Who is this choice for?

Producer with a crowded desk

If you mix directly in front of a screen, you’ll need space for both speakers and a usable stereo setup. Measure the space on either side of your screen: compact dimensions alone don’t guarantee that a stereo pair will fit properly.

Producer assessing kick and bass

A frequency specification doesn’t measure what you’ll hear at your listening position. Check the stated measurement limit and consider the effect of your desk, room and listening position too.

Producer with an existing interface

If you want to use your current audio interface, compare its outputs with the inputs on the exact monitor model. Depending on the model, manufacturers list connections such as USB-C, balanced TRS, RCA and stereo mini-jack.

What should you look for when buying?

First, work out whether you can position two speakers symmetrically on your desk. Then compare the connections on your audio source and consider what you need to assess kick and bass at your listening position.

Key consideration What to look for Who is this important for?
Positioning two monitors Measure the available width and depth for both speakers. Check whether you can place them at a similar height and angle them towards your listening position. If I have little space next to my screen, I want to know whether two speakers will fit and be practical. Around 33% of consumers prioritise ease of placement.
Assessing kick and bass Compare frequency specifications only when they use the same stated dB measurement limit. Consider the room and listening position; a subwoofer needs to be properly integrated with the main monitors. If I want to assess kick and bass, I don’t want to confuse a specification with what I can hear in my room. Around 27% of consumers prioritise low-end control.
Connection to your audio source Note the outputs on your computer or interface and compare them with the inputs and supplied cables for the specific version. If you want to keep using your existing computer or interface, first check which connection will work with it. Around 20% of consumers prioritise connectivity.
The effect of your desk and room Consider how symmetrical your setup is, how far it is from the walls, and whether there are any positioning or room-control settings. If I want to avoid my setup affecting how I assess a mix, I consider both sides of my listening position. Around 20% of consumers prioritise the effect of the room.

Common buying mistakes

  • Assuming the lowest frequency figure means better bass

    Manufacturers such as ADAM Audio, Kali Audio and Yamaha state frequency limits using different dB measurement references. Your room and listening position also affect what you actually hear.

    Check the measurement reference for the stated frequency response, then assess the setup at your own listening position rather than choosing based on a single figure.

  • Measuring just one speaker

    Stereo requires space for both speakers and a practical setup that is preferably symmetrical.

    Measure both positions beside your screen and check the height, angle and distance from nearby walls.

  • Assuming the connection or stereo pair based on the product category

    The models reviewed differ in their inputs and in how the contents of each set are described. A category name doesn’t tell you which connections or components are included in a particular version.

    Compare the outputs on your audio source with the inputs on the exact model, and check which cables and speakers are included in the specific offer.

    You may need suitable cables for a different connection setup. Check the connections and what’s included before placing your order.

Brands to compare for this choice

ADAM Audio

ADAM Audio describes the D3V as an active desktop set with USB-C and balanced TRS inputs.

  • ADAM Audio lists detachable stands and positioning settings.
  • The stated lower limit is 45 Hz at −6 dB; this isn’t a measurement in your room.

Kali Audio

Kali Audio describes the LP-UNF as designed for desktop mixing, with USB-C, balanced TRS and settings for different desk and wall positions.

  • Kali Audio lists a frequency response of 39 Hz at −10 dB and a frequency range of 54 Hz at ±3 dB.
  • The 39 Hz figure isn’t directly comparable with a limit stated using a different dB measurement reference.

Yamaha

According to the Dutch product specification, the HS3 is a compact active stereo set with analogue combo XLR/TRS, RCA and stereo mini-jack inputs.

  • The specification lists room-control and high-trim switches, and confirms that the speakers are supplied as a pair.
  • Yamaha states a lower limit of 85 Hz at −3 dB; bear this in mind if deep bass is important to you.

IK Multimedia

IK Multimedia describes the iLoud Micro Monitor as a small stereo set for a desk with limited space and a compatible analogue audio source.

  • IK Multimedia lists RCA and 3.5mm stereo inputs, and confirms that two speakers are included.
  • The stated 45 Hz is measured at −10 dB; the specification doesn’t list a USB-C input.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as an analogue stereo set with balanced TRS, RCA and 3.5mm stereo inputs.

  • PreSonus lists high- and low-frequency controls and a headphone output on the front.
  • The stated range of 80 Hz–20 kHz doesn’t, on its own, show how the set will reproduce the bass in an electronic track at your listening position.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors on a small desk?

Place the left and right speakers at a similar height and angle them towards your listening position. Genelec recommends an equilateral triangle as a starting point; first measure whether your desk allows for this setup.

Do I need a subwoofer straight away for electronic music?

No, not necessarily. First assess what you can hear with your current setup at your listening position. If you add a subwoofer, you’ll need to adjust its placement and integration with the main monitors, including the level and phase.

Can I connect studio monitors directly to my computer?

That depends on the connections available on your computer and the exact monitor model. ADAM Audio lists USB-C for the D3V, as does Kali Audio for the LP-UNF. According to their specifications, the Yamaha HS3 and IK Multimedia iLoud Micro Monitor have analogue inputs. Also check which cables are included with the version you’re buying.

What should I look for in powered monitors for the Dutch market?

Check the power supply and safety information for the exact version. The EU Low Voltage rules apply to electrical equipment within their scope, including equipment with a rated AC voltage of 50 to 1,000 V. CE marking is required when applicable harmonised EU rules say it is; so check the specific version.

What are my rights if a pair I bought online isn’t as described?

For online purchases by consumers in the Netherlands, there is generally a statutory 14-day withdrawal period, subject to legal exceptions. The seller is also responsible under the statutory guarantee if the product doesn’t conform; a commercial guarantee doesn’t replace that responsibility.