Who is this guide for?

Moving house with boxes of 35mm film

You want to select lots of images and be able to find them digitally before you pack. The time needed to feed the film through manually and manage the files will determine whether scanning it yourself is practical.

Keeper of treasured originals

You prioritise detail, careful handling and continued access to both the originals and digital files when digitising selected colour negatives.

Owner of mixed film formats

You need to check first whether your collection includes 35mm, 110, 126 or medium format, as the holder required varies by device.

What should you look for when choosing?

When digitising colour negatives before a move, your choice mainly depends on the time available, the level of detail you want, the film formats you have and the overall effort involved in scanning yourself or outsourcing the job.

Standalone scanner with screen

Suitable if: you mainly want to select 35mm negatives and save files without using a computer for scanning. The reflecta x33-Scan saves JPEG files to an SD card.

Bear in mind: you will still need to feed the film through and check the results manually. The reflecta x33-Scan requires a separate adapter set for 110 and 126 film.

Dedicated 35mm film scanner

Suitable if: you want to scan important 35mm negatives in greater detail and dust and scratch detection matters to you. Plustek lists an infrared channel and included scanning software for the OpticFilm 8200i SE.

Bear in mind: this option requires a computer, suitable software and time for feeding the film through and editing the scans. Listed features are not an independent measure of the quality of your scans.

Flatbed scanner with transparency unit

Suitable if: you also want to digitise prints or need a suitable holder for other formats. Epson lists support for 35mm film strips and 120/220 medium format for the Perfection V600 Photo.

Bear in mind: check that the holder, connection and software will work with the specific unit. Epson lists this model as discontinued in the Netherlands.

Outsource digitisation

Suitable if: you have lots of images or little time during the move to clean, correct and organise the files yourself.

Bear in mind: you will be handing over your originals temporarily. Discuss in advance which formats can be processed, how the originals will be handled and which files and corrections you will receive.

Point to consider What to look for when buying Who would prioritise this?
Processing a large batch in time Check how strips are fed through, whether a computer is needed and where files are saved. A trial run with a small selection will help you factor in feeding the film through and checking the results, too. If I want to process a large batch before the move, I need to consider the time spent selecting images and managing files, not just scanning them. Around 36% of consumers prioritise processing time.
Preserving detail and originals Check whether resolution figures are optical or interpolated, and find out which software and output formats are needed. Handle the originals carefully. If you want to digitise treasured negatives carefully, you may value detail and gentle handling more than speed. Around 29% of consumers say preservation and detail are their main concern.
Suitable film holders Sort a small sample by format and check which holders are included or need to be bought separately for the exact model. If my collection includes formats other than 35mm, the holder needs to fit the film. Around 21% of consumers prioritise format compatibility.
Overall effort and cost For the number of images you have, compare the time and equipment required, along with the cost of any missing parts, against a specific quote for outsourcing. If you are weighing up scanning the images yourself against outsourcing, you will want to understand the overall effort involved for your own collection. Around 14% of consumers prioritise total cost.

Common pitfalls

  • Confusing scan time with the time needed to process a whole moving box

    A short scanning time does not automatically include feeding the film through, selecting images, making corrections and organising all the files.

    Start with a small, representative selection and allow for every step before deciding how much to scan yourself.

  • Mistaking interpolation for extra captured image detail

    For the Kodak Slide N Scan reviewed, the manufacturer lists a 14 MP sensor and a 22 MP output mode achieved through interpolation. These figures do not describe the same thing.

    Check whether a resolution figure refers to the sensor or to interpolation and, if possible, assess a trial scan for the way you plan to use it.

  • Buying a scanner before checking your film formats

    A 35mm scanner will not necessarily work with 110, 126 or medium-format film. reflecta offers a separate adapter set for 110 and 126 film for the reflecta x33-Scan; the Kodak version reviewed lists adapters for 135, 110 and 126.

    First sort a representative selection, then compare the holders included with the exact version against the formats you have.

  • Choosing an older flatbed without checking the scanning workflow

    Epson lists the Perfection V600 Photo as discontinued in the Netherlands. Software compatibility may also be an issue with older flatbed scanners.

    For the specific unit, check that all the film holders are included and that the connection and software work with the computer you plan to use.

Brands and relevant product ranges

These product ranges show different ways to scan film. Check the version, accessories and software for each specific listing.

reflecta

The x33-Scan is a standalone option for 35mm strips and slides if you want to select and save images without a computer while moving house.

  • According to reflecta, the x33-Scan saves JPEG files to an SD card. A separate adapter set is available for 110 and 126 film.
  • The scanning time quoted by reflecta refers to a single scan, not processing an entire collection or an independent assessment of image quality.

Plustek

The OpticFilm 8200i SE is a dedicated option for 35mm negatives if scanning settings and correction matter more to you than standalone use.

  • According to Plustek, the OpticFilm 8200i SE has an infrared channel for detecting dust and scratches, and scanning software is included.
  • These features do not prove that damaged images will be restored automatically or that every scan will produce the same quality. Also check the software compatibility of the version on offer.

Epson

The Perfection V600 Photo is an example of a flatbed option for anyone with compatible medium-format film and other materials to scan, as well as 35mm film.

  • Epson lists film holders, JPEG and TIFF output, and DIGITAL ICE for this model.
  • Epson Netherlands marks the V600 as discontinued. If you find old stock or a second-hand model, check that all the holders are included and that the software is usable.

Kodak Photo Plus

The Slide N Scan reviewed, with its 5-inch screen, offers a standalone option for colour negatives in 135, 110 and 126 formats.

  • According to the manufacturer, this version includes format adapters, SD storage and a 14MP sensor.
  • The stated 22 MP output is also achieved through interpolation. The specifications for this version do not confirm which features are included with any listing in the Netherlands.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I avoid damaging negatives while scanning and moving house?

Touch the image surface as little as possible and handle the film carefully; the Library of Congress advises using clean hands or clean, suitable gloves. Keep the originals after digitising them, too. If the film is visibly damaged, consider having it assessed rather than guessing at a cleaning method yourself.

Is an SD card enough to archive my scans?

No. Keep separate backup copies of the files as well as the original negatives. The US National Archives recommends keeping three copies on two different types of media, with one copy stored elsewhere. Give your digital files descriptive names so you can find them again later.

Who can help me in the Netherlands if a scanner I bought breaks down too soon?

According to ACM ConsuWijzer, the seller is responsible if a product, when used normally, does not meet what you could reasonably expect. There is no general fixed warranty period in the Netherlands; a manufacturer’s warranty does not replace your statutory rights.

Where can I dispose of an old electrical scanner in the Netherlands?

According to the Dutch government, as a private customer you can return an old, similar appliance to the retailer free of charge when buying a new one, including online. A municipal collection point is another option; the return process varies by municipality.