Who is a large-format printer suitable for?

Teacher creating large boards on site

If you want to adapt designs in the classroom and print them in large format, it’s worth considering the input options for your preferred paper size, as well as the space available. Canon, Epson and HP describe models with roll and/or sheet feeding.

Manager of a small classroom

As well as the printer itself, you’ll need to make room for handling paper and collecting prints. Arboportaal highlights adequate ventilation as a consideration in the workplace.

Buyer for occasional projects

If you only need large boards now and then, you can weigh up the cost of your own printer, media and ink against outsourcing. Plotgemak.nl offers A1 prints, among other options. Your choice will depend partly on the required size and number of prints.

What should you consider when choosing?

A printer with roll and sheet feeding

Suitable if: you regularly create boards in different sizes and want the option of using both paper rolls and individual sheets.

Consider: check the maximum size for individual sheets; it isn’t automatically determined by the roll width.

A 24-inch printer with a paper roll

Suitable if: a roll is right for your large boards and you also use smaller individual sheets.

Consider: Epson specifies individual sheets up to A3 for the SC-T2100, even though the model supports a 24-inch roll.

Using a print service

Suitable if: you only need boards occasionally or don’t have a suitable place for the printer, paper and printing work.

Consider: the printing takes place outside the classroom, so compare quotes based on the same print requirements.

Consideration What to check Who it matters most to
Board size and paper feed Compare your preferred size and material with the separate specifications for roll and sheet feeding. Epson specifies a 24-inch roll and individual sheets up to A3 for the SC-T2100. If I want to make boards in different sizes, the selected feed option needs to work with my chosen paper. Around 37% of consumers prioritise size and feed options.
Positioning in the classroom Measure the space and allow room for handling paper and collecting prints. Canon gives the TC-21’s dimensions as 968 × 533 × 245 mm; these measurements cover the printer casing only. If I want to use a printer in a small classroom, I also need space to handle paper and collect prints. Around 27% of consumers prioritise where the printer will go.
Running costs or outsourcing Compare the same paper sizes, paper types and quantities, and include paper, ink and any servicing. Without this information, it’s not possible to establish when one option becomes more cost-effective than the other. If I only need boards occasionally, I want to weigh up the supplies for my own printer against using a print service. Around 18% of consumers prioritise ongoing costs.
Workflow and printing process Check which input options, file types and connections suit your specific model and way of working. HP lists roll and sheet feeding and an automatic horizontal cutter for the 2025 edition of the DesignJet T250. If I want to fit regular printing into my teaching work, the input options and controls need to suit my workflow. Around 18% of consumers prioritise the printing process.

How to avoid common buying mistakes

  • Assuming the maximum print width is the maximum sheet size

    Paper rolls and individual sheets can have different maximum sizes. Epson specifies a 24-inch roll for the SC-T2100, but individual sheets only up to A3.

    Check the specifications for the feed method you actually want to use and compare them with the dimensions of your board.

    Choosing the wrong paper type or size could mean extra paper and more work with the roll.

  • Measuring only the printer’s dimensions

    The casing dimensions don’t show how much room you’ll need to feed paper, collect prints and operate the device.

    Measure the entire area you plan to use, allowing for your chosen media and the space needed during printing. In a workplace, also ensure there is adequate ventilation.

    Make sure you have a practical place for the paper and for collecting large prints.

  • Considering the purchase price in isolation

    Your own printer also requires suitable media and ink. A Dutch print service also offers A1 prints.

    Only compare printing in-house with outsourcing once the sizes, paper types, number of prints and quotes are comparable.

    Factor in paper, replacement ink and any servicing.

  • Assuming any replacement cartridge will work

    HP warns that dynamic security may block cartridges with a non-HP chip in the 2025 edition of the DesignJet T250.

    Before you buy, check which cartridges are compatible with the exact printer version.

Relevant brands and models to consider

Canon

Canon describes the 24-inch imagePROGRAF TC-21 desktop model as suitable for posters and schools, among other uses.

  • Canon lists roll and sheet feeding, four pigment inks and casing dimensions of 968 × 533 × 245 mm.
  • The casing dimensions don’t show the full amount of workspace needed. Also check whether the printer supports your preferred individual board size.

Epson

Epson describes the SureColor SC-T2100 as a 24-inch model for technical prints and posters.

  • Epson lists a 24-inch paper roll and individual sheets up to A3.
  • Epson describes nozzle verification; this isn’t independent evidence that it reduces downtime in a classroom.

HP

The 2025 edition of the DesignJet T250 is a 24-inch/A1 model with roll and sheet feeding.

  • HP lists an automatic horizontal cutter.
  • HP warns that dynamic security can restrict the use of cartridges. Check which ink is suitable for the exact version, and don’t assume the speed for a technical drawing will be the same as the time taken to print a full-colour poster.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is a 24-inch printer automatically suitable for my individual display board?

No. Check the maximum sizes for roll and sheet feeding separately. Epson specifies a 24-inch roll for the SC-T2100, but individual sheets only up to A3. Compare your board’s dimensions with the specifications for the model you’re considering.

What should I check when positioning a printer in the classroom?

Measure the space for the printer and leave room for handling paper and collecting prints. Arboportaal highlights the need for adequate ventilation in the workplace, so also assess the ventilation in your planned set-up.

How do I compare the costs and servicing for a school printer?

Compare the printer, suitable media, ink and any servicing based on the same size and expected number of prints. Ondernemersplein states that consumers’ statutory 14-day cancellation period doesn’t apply to business purchases. Check the contractual terms for your business order.

Does a CE mark prove that any printer is safe for my classroom?

No. RVO describes the CE mark as a conformity marking, not a safety certification. The rules that apply depend on the type of device. You should also assess where the printer will go and the ventilation in the classroom.