Who is this for?

Home worker who can run a cable

You want a reliable connection at your downstairs workspace and can run an Ethernet cable to it. TP-Link explains how Deco nodes can be connected by cable in access point mode.

Home without a cable route

You want to extend Wi-Fi wirelessly across multiple floors and can try different positions for your mesh nodes. The Consumers’ Association points out that walls and ceilings can interfere with the signal.

User of an existing router

You want to improve a weak spot without replacing your whole network straight away. FRITZ! explains that the Repeater 1200 AX can connect to a FRITZ!Box via LAN and can also be used with routers from other brands.

What should you consider when choosing?

Wired access point or mesh node

Choose this if: you can run an Ethernet cable to your downstairs workspace and want to test the connection there.

Trade-off: running a cable takes effort; an access point such as the Ubiquiti U6+ also needs PoE power.

Wireless mesh system

Choose this if: you don’t have a cable route and want to extend Wi-Fi across multiple floors.

Trade-off: floors and walls weaken the signal. An extra node or a newer Wi-Fi version won’t guarantee a good connection downstairs.

Keep your existing router

Choose this if: your router works well otherwise and only one workspace has poor coverage.

Trade-off: check whether each model is compatible with your router and supports the mesh or access point features you want to use.

What to consider What should you check? Who is this important for?
Reliability at your workspace Compare a speed test over a cable with one at your workspace. Check Ethernet backhaul, ports and the power supply for the node downstairs. If I make lots of video calls downstairs, I mainly want a reliable connection at my desk. Around 36% of consumers prioritise reliability in that location.
Wireless coverage between floors Try placing an intermediate node somewhere it still gets a good signal from the previous one, then test the connection at your workspace. Without a cable route, I want to know whether a wireless connection can reach across the floors. Coverage is the main concern for around 29% of consumers.
Compatibility with your current router Make a note of your router model and check which mesh or access point features it supports, along with the connection method required. I want to keep my router if it works well otherwise and just extend coverage downstairs. Around 21% of consumers prioritise compatibility with their existing router.
Total purchase and running costs Measure and try repositioning equipment first, then compare how many nodes you need and whether extra power supplies or installation are required. I want to avoid buying more equipment than I need. Total purchase and running costs are the main priority for around 14% of consumers.

Common buying mistakes

  • Treating a stated Wi-Fi speed or coverage area as a guarantee

    Your connection downstairs also depends on walls, floors and where you place your router and nodes. The Consumers’ Association explains that obstacles interfere with the signal and that mesh systems can perform differently in tests.

    Test the connection where you plan to work, and check the connection between mesh nodes too—not just the signal next to the router.

  • Choosing a Wi-Fi node without checking backhaul, ports or power

    A wired node needs a suitable network connection. The Ubiquiti U6+ requires PoE power, so you’ll need to make sure it’s compatible with your existing network.

    Map out the route from your modem to your workspace and count the ports and power connections you’ll need before choosing a version.

    Brands to consider

    TP-Link

    Deco mesh systems are an option for extending coverage with multiple nodes and, where the connection allows, Ethernet backhaul.

    • TP-Link explains how to connect Deco nodes using wired backhaul and access point mode.
    • The connection method and features depend on the model you choose; the instructions don’t tell you what coverage you’ll get in a particular home.

    FRITZ!

    A FRITZ!Box with FRITZ!Repeaters is one way to extend your network if you already use FRITZ! equipment.

    • According to FRITZ!, the Repeater 1200 AX can connect to a FRITZ!Box via LAN and can also be used with routers from other brands.
    • Check which mesh features are available with the specific router and repeater you want to use together.

    ASUS

    AiMesh and ZenWiFi offer connection options for compatible ASUS routers, including wired backhaul.

    • ASUS provides instructions for router and access point modes.
    • Check model compatibility, firmware and switch configuration; setup instructions can’t predict the coverage you’ll get in your home.

    NETGEAR

    Orbi 370 is an option if you’re considering a complete multi-node set.

