Who is this set-up suitable for?

Listeners with sensitive earphones

If you listen in a quiet room, you may want to focus on noise and on being able to adjust the volume accurately at low levels. Compare the gain setting and the output you plan to use.

Listeners with hard-to-drive headphones

Compare your headphones’ sensitivity and impedance with the output power at the relevant load and connection. Shure describes impedance and sensitivity as important headphone specifications; a maximum power figure alone doesn’t tell you whether the combination is suitable.

Listeners with headphones and speakers

If you want to connect both to the same desktop set-up, check which analogue line output is available and whether it offers fixed or variable volume.

What should you look for when choosing?

What to consider What to look for Who is this important for?
Noise and low-volume listening Check the gain settings, volume control and noise specification for the output you’ll use. In a quiet room, I want to enjoy listening at low volume without distracting noise; around 33% of consumers prioritise quiet operation and low-volume control.
Driving your headphones Compare sensitivity and impedance with the power output at the relevant load, and check that it’s for the output that matches your plug. If my headphones need more output headroom, I want to compare figures that apply to my connection and load; around 27% of consumers prioritise driving power.
Inputs and speaker connections Check that the inputs suit your sources and that the line output and volume setting work with your speakers. If I want to connect another source or speakers as well as my computer, the right inputs and outputs are essential; around 20% of consumers prioritise extra connections.
Power supply and desk space Check the power method and cables required; USB power requires a computer port that can supply enough current. To keep my desk tidy, I want to know how much extra power equipment and cabling the set-up needs; around 20% of consumers prioritise straightforward positioning and power.

Common mistakes when choosing

  • Assuming the highest power figure proves it’s suitable

    Power ratings apply to a particular load and output. FiiO specifies a maximum of 1,400 mW at 32 Ω from the balanced output of the K11; that figure doesn’t automatically apply to the other output or to every pair of headphones.

    Compare your headphones’ impedance and sensitivity with the specification for the output you’ll actually use.

  • Assuming every desktop DAC is powered via USB

    The FiiO K11 uses an external 12V power supply. The iFi ZEN DAC 3 manual describes USB-C as providing both audio and power. Power requirements therefore vary by model.

    Before setting aside space on your desk, check the power connection and which cables or components you’ll need for your set-up.

  • Confusing a headphone output with a speaker output

    With active speakers, the available analogue line output and its volume setting matter; a headphone output isn’t the same thing.

    Compare your speakers’ input with the DAC’s line output, and decide where you want to control the volume.

Brands to compare

FiiO

The K11 is a desktop DAC/amplifier for anyone who wants to connect optical or coaxial sources as well as USB.

  • FiiO lists separate headphone outputs, three gain settings and an external 12V power supply.
  • The stated maximum output of 1,400 mW applies at 32 Ω to the balanced output. Compare the specification with the output you’ll use.

iFi audio

The ZEN DAC 3 is designed for a USB desktop set-up with headphones and, optionally, active speakers.

  • The manual lists USB-C for audio and power, 6.3mm and 4.4mm headphone outputs, and a fixed or variable analogue output.
  • Check that USB works as a digital input for your sources and that the line output is compatible with your speakers.

Fosi Audio

The ZH3 combines a DAC and headphone amplifier with preamp connections for a desk set-up with several devices.

  • Fosi says the ZH3 has USB, optical, coaxial and RCA inputs, as well as RCA and XLR outputs.
  • Published noise and power figures are manufacturer specifications. For each figure, check which output and load it applies to.

TOPPING

The DX1 II is an option if you want to handle both audio and power through a suitable USB connection on your computer.

  • According to the manual, the USB input handles both audio and power.
  • For a source that can’t supply enough USB power, TOPPING recommends a separate power solution with a Y-cable, which isn’t included. Bear this in mind if you also want to use another source.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I need a separate DAC amplifier if my headphones already work with my computer?

Not necessarily. First check whether you need more usable volume, are hearing interference or need particular connections. Then compare your headphones’ specifications with the output you plan to use. A higher maximum sample rate doesn’t, by itself, prove that you’ll hear an improvement.

How do I connect a USB DAC?

Connect your computer to the designated USB input, select the DAC as the audio output and start with the volume low. Your model’s manual will give you the correct connection and operating steps. For the ZEN DAC 3, iFi specifically warns you to turn the volume down before switching PowerMatch.

What are the warranty and cancellation rights in the Netherlands?

If a product is faulty, you can contact the seller about your statutory guarantee rights; the Dutch government states that there is no fixed statutory guarantee period. Online purchases usually come with a cooling-off period. ACM ConsuWijzer says this ends 14 days after delivery, although statutory exceptions may apply.

What product safety information can I check for an electrical appliance?

The Dutch government says that a manufacturer must put a CE mark on an electrical appliance after it has been tested and found to meet the requirements. A statement in an advert alone doesn’t confirm that a particular version meets the applicable requirements.

Is a more powerful amplifier safer for long listening sessions?

No. Having more power available doesn’t automatically make long listening sessions safer. Arboportaal warns that sound levels that are too high in the ear canal can cause hearing damage. Start quietly and don’t turn up the volume just because the amplifier can deliver more power.