Who is this advice for?

Home worker with weak Wi-Fi downstairs

Your workspace is on a different floor. So, check not only the coverage around the main router, but also the connection at your workspace and between the mesh nodes. Consumentenbond and TP-Link highlight coverage and wired connections as important considerations when extending Wi-Fi.

Household with simultaneous video calls

If several people are on video calls at the same time, consider both your Wi-Fi and the internet upload capacity available. Zoom publishes bandwidth requirements for different types of call; these don’t guarantee how a mesh kit will perform in your home.

Homeowner with an existing Ethernet cable

You can connect a mesh node downstairs using a cable and want to know whether its ports and connection mode are suitable. TP-Link outlines different connection rules for Deco in router and access point modes.

What should you look for when choosing?

First, check where the connection is falling short: at your workspace, between the mesh nodes or in your internet upload capacity. Then see whether a wired connection is possible and which connection mode suits your existing router.

What to consider What should you check? Who is this important for?
Connection at your downstairs workspace Test the Wi-Fi where you work and check whether a mesh node can still receive a usable connection there. I want to work downstairs without relying on a strong signal only next to the main router. Around 36% of consumers put coverage at their workspace first.
Video calls at the same time Test upload speed and call quality while both calls are in progress; Wi-Fi can’t make up for limited internet upload capacity. If people at home are on calls at the same time, I want to know whether the internet connection can handle the load. Around 29% of consumers prioritise simultaneous video calls.
Connection between mesh nodes Check whether Ethernet backhaul is possible. Without a cable, the placement of the nodes and their wireless connection are important. I want to find out whether I need a cable between floors or whether a wireless connection will work. Around 21% of consumers focus mainly on the backhaul between nodes.
Connection to your existing network Check for access point mode, the number of nodes and which ports will remain available after connecting the backhaul. If I want to keep my existing router, I’m looking for a suitable connection mode and want to avoid unnecessary extra equipment. Around 14% of consumers make this their top priority.

For a 720p group call, Zoom specifies an upload speed of 2.6 Mbps and a download speed of 1.8 Mbps per participating device. These are requirements for the app, not a prediction of the speed at your workspace.

Common buying mistakes

  • Assuming the combined Wi-Fi speed is the speed available for one video call

    Combined theoretical band speeds don’t tell you how much internet upload capacity is available or how well the connection between mesh nodes performs.

    Test the connection at your workspace while both calls are in progress, then compare the result with the requirements of your calling service.

  • Assuming every add-on node can be connected by cable

    According to eero, the eero 6+ router has two Ethernet ports, while the eero 6+ Extender has none. So, they’re not interchangeable if you need a wired connection.

    Check the exact version and how many ports will remain available once you’ve connected the backhaul.

    For the wired setup you want, you may need a different mesh node or a switch.

  • Not checking port or speed details for the exact version

    TP-Link lists 2.5Gbps wired performance for the Deco XE75 Pro, while Joybuy’s product description mentions three Gigabit Ethernet ports per unit. The information provided therefore differs.

    Confirm the port configuration for the exact version before using it as a selection criterion.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 range; according to TP-Link, the Deco XE75 Pro adds a 6GHz band. The features below apply to these specific models, not every Deco version.

  • The Deco X50 has three gigabit ports per node and supports optional Ethernet backhaul.
  • Tweakers notes that the Deco XE75 Pro can use all bands for backhaul; when the network is busy, this can also affect devices connected to satellite nodes. With the XE75 Pro, also check the port details for the exact version.

ASUS

According to ASUS Netherlands, the ZenWiFi BD4 is a dual-band Wi-Fi 7 range with access point mode and two 2.5Gbps WAN/LAN ports.

  • Access point mode and the ports may be useful if you’re using an existing router or a suitable wired connection.
  • Dual-band means there’s no separate third radio band for wireless backhaul. Check the speed and version of the specific model.

NETGEAR

The official product specifications for the Orbi RBK763S list a router with two satellites and a separate wireless backhaul.

  • A separate backhaul is a model feature worth considering if cabling isn’t possible.
  • That feature alone doesn’t guarantee usable coverage at a downstairs workspace; placement and the layout of your home still matter.

eero

With eero 6+, the router and Extender have different connection options.

  • According to eero, compatible routers can be connected using Ethernet backhaul.
  • The eero 6+ Extender has no Ethernet ports, so it isn’t the same as a node you want to use to connect a work computer by cable.

Joybuy products

This selection includes mesh kits for extending coverage to a downstairs workspace, including a kit that lists optional Ethernet backhaul and tri-band kits. Check the connection options and how the mesh nodes connect to each other for the version you choose.

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

A 2-pack for extending a mesh network across multiple nodes; the listed bands are 2.4, 5 and 6 GHz.

Wi-Fi 7 (802.11be).

View at Joybuy
ASUS ZenWiFi BT10, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7

This 2-pack is a mesh option for using multiple nodes around your home; the listed bands are 2.4, 5 and 6 GHz.

Wi-Fi 7 (802.11be). The product information says it can be expanded with compatible ASUS AiMesh nodes.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

A 3-pack for extending coverage with multiple mesh nodes; the product title lists tri-band with 2.4, 5 and 6 GHz.

Wi-Fi 6E (802.11ax). Tweakers notes that the backhaul can use all bands, which can also affect devices connected to satellite nodes when the network is busy.

View at Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

The kit lists optional Ethernet backhaul, which is worth considering if you can connect the mesh nodes by cable.

Dual-band with 2.4 and 5 GHz; Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

How can I tell whether mesh Wi-Fi will help with my video calls?

Compare the connection next to the main router with the one at your downstairs workspace, and test while both calls are in progress. If the main issue is limited internet upload capacity, mesh won’t solve it. Zoom gives bandwidth requirements for different types of call, not a guaranteed speed for your home.

How do I connect Deco nodes by cable if I’m keeping my provider’s router?

Check whether you’re using your Deco in access point mode. TP-Link explains that, in this mode, satellites can be connected by cable to a Deco node or the main router; in router mode, the connection must go through the LAN side of the main Deco. Follow the instructions for the mode you’ve chosen.

Is a tri-band mesh kit always better for a downstairs workspace?

No. The number of bands alone doesn’t determine whether you’ll get a good connection at your workspace. If cabling isn’t possible, check the wireless connection between the nodes and test their placement; an extra band doesn’t guarantee a stable signal through a floor.

What rules apply to mesh Wi-Fi sold in the Netherlands?

Radio equipment sold in the Netherlands must meet the applicable European requirements, including the Radio Equipment Directive; compliant equipment must carry the required CE marking. According to the Dutch Authority for Digital Infrastructure, applicable cybersecurity requirements have also applied since 1 August 2025. A model name or general product description doesn’t prove that every version on sale meets these requirements.