Who is this relevant to?

Makers demonstrating small components

You want to show PCB details while keeping both hands free, so focusing distance and the space beneath the camera matter. INSWAN states that the INS-2 has autofocus from 10 cm and a working area of 420 × 315 mm.

Makers livestreaming their work

You move components during a stream, so compare the video mode and how it connects to your computer software, not just the megapixel count. IPEVO lists a UVC interface for the V4K and names OBS as compatible software.

Makers with a screen beside the workbench

You want to connect a separate screen, so you’ll need a model with the right output. ELMO lists HDMI and USB output for the MX-P3; Epson describes direct connection of the ELPDC07 to compatible Epson projectors.

What should you look for?

Start with the distance and working space around your PCB. Then compare the video modes and connections with your computer, software and any screen you plan to use.

Consideration What should you check? Who is this most relevant to?
Small components and working space Check the focusing distance, arm clearance and view of a PCB at your working height. INSWAN lists a working area of 420 × 315 mm and autofocus from 10 cm for the INS-2. If I want to show details while working with my hands beneath the camera, I’ll consider both focusing and clearance. Around 36% of consumers prioritise detail and working space.
Livestreaming tasks in motion Compare resolution and fps for the same video mode. INSWAN lists up to 15 fps at 3840 × 3104 and up to 30 fps at 3840 × 2160 for the INS-2; IPEVO lists up to 30 fps at Full HD for the V4K. During a livestream, I want viewers to be able to follow hand movements, so the video mode I choose matters. Around 29% of consumers prioritise smooth live video.
Connecting to your setup Check the ports on the camera, computer and screen. ELMO lists HDMI and USB for the MX-P3; INSWAN says an adapter is needed to use the INS-2’s USB-A connection with USB-C. If I want to use the camera with my computer, software or a separate screen, I’ll want to know in advance which connection I need. Around 21% of consumers prioritise compatibility with their own setup.
Focusing and operation Check whether you need manual or automatic focus when working at different distances. HUE lists manual focus for the HD Pro; INSWAN lists single and continuous autofocus for the INS-2. When demonstrating different subjects, I want to adjust the focus without unnecessary interruptions. Around 14% of consumers prioritise ease of use.

Common mistakes when choosing

  • Comparing only the highest resolution

    The maximum frame rates listed for the INSWAN INS-2 vary by resolution; the highest resolution and highest fps are not necessarily available at the same time.

    Compare resolution and fps as a single video mode for the livestream you want to create.

  • Assuming digital zoom adds optical detail

    A stated digital zoom factor alone doesn’t show that a small solder joint will be clearly visible.

    Check the focusing distance and assess a sample image at the working height you plan to use.

  • Assuming USB will also connect directly to a screen

    A USB connection for computer software doesn’t automatically replace an HDMI output for a separate screen. ELMO lists HDMI and USB for the MX-P3; INSWAN lists USB-A for the INS-2.

    Before buying, work out how the camera will connect to your computer, recording software and any screen you plan to use.

Brands to consider

IPEVO

The V4K is a USB document camera designed for use with a computer. IPEVO specifies a UVC interface and a capture area of 342 × 255 mm.

  • According to IPEVO, the V4K has an 8 MP sensor and a maximum output resolution of 3264 × 2448; up to 30 fps is available at Full HD.
  • Don’t assume you’ll get 30 fps at the maximum resolution. Also check that the smallest component appears clearly at your intended working distance.

INSWAN

According to INSWAN, the INS-2 combines an adjustable arm, USB-A and autofocus for demonstrations where the distance to the subject varies.

  • INSWAN lists autofocus from 10 cm and a working area of 420 × 315 mm. The manufacturer specifies separate resolution and fps modes.
  • You may need an adapter if your computer only has USB-C. The stated focusing distance doesn’t guarantee that your smallest solder joint will be clearly visible.

HUE

The HD Pro is a flexible USB camera for a fixed angle, with manually adjusted focus.

  • HUE lists 1080p, manual focus and built-in LEDs.
  • If the distance to your subject changes, you may need to refocus. The listed features don’t prove that the smallest components will be clearly visible in your setup.

ELMO

The MX-P3 is worth considering if you need a direct HDMI output as well as USB.

  • ELMO lists 4K output via HDMI and USB, one-touch autofocus and 16× digital zoom.
  • Digital zoom alone doesn’t prove that details on a very small PCB component will be clearly visible.

Epson

Epson describes the ELPDC07 as a USB visualiser with adjustable height and a rotating camera head.

  • Epson lists Full HD 1080p at 30 fps, one-touch autofocus and a microscope attachment.
  • The product information specifies direct connection to compatible Epson projectors. Check that your projector supports the connection.

Joybuy product for streaming your workbench

This selection focuses on showing a work surface during a stream. The Insta360 Link 2C is a webcam with a listed DeskView mode; check that this view suits the camera angle you need for PCB work.

Insta360 Link 2C Standard Bundle webcam in Graphite Black

Insta360 Link 2C Standard Bundle Graphite Black

The product information lists DeskView and streaming compatibility for showing a work surface; check that the view suits your setup.

Listed features: 4K webcam, 1/2-inch sensor, PC/Mac, Auto-Framing and HDR.

Before buying, check that the version of the product on offer carries the required CE marking.

View at Joybuy

Frequently asked questions

Can I use the camera with OBS or other computer software?

It depends on the model and your computer setup. IPEVO lists UVC output for the V4K and names OBS as compatible software. Check that your computer recognises the camera, then select the correct device in your recording software.

How should I position the camera for a PCB?

Place the PCB within the specified working area and check that there’s enough room for your hands beneath the arm. The HUE HD Pro has manual focus; INSWAN lists single or continuous autofocus for the INS-2. Test the intended distance with a component of the size you want to show.

Does a document camera need a CE marking in the Netherlands?

The Dutch government states that electronic devices placed on the EU market must carry a CE marking. Check the marking on the actual version of the product being offered; a model listing or a manufacturer’s claim about testing doesn’t, on its own, confirm that the product on offer carries the marking.

Will I need an adapter for USB-C?

That depends on the connection on your chosen model and your computer. For the INS-2’s USB-A connection, INSWAN advises USB-C users to have a USB-C-to-USB-A adapter ready.

Who should I contact if my camera is faulty?

For a consumer purchase in the Netherlands, the seller is responsible for providing a solution if the product is faulty. The Dutch government states that statutory consumer rights don’t have a fixed time limit; what you can expect from a product depends, among other things, on the product and the information provided by the seller.