Who is this buying guide for?

Mixer with a crowded desk

You want to find out first whether two speakers will fit and can be positioned symmetrically around your listening position. Measure the space taken up by the cabinets and stands; Genelec recommends a symmetrical setup, with a 60° angle between the monitors.

Mixer assessing the acoustic low end

You want to assess low instruments and room sound without treating frequency limits measured under different conditions as equivalent performance. Manufacturers, for example, specify limits at −6 dB, −10 dB or ±3 dB; these figures are not directly comparable.

Mixer with existing recording equipment

Your choice also depends on the outputs on your computer or audio interface, and on what’s included in the box. Models list different connections, such as USB-C, TRS, RCA or XLR; Genelec sells the 8010A individually.

What should you look for when buying?

First measure the space for both speakers and your listening position. Then compare the connections and check that the set includes everything you need for stereo.

What to consider What should you check? Who should consider this?
Placement and desk space Measure the width and depth, including space for stands and cables, and check that the left and right speakers fit symmetrically around your listening position. If your desk is crowded, you’ll want to know whether both monitors can be positioned correctly and fit the space. Around 33% of consumers say placement is their top priority.
Assessing bass and room sound Check the measurement conditions for the frequency range and take your listening space into account. When mixing an acoustic recording, you’ll want to assess low instruments and room sound carefully. Around 27% of consumers put this first.
Connecting to existing equipment Note the outputs on your computer or interface and compare them with the inputs on the exact model. If you want to keep using your existing equipment, the connection route needs to be compatible. Around 20% of consumers make compatibility their top priority.
Complete stereo set Check how many monitors are included and whether stands, cables or a calibration microphone come in the box. If you want to monitor in stereo straight away, check whether the box contains both speakers and the necessary components. Around 20% of consumers prioritise a complete set.

Common buying mistakes

  • Using a frequency limit in hertz as a straightforward ranking

    The models listed use different measurement conditions, including −10 dB, −6 dB and ±3 dB. Your listening space also affects how the bass sounds.

    Compare frequency ranges only alongside their measurement conditions, and, if needed, check your mix on a second, familiar playback system too.

  • Mistaking a single monitor for a stereo pair

    What’s included varies by model: Genelec states that each box contains one 8010A, while ADAM Audio describes the D3V as a set of two.

    Before buying, check the number of speakers and the components included with the exact version.

    You’ll need two Genelec 8010A monitors for stereo.

  • Assuming a compact cabinet solves placement problems

    A small cabinet takes up less space, but asymmetrical placement and reflections can affect the stereo image.

    Plan your listening position and the placement of both monitors first; then choose a cabinet size that fits.

  • Assuming every version includes calibration equipment

    IK Multimedia lists a measurement microphone with the pair version of the iLoud Micro Monitor Pro; this doesn’t automatically apply to every version.

    If the measurement microphone matters to your choice, check the exact model and what’s included in the box.

Brands to compare

ADAM Audio

The D3V is an active desktop stereo set for a compact setup, with USB-C audio or balanced TRS inputs.

  • ADAM Audio lists two speakers and angled stands; each speaker measures 200 × 115 × 150 mm without its stand.
  • The stated lower limit of 45 Hz is measured at −6 dB and, on its own, doesn’t prove mix accuracy.

Kali Audio

The LP-UNF is an active ultra-nearfield stereo set that Kali Audio offers for desktop mixing.

  • Kali Audio lists USB-C, balanced TRS and RCA inputs, as well as settings for different desk and wall placements.
  • The stated 39 Hz is measured at −10 dB, and 54 Hz at ±3 dB. The manufacturer’s claims about stereo imaging are not based on an independent listening test.

Genelec

The 8010A is a small active analogue monitor to consider if cabinet width and an existing XLR connection are important to you.

  • Genelec lists a width of 121 mm including the Iso-Pod and one XLR input.
  • The box contains one monitor. You’ll need two for stereo; the stated lower limit of 67 Hz is measured at −6 dB.

PreSonus

The Eris 3.5 2nd Gen is sold as a pair for a compact analogue setup.

  • PreSonus lists balanced TRS, RCA and 3.5 mm inputs, a headphone output, and high- and low-frequency controls.
  • The stated range of 80 Hz to 20 kHz doesn’t use the same specified tolerance basis as the frequency data for some other models; don’t use it to create a direct performance ranking.

IK Multimedia

The iLoud Micro Monitor Pro is a compact standalone monitor with ARC X calibration.

  • IK Multimedia lists balanced XLR and RCA inputs; according to the manufacturer, the pair version includes a measurement microphone.
  • Check the version and what’s included in the box. The manufacturer’s description of its accuracy is not an independent performance test.

Joybuy products

Related products coming soon.

Frequently asked questions

How can you position two monitors if your desk is narrow?

You can position the monitors symmetrically, angle them towards your listening position and aim for a 60° angle between the speakers, following Genelec’s placement advice. If they won’t fit on your desk, first look at alternative setups rather than simply choosing smaller cabinets; the space affects what you hear.

Does USB-C on every studio monitor replace your audio interface?

No, USB-C doesn’t automatically replace your audio interface. ADAM Audio lists USB-C audio and analogue TRS for the D3V; Genelec lists an analogue XLR input for the 8010A. Choose a connection route that suits the outputs on your equipment.

What should you do for maintenance or if there’s a fault?

Follow the manual for the exact model. For the D3V, ADAM Audio instructs you to switch off the system before connecting or disconnecting cables or cleaning components, and to leave servicing to qualified personnel. If a product is faulty, contact the seller; your statutory rights are separate from any manufacturer’s warranty.

Can you return a pair bought online, and is a two-year legal guarantee always available?

For eligible distance purchases from a business, the Dutch government says you’ll often have a 14-day cooling-off period, but there are exceptions. According to the Dutch government, the Netherlands doesn’t have a fixed legal guarantee period of two years; you’re entitled to a product that is fit for purpose, depending on what you can reasonably expect from it.

Does a CE logo alone prove that a studio monitor has been independently approved?

No. According to the European Union, CE marking is required when specific harmonised product rules say it is; there is no central EU body that issues a general CE certificate. So don’t take the logo as evidence of an independent listening test.