Who is this guide for?

Workshop participant using simulation software

You want to build or run models locally. First, find out whether the workshop uses AnyLogic, FlexSim or other software.

Participant running scenarios

You expect to run several models or experiments and want to choose a processor and memory to suit the task.

Participant with limited workspace

You’re looking for a compact setup and want to know in advance which screens and peripherals you’ll still need.

What should you look for?

What to consider What to look for Who is this important for?
Software compatibility Ask which software and version the workshop uses. For FlexSim 27.0, Autodesk lists, among other things, Windows 11, an x64 processor, at least 16 GB RAM and OpenGL 3.1 support. These are not general requirements for every workshop. AnyLogic lists 4–8 GB RAM and a modern processor with at least two cores. If you want to be sure the workshop software will run on your desktop, check the exact requirements first. Around 40% of consumers put software compatibility first.
Processing and model runs Ask whether you’ll run one model at a time or use FlexSim Experimenter or Optimizer for concurrent runs. Autodesk says the latter approach uses multiple CPU cores and memory; more cores don’t automatically mean a shorter run for a single model. If you want to run lots of scenarios or replications at once, choose a configuration to suit. Around 30% of consumers prioritise processing for model runs and experiments.
Workspace and connections Check whether a screen is available and whether the PC connects to the screens, power supply and input devices at the workshop. Lenovo notes that a screen is sold separately for the Tiny model examined. If you’re working in a small or not-yet-equipped space, you’ll want to know in advance what you can connect and bring with you. Around 20% of consumers prioritise the workshop setup.
Included components Check what’s included with the exact model, such as the operating system, memory, storage and peripherals. The product listing for the MSI CUBI NUC 1MG-244BEU doesn’t specify an operating system and describes the model as a barebone. If you want to start the workshop without missing components, check what the PC actually includes. Around 10% of consumers make a complete setup their top priority.

Pitfalls to avoid

  • Assuming all simulation software has the same RAM requirements

    AnyLogic and FlexSim 27.0 specify different hardware recommendations and requirements. A configuration that suits one programme won’t necessarily meet the requirements of the other.

    Before buying, ask which software, version and exercises the workshop will use, then compare them with the full configuration.

  • Confusing a product family with a specific model

    Models in the same range can have different processors or included components. For example, the Lenovo model examined lists an i5-14400T, while a Joybuy listing for an M70q specifies an i7-14700T.

    Compare the full model number and the specifications of the model on offer, not just the product range name.

  • Focusing only on the computer case

    A PC or barebone isn’t automatically a complete workshop setup; you may also need a screen, operating system or components.

    Before ordering, check what’s included and make a list of what you’ll need at the workshop.

Brands to consider

HP

The Pro Mini 400 G9 is a compact business desktop range. HP says model 6D494EA#ABH has Windows 11 Pro, 16 GB RAM and a 512 GB SSD.

  • HP’s configuration details make it easier to compare the model with the software requirements.
  • These specifications don’t show how quickly a particular simulation model will run.

Lenovo

The ThinkCentre M70q Gen 5 Tiny is a compact desktop range. For model 12TD0017MH, Lenovo lists an Intel Core i5-14400T, Windows 11 Pro, 16 GB RAM and a 512 GB SSD.

  • Lenovo describes how to access the device for maintenance and upgrades.
  • Check the exact configuration and whether a screen and the required components are included.

ASUS

The ExpertCenter D501MER is a mini-tower range for anyone who wants to factor upgrade options into their choice.

  • ASUS describes a tool-free chassis and an optional dedicated graphics card.
  • Specifications vary by model. Check which components are actually installed.

MSI

The Cubi NUC 1M is a compact range with memory and storage options. Model 1MG-244BEU is sold as a barebone.

  • MSI lists two memory slots and storage options for the range.
  • Check which components and operating system are included with the model you choose.

Joybuy products

This selection includes desktop PCs and mini PCs for local simulation and processing. Compare each model with the workshop requirements. Desktop PCs placed on the market in the EU are subject to applicable product safety requirements and CE marking rules; check the product information for the specific model on offer.

