Circuit board builder at the workbench
Wants to inspect joints and potential solder bridges without the camera or stand getting in the way. Elektor Magazine describes a microscope as a tool for checking solder joints.
Start by considering how much room you need above the circuit board, then choose between a microscope with its own screen and USB display on a computer. Adjustable lighting can help when light conditions vary, while a polariser is another option for shiny solder joints. Check the working distance, power supply, stand and storage for each version; product specifications are not an independent measure of inspection results.
Wants to inspect joints and potential solder bridges without the camera or stand getting in the way. Elektor Magazine describes a microscope as a tool for checking solder joints.
Wants to transport the setup and use it on a temporary table. The choice between a built-in screen and USB display partly depends on the computer and power supply available.
Wants to save or show photos or videos of small components, so checks the connections and storage for each model.
First check that your circuit board and tools will fit under the microscope. Then decide how you want to view the image and whether you need lighting or recording features.
| What to consider | What should you check? | Which consumers is this most important to? |
|---|---|---|
| Working space and stability | Compare the working distance at the magnification you want to use, how adjustable the stand is and the dimensions of your circuit board. | When working above a circuit board, you’ll want room for your hands and tools. Around 36% of consumers give working space and a stable setup top priority. |
| Transport and image display | Check the dimensions, power requirements, cables and compatibility with the device you want to view the image on. | For a temporary spot at a fair, you’ll want to know whether you need your own screen or a computer, and how easy the setup is to transport. Around 29% of consumers prioritise portability and standalone viewing. |
| Shiny solder joints | Check whether the lighting is adjustable or a polarising filter is included, and whether you can position the setup as needed. | With shiny solder, you’ll want to assess details without reflections getting in the way. Around 21% of consumers make reflection control their top priority when choosing. |
| Saving and connecting images | Check computer compatibility, video output, storage method and what’s included with the exact version. | If you want to save or show inspection images, the storage and connections need to work with your equipment. Around 14% of consumers prioritise image capture. |
The magnification figure alone doesn’t tell you how much room will be left above the circuit board. Working distance and the setup you choose matter too.
Check the working distance, field of view and stand at the magnification you actually plan to use.
The Dino-Lite AM4115ZT uses USB 2.0 and computer software, while the Andonstar AD207S has a built-in screen. You’ll therefore need different equipment to view the image.
Decide in advance what you want to view the image on, and check that the equipment and software you need are suitable for your setup.
A suitable computer is needed for a USB setup; you may also need a stable holder.
A recording function doesn’t automatically mean that a storage device is included in the box. The Andonstar AD207S requires a microSD card for storage; this is not included.
Check what’s in the box for the exact version before you buy.
According to ACM ConsuWijzer, your statutory guarantee depends on what you could reasonably expect from the product during normal use. It isn’t automatically limited to a stated manufacturer’s warranty period.
Keep your proof of purchase and contact the seller if the product is faulty.
Screen models for electronics inspection. Andonstar says the AD207S has a 7-inch screen, HDMI and an adjustable stand.
USB microscopes. The AM4115ZT is worth considering if a compact viewing head and reflection control are important to you.
Screen models for hobbyist inspection. TOMLOV also describes the DM9 as suitable for microsoldering; a Dutch product listing specifies a 7-inch screen.
It depends on the working distance and stand of the version you choose. The manufacturer describes the Andonstar AD207S as having an adjustable metal setup for soldering, but this doesn’t confirm that there will be enough room for every circuit board. Follow the instructions for the model you’re using.
First decide whether you want to use a built-in screen or a computer to view the image. Andonstar lists a 5 V/2 A power supply and HDMI/USB for the AD207S; the Dino-Lite AM4115ZT uses USB 2.0 and computer software. Check which power supply and cables are included, and whether the exact version is compatible with your equipment.
It depends on the model. According to Andonstar, the AD207S supports microSD cards up to 64 GB, but the card isn’t included. Check what’s in the box for other versions; don’t assume they offer the same storage options.
According to the Dutch government, distance sales often come with a 14-day cooling-off period, subject to exceptions. ACM ConsuWijzer explains that you also have a statutory guarantee if, during normal use, a product doesn’t meet the standard you could reasonably expect. The circumstances of the purchase and the problem determine which rights apply.
EU rules may require electrical and electronic equipment to have a CE marking. According to the European Commission, CE marking is only mandatory when the applicable harmonised rules specifically require it. So check the specific microscope and any electrical parts supplied with it; a CE logo isn’t, in itself, an independent test result.