    • NETGEAR lists three nodes and dual-band Wi-Fi 7 for the RBE373 set.
    • The manufacturer’s stated coverage and performance don’t guarantee a connection through the floors of a particular home.

    Ubiquiti

    UniFi access points such as the U6+ are worth considering if you already have a cable running to your workspace.

    • The official specifications list a gigabit uplink and PoE power for the U6+.
    • An access point doesn’t automatically replace all router functions; check that your power supply and existing network are suitable.

Joybuy products

This selection features TP-Link Deco mesh sets with two or three units to extend Wi-Fi coverage around your home. Before buying, check whether the units will connect by cable or wirelessly, and which version is compatible with your connections.

TP-Link Deco BE68 mesh set, 2-pack

TP-Link Deco BE68 (2-pack)

A two-unit mesh set for extending Wi-Fi coverage around your home.

The product information lists tri-band Wi-Fi, wired or wireless backhaul and three WAN/LAN ports per unit.

Before buying, check that the exact version meets the applicable EU requirements, including CE marking.

View at Joybuy
TP-Link Deco X20 mesh set, 2-pack

TP-Link Deco X20 (2-pack)

A two-piece mesh set for extending Wi-Fi coverage to multiple areas; the product information lists the Deco X20 as the model.

The description lists Wi-Fi 6 and Ethernet backhaul.

Before buying, check that the exact version meets the applicable EU requirements, including CE marking.

View at Joybuy
TP-Link Deco X50 mesh set, 3-pack

TP-Link Deco X50 (3-pack)

A three-unit mesh set for Wi-Fi coverage around your home.

The product information lists dual-band Wi-Fi 6 (2,4 GHz/5 GHz) and three gigabit Ethernet ports per unit.

Before buying, check that the exact version meets the applicable EU requirements, including CE marking.

View at Joybuy
TP-Link Deco XE75 Pro mesh set, 3-pack

TP-Link Deco XE75 Pro (3-pack)

A three-unit mesh set for extending Wi-Fi coverage to multiple areas.

The product information lists tri-band Wi-Fi 6E (2,4 GHz/5 GHz/6 GHz) and Ethernet ports per unit.

Hardware versions can differ, so check the full version and port layout before buying. Also check that the exact version meets the applicable EU requirements, including CE marking.

View at Joybuy
TP-Link Deco X50-PoE mesh set, 3-pack

TP-Link Deco X50-PoE (3-pack)

A three-unit mesh set for Wi-Fi coverage around your home.

The product information lists dual-band Wi-Fi 6, PoE and two Ethernet ports per unit.

Check that your network can provide the required PoE power and that the exact version meets the applicable EU requirements, including CE marking.

View at Joybuy

Frequently asked questions

Should I buy a faster router if video calls keep dropping downstairs?

Not straight away. First, test your internet connection using a computer connected by cable, then compare it with Wi-Fi at your workspace. You could also try moving the router to see whether the issue is with your internet connection or the Wi-Fi in your home.

How do I connect a Deco node by cable if I’m keeping my current modem-router?

TP-Link explains that a satellite Deco can be connected by cable to the main modem or router when set to access point mode. Check the mode you’ve selected and make sure wired backhaul works with your set and connection.

What should I consider when positioning my router and mesh nodes?

Test the connection at your workspace and between the nodes. If possible, don’t put the router in a utility cupboard. Keep the software up to date, and remember that extra equipment uses power continuously.

Does a two-year manufacturer’s warranty cover all my rights?

No. According to ACM ConsuWijzer, statutory consumer rights also apply for as long as the product should last under normal use, based on what you could reasonably expect. There is no single fixed statutory period for all products. If a product is faulty, contact the retailer.

Can I use my own router in the Netherlands, and is home Wi-Fi licence-exempt?

According to ACM ConsuWijzer, you can choose your own modem or router as long as the equipment meets the applicable requirements. The Dutch Authority for Digital Infrastructure states that home Wi-Fi is licence-exempt when you follow the designated frequencies and conditions of use. Radio equipment sold in Europe must also meet the applicable conformity requirements, including CE marking.