What should you consider when buying?
First, work out how the connection between your router and workspace can be made. Ethernet, a wireless connection between Wi-Fi points and powerline all have different requirements when it comes to placement.
Wired access point or mesh node
Choose this if: you can run an Ethernet cable downstairs and your existing router otherwise meets your needs.
Bear in mind: you’ll need to run a cable; the Ubiquiti U6+ also requires PoE power and suitable network management.
Wireless mesh extension
Choose this if: running a cable isn’t practical and there’s a place where the additional node can still connect to the previous one.
Bear in mind: the nodes communicate over Wi-Fi, so performance depends in part on their placement and any obstacles between them.
Wi-Fi via powerline
Choose this if: you can’t run an Ethernet cable and there’s no suitable place for a wireless node between the router and your workspace.
Bear in mind: the connection travels through your electrical wiring; the choice of socket and electrical appliances can affect data transfer.
A new standalone router
Choose this if: your current router no longer meets your needs and moving it could improve the connection to your downstairs workspace.
Bear in mind: a new router in the same unsuitable spot may not improve the signal through floors or walls.
| Buying consideration |
What to look for |
Who should pay particular attention? |
| Connection downstairs |
Test your internet speed over a wired connection, then assess Wi-Fi in your workspace and where an extra node could go. |
If I work downstairs and the signal is weak there, I want to know whether an extra node in between can still stay connected. Around 36% of consumers prioritise coverage downstairs. |
| Using several devices at once |
Where available, check independent tests under simultaneous load; see whether wired devices can be connected using Ethernet. |
When several people use laptops or phones at the same time, I want the connection to remain usable in the workspace. Around 29% of consumers pay particular attention to simultaneous use. |
| Connecting to your existing network |
Check for access point mode, Ethernet backhaul, the available ports and any features that may no longer be available. |
If I want to keep my existing router, the extension needs to work with it and suit the way my network is managed. Around 21% of consumers prioritise keeping their existing equipment. |
| Installation and maintenance |
Check the power supply, any accessories required, the update policy and the CE marking on the version being sold. |
If you want to understand the full installation, consider the power supply, any extra components and how to update the devices. Around 14% of consumers prioritise installation and maintenance. The Dutch Authority for Digital Infrastructure states that equipment meeting the relevant European requirements carries a CE marking. |
Joybuy products for a connection downstairs
These products are designed to provide Wi-Fi downstairs via powerline, a wired access point or a mesh extension. Before you buy, check what cabling, power supply and ports your setup requires.
No image available
TP-LINK TL-WPA7517 KIT powerline adapter starter kit
A powerline Wi-Fi extension for setups where running an Ethernet cable downstairs is difficult; it uses your existing electrical wiring.
The product description mentions Wi-Fi, a LAN port and a maximum data transfer rate of 1000 Mbit/s; this isn’t the speed measured in your workspace. The choice of socket and electrical appliances can affect data transfer.
View at Joybuy
No image available
TP-Link Omada EAP653 Wi-Fi 6 access point
A wired access point for anyone who can run an Ethernet connection to their workspace.
The product information lists PoE power, MU-MIMO and wall or ceiling mounting. Check that your setup has a suitable PoE power source.
View at Joybuy
No image available
TP-Link Deco X50-PoE mesh Wi-Fi system, 2-pack
A set of two mesh units for extending Wi-Fi to several areas, with PoE available as part of your setup.
The product information lists Wi-Fi 6, PoE support and two Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 mesh Wi-Fi 6E system, 3-pack
A tri-band mesh set with three units for Wi-Fi in several areas; check that its features and ports suit your network.
The product information lists Wi-Fi 6E, QoS and three Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco X50 mesh Wi-Fi system, 2-pack
A Wi-Fi 6 mesh set with two units for wireless coverage extension; the product information also lists optional Ethernet backhaul if you can run a cable between the nodes.
According to TP-Link, the Deco X50 has three gigabit ports per unit. Performance downstairs depends on the connection between the nodes and where they’re placed.
View at Joybuy
Frequently asked questions
Do I need to replace my existing modem or router?
Not if the main issue is poor coverage downstairs: first test your internet connection over a cable, then look into adding an access point or Wi-Fi point. ACM ConsuWijzer explains that you have the freedom to choose your router in the Netherlands, but there are exceptions. Check whether your connection allows you to use your own router, and ask your provider which settings you’ll need.
Where should I put an extra wireless Wi-Fi point?
Place it somewhere it can still get a usable connection to the previous point, rather than automatically putting it where the signal already drops out. The Consumers’ Association recommends keeping obstacles between the points to a minimum; then check the connection in your workspace.
What maintenance do I need to do after installation?
Keep your router and Wi-Fi points up to date, and use a strong password. Before buying, check how updates are made available for the model you’ve chosen.
Does a two-year manufacturer’s warranty cover all my warranty rights?
No. According to ACM ConsuWijzer, you have statutory rights in addition to any manufacturer’s warranty. With normal use, a product must meet the standard you could reasonably expect. If it doesn’t, contact the seller for an appropriate solution.
Do I need a licence for Wi-Fi at home or in this workspace?
According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used in the Netherlands without a licence, notification or registration, both privately and for business. Wireless equipment sold here must meet the relevant European requirements and carry a CE marking. Check the marking on the version you’re actually planning to buy.