RGB Gaming PC with RTX 5060

RGB Gaming PC, Ryzen 5 5500, RTX 5060, 16 GB RAM

The listed 16 GB RAM meets the memory requirement Autodesk specifies for FlexSim 27.0; check the other software requirements too.

  • Ryzen 5 5500 with 6 cores
  • RTX 5060 with 8 GB
  • 480 GB SSD
  • Windows 11 listed as not activated
  • USB Wi-Fi adapter listed
View at Joybuy
Panoramic Gaming PC with Ryzen 7 5700X and RTX 5060 Ti

Panoramic Gaming PC, Ryzen 7 5700X, RTX 5060 Ti 8 GB

This model lists 16 GB RAM; compare the full configuration with the software used during the workshop.

  • Ryzen 7 5700X with 8 cores
  • 16 GB DDR4 RAM
  • 480 GB NVMe SSD
  • Windows 11 Home pre-installed, but not activated
  • USB Wi-Fi adapter listed
View at Joybuy
Gaming Desktop PC with Ryzen 7 7800X3D and RTX 5080

Gaming Desktop PC, Ryzen 7 7800X3D, RTX 5080

This model lists 32 GB RAM. Autodesk explains that FlexSim uses multiple CPU cores and memory when running several models at once.

  • Ryzen 7 7800X3D with 8 cores
  • 32 GB DDR5 RAM
  • RTX 5080 with 16 GB
  • 1 TB NVMe SSD
  • Windows 11 Trial
View at Joybuy
ACEMAGIC AK1PLUS mini PC

ACEMAGIC AK1PLUS Mini PC, Intel Celeron N5095

The compact mini PC may suit a small workspace; check the processor and other specifications against the workshop software.

  • Intel Celeron N5095, 4 cores and 4 threads
  • 16 GB RAM
  • 256 GB M.2 2280 SATA SSD
  • Windows 11 Pro
  • Two HDMI outputs and a VESA mounting bracket listed
View at Joybuy
ACEMAGIC E3B Mini Desktop with AMD Ryzen 5 7430U

ACEMAGIC E3B Mini Desktop, AMD Ryzen 5 7430U

The mini desktop format can be useful when desk space is limited; check that the connections work with the screens at the workshop.

  • AMD Ryzen 5 7430U with 6 cores and 12 threads
  • 16 GB RAM
  • 512 GB M.2 2280 SATA SSD
  • Windows 11 Pro
  • HDMI 2.0, DP 1.4b and USB-C; support for three screens listed
  • 128 × 128 × 41,3 mm case and VESA mounting bracket listed
View at Joybuy

Frequently asked questions

Do I need to choose Windows for this workshop?

If you’re using FlexSim 27.0 locally, Autodesk specifies a supported 64-bit version of Windows and an x64 processor. For the AnyLogic development environment examined, the manufacturer also lists tested macOS and Linux platforms. So first, ask which software and version the workshop uses.

How should I prepare my PC for the workshop?

Check in advance that the software is installed and that the screen and input devices can be connected. AnyLogic lists external services for certain functions and notes that many are optional; check whether the functions you’ll need during the workshop require network access.

Is a barebone ready to use straight away?

Not until you’ve checked exactly what’s included. The MSI Cubi NUC 1MG-244BEU is described as a barebone, and the product listing doesn’t specify an operating system. Also check which memory and storage are installed.

What cancellation period and warranty apply to online purchases in the Netherlands?

When you buy from a business at a distance, you generally have a 14-day cancellation period, subject to legal exceptions. According to the Dutch government, there is no fixed term for the statutory guarantee in the Netherlands: you’re entitled to a product that works as it should, and you can contact the seller if there’s a fault.

What product safety information should I check?

Electronic devices placed on the market in the EU are subject to applicable safety requirements and CE marking rules. Check the marking and product information for the specific model on offer; a similar model name doesn’t prove that the product meets the requirements.