Who is a soldering microscope for?

SMD hobbyist with limited workspace

You want a clear view of small connections while still being able to move the circuit board or use tools beneath the lens. So pay attention to the working distance and the clearance under the stand; Dino-Lite lists the working distance for the AM4115TL at each magnification.

Repairer working with reflective solder joints

You want to adjust the lighting angle to see details without reflections overpowering the image. TOMLOV describes the DM9B as having adjustable LEDs and two movable lights; assess how these work in your own workspace.

Maker who records inspections

You want to view the live image on a screen you already own or save images so you can compare connections later. According to the manufacturer, the Andonstar AD407 has a built-in screen and HDMI output, while the Dino-Lite AM4115TL uses USB and has no built-in screen.

What should you look for when choosing one?

What to consider What should you look for? Who is this important for?
Workspace and a stable setup Check the working distance at the magnification you use and how much clearance there is under the stand for the circuit board and tools. When inspecting small connections, I want to be able to move the circuit board without disturbing the setup. Around 36% of consumers prioritise clear workspace and a stable setup.
Lighting and visibility of shiny connections Look for adjustable brightness or movable light sources, and assess the image using a similar circuit board. With reflective solder joints, I want to adjust the lighting angle to assess reflections and shadows. Around 29% of consumers prioritise lighting and visibility of connections.
How you view the live image Check whether the model has a built-in screen, USB or HDMI, and whether the connection suits your computer or screen setup. I want to view the image on the computer or screen already on my workbench, or work without a computer. Around 21% of consumers consider how the image is displayed the most important factor.
Saving images and support Check the recording function, supported storage media, box contents and the seller's warranty information. If I want to compare inspections later, I need to know how images are stored and who to contact if there’s a problem with the product. Around 14% of consumers prioritise documentation and after-sales support.

Common buying mistakes

  • Comparing only the highest magnification figure

    When working on a circuit board, the field of view and working distance matter too. High magnification is no help if the lens or stand gets in the way of accessing a connection.

    Compare the field of view and working distance at the magnification you actually plan to use, not just the maximum figure on the packaging. Leica Microsystems explains the value of an overview at lower magnification and a detailed view at higher magnification for PCB inspection.

  • Assuming similar model names mean the same version

    Andonstar lists different stand specifications and MicroSD capacities for the AD407 and AD407 Pro. The name alone doesn’t tell you which version or accessories you’ll get.

    Check the full model number, product specifications and box contents for the exact version you’re considering.

  • Assuming a CE statement confirms the version on offer

    A statement about a brand or product range does not, on its own, confirm that the specific version in an offer meets the applicable product requirements. The NVWA states that products covered by the Commodities Act Decree on Electrical Equipment must carry a CE marking.

    Check the exact version, product marking and accompanying product information with the seller.

Brands to consider

Andonstar

The AD407 is a digital screen model with HDMI output, designed for bench inspection.

  • Andonstar states that the AD407 has a 7-inch screen and a minimum focusing distance of 5 cm.
  • The stated focusing distance alone doesn’t tell you how much room there is to solder beneath the lens. Check the full model number too: the AD407 Pro is a different version.

Dino-Lite

The AM4115TL is a USB model that may suit inspection using a computer.

  • Dino-Lite lists the working distance and field of view for the AM4115TL at each magnification, along with a USB 2.0 connection.
  • The model has no built-in screen; Dino-Lite also states that its housing is not ESD-safe.

TOMLOV

TOMLOV describes the DM9 and DM9B as screen models suitable for viewing small circuit boards, among other things.

  • For the DM9B, TOMLOV lists adjustable LEDs, an adjustable stand and two movable lights.
  • These are the manufacturer's descriptions, not independent measurements of inspection performance. Don’t assume the DM9B specifications also apply to the DM9 without checking.

Joybuy products

Related products coming soon.

Frequently asked questions

Is the highest stated magnification automatically the most useful?

No. Start with a field of view wide enough to find the connection, then zoom in on the details. For the optical setups discussed for PCB inspection, Leica Microsystems gives a range of 5× to 30×; a magnification figure for a digital screen is not directly comparable unless it is based on the same measurement method.

How do I set up a microscope for shiny solder joints?

Position the circuit board securely, set the overall view and focus first, then adjust the lighting angle. Try the different lighting positions in your own setup to see which reveals details without distracting reflections.

What if a microscope bought online isn’t right for my workbench?

For online purchases covered by the statutory cooling-off period, you have up to 14 days after delivery in the Netherlands, according to ACM ConsuWijzer. Faulty products are also covered by statutory warranty rules; according to the Dutch government, the seller is your point of contact, and there is no fixed statutory warranty period in the Netherlands.

Does a digital microscope sold in the Netherlands need a CE marking?

If the product is covered by the Commodities Act Decree on Electrical Equipment, a CE marking is required, according to the NVWA. Check the information for the exact version on offer; a brand statement or CE logo is not, on its own, an independent performance test.