, whether you can run a cable and which features you want to keep using on your provider's router.

What to consider What to look for when buying Who is this important for?
Wi-Fi coverage downstairs Measure coverage at your workspace and at possible locations for an extra access point; check how many access points are included in the pack. I mainly want usable Wi-Fi at my downstairs workspace and want to know whether one extra access point will be enough. Around 36% of consumers in this situation prioritise coverage above all else.
Connection stability for work First, test with a computer connected by cable; check whether there is a practical cable route and a spare connection. For a regular workspace, I would rather not rely on the wireless connection between access points if running a cable is an option. Around 29% of consumers prioritise connection stability.
Installation in a rented home Check the location of power sockets and existing cable routes; consider whether any changes can be reversed without major work. I want to add Wi-Fi downstairs without making unnecessary or difficult-to-reverse changes to the property. Around 21% of consumers value a practical, reversible installation most.
Cost, features and maintenance First, try repositioning the router; then check the features available in the chosen mode, how many access points you need and the level of update support. I don't want to buy a device or take on extra management if adjusting my current set-up is enough. Around 14% of consumers say cost and ease of management are their main considerations.

Common buying mistakes

  • Buying a more expensive router without testing the connection first

    Weak Wi-Fi downstairs may point to a different issue from a problem with your internet connection. Without a wired test, you won't know which one needs attention.

    First, measure the connection using a computer connected by Ethernet cable. Then check the router's position and test again downstairs before choosing any equipment.

  • Assuming a two- or three-unit pack will provide coverage everywhere

    The number of access points you need depends on your home and the reception where you plan to place them. The advertised coverage is not a measurement of coverage in your rented home.

    Decide which areas need coverage and check exactly what is included in the pack on offer.

    Extra access points take up space and need to be plugged in somewhere suitable.

  • Expecting a mesh system to take over all your router's functions automatically

    According to TP-Link, when Deco is in access point mode, the main router continues to manage network clients. Some advanced features in the Deco app are then unavailable.

    Before installation, choose between router and access point mode, and check which features you need in that mode.

  • Placing a repeater where reception is already at its weakest

    A wireless access point needs a usable connection to your existing router.

    Test reception where you plan to put the access point. If the wireless signal doesn't travel well through the floor, see whether a wired connection is practical.

Brands to consider

TP-Link

The Deco X50 is a range of expandable Wi-Fi 6 mesh systems, available with one, two or three access points.

  • According to TP-Link, each Deco X50 unit has three Gigabit ports. Deco supports access point mode and Ethernet backhaul.
  • Some advanced features in the Deco app are unavailable in access point mode. The product specifications don't measure coverage at your downstairs workspace.

FRITZ!

The FRITZ!Repeater 1200 AX is an additional access point for extending an existing network.

  • FRITZ! lists a Gigabit LAN port and compatibility with a FRITZ!Box or other routers.
  • The automatic FRITZ! Mesh integration described applies to FRITZ! devices. The repeater does not replace a modem.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router for anyone who also wants to change their router set-up or the number of wired connections.

  • ASUS's Netherlands specifications list router and access point modes, one Gigabit WAN port and four Gigabit LAN ports.
  • ASUS lists separate V1 and V2 specifications. This information doesn't show whether a particular unit will improve reception on a specific downstairs floor.

NETGEAR

The Orbi RBK763S is a Wi-Fi 6 mesh system with a router and two satellites, as described by the Consumers' Association.

  • The Consumers' Association lists three units and four Ethernet ports for this version.
  • A three-unit system may be more equipment than a compact rented home needs for its workspace. The product information given doesn't provide a basis for ranking this model above others.

Joybuy products

This selection includes mesh systems with two devices for extending coverage between areas, as well as an access point for a fixed connection point.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

This two-device mesh system is an option if you want to extend Wi-Fi between two areas of your home.

Configuration: 2-Pack.

Before buying, check the connection options and whether both access points can be positioned suitably in your home.

View at Joybuy
ASUS ZenWiFi BT8 (2-Pack), Tri-Band Wi-Fi 7

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7 (802.11be)

This two-device ZenWiFi mesh system is an option if you want to extend coverage between two areas.

Configuration: 2-Pack, Tri-Band, Wi-Fi 7 (802.11be), 2.4 GHz/5 GHz/6 GHz.

Check that the connections and features suit the devices you want to connect.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

This two-device mesh system is an option for extending Wi-Fi between areas of your home.

Configuration: Wi-Fi 6, 2-Pack.

TP-Link states that some advanced Deco app features are unavailable in access point mode.

View at Joybuy
TP-Link Omada EAP653 Wireless Access Point, 2976 Mbit/s, PoE

TP-Link Omada EAP653 Wireless Access Point (WAP)

An access point to consider for a fixed location where you want to connect an extra access point by cable.

Specifications listed in the product name: 2976 Mbit/s and Power over Ethernet (PoE).

Before buying, check how the access point will connect to your network and how it will be powered.

View at Joybuy
ASUS ZenWiFi BT10 (2-pack), Tri-Band Wi-Fi 7

ASUS ZenWiFi BT10 (2pk) Tri-Band Wi-Fi 7 (802.11be)

This two-device ZenWiFi mesh system is an option if you want to extend Wi-Fi between areas of your home.

Configuration: 2pk, Tri-Band, Wi-Fi 7 (802.11be), 2.4 GHz/5 GHz/6 GHz.

Check that the connection options and features suit your existing network and devices.

View at Joybuy

Frequently asked questions

How can you tell whether the router or the internet connection is the cause?

First, measure the connection using a computer connected by Ethernet cable. If the wired connection is good but Wi-Fi is weak downstairs, look at the router's position and Wi-Fi settings before choosing an extra access point.

Can you connect a mesh system without removing your provider's router?

Yes. TP-Link describes connecting Deco to an existing router in access point mode. The existing router then continues to manage the network functions; check which features your chosen Deco version retains in that mode.

Do you need permission to run a cable in a rented home?

According to the Dutch government, you don't need permission for minor changes that can be reversed without too much cost; filling in small holes is one example. Renovation work does require permission. So check the specific cable route and what work it would involve.

Can you choose your own router in the Netherlands?

According to ACM ConsuWijzer, you have the freedom to choose your router and can usually choose your own modem too. There are conditions for connecting to the network; for example, a provider may refuse an unsafe device. Ask for the connection settings if needed, and keep your device up to date.

Does a router or mesh system you buy always come with exactly two years' warranty?

No. ACM ConsuWijzer distinguishes between a manufacturer's or seller's warranty and your statutory rights. There is no fixed statutory warranty period of exactly two years: factors such as the lifespan you could reasonably expect and normal use are relevant. The seller is your point of contact.