Who is this guide for?

Listeners comparing recordings

You’re listening to existing versions or takes and mainly want a suitable wired headphone output and a consistent listening level. The Audacity guide describes loudness normalisation as a way to make audio from different sources sound roughly equally loud.

Sit-stand desk users

You want to be able to reach the volume control and headphone socket as your desktop changes height. So also consider the position of the connections, cable clearance and power supply.

Listeners who also record

As well as comparing existing files, you want to connect microphones or instruments. In that case, suitable inputs and the monitoring function are important; Focusrite and Audient describe these capabilities for their audio interfaces.

What should you look for when choosing?

Start with your headphones and how you plan to use the device: comparing existing recordings only, moving the DAC regularly or recording new audio as well. Then check that the controls, connections and power supply suit your workspace.

What to consider What should you check? Who is this important for?
Headphone output Check your headphones’ plug, impedance and sensitivity. Compare power specifications only when the loads and modes are appropriate. If I’m assessing recordings through my own headphones, I want to know whether the output is suitable. Around 36% of consumers prioritise suitable, consistent playback.
Controls and positioning Check where the volume control and connections are, and leave enough room for the device, plugs and cables at both desk heights. If I adjust my desk, I want to be able to reach the volume control without cables getting in the way. Around 29% of consumers place the greatest importance on controls and desk layout.
Portability Check the USB connection, headphone plug and output power in the mode you’ll actually use. If I need to take my DAC with my computer, a compact setup matters more than extra connections on the device. Around 21% of consumers are mainly looking for portability.
Recording inputs Decide which sources you want to connect, and distinguish between direct monitoring of an input and playing files from audio software. If I want to record with a microphone or instrument as well as listen back, I need suitable inputs. Around 14% of consumers mainly need a device for both recording and playback.

Common buying mistakes

  • Comparing power figures for different outputs or loads directly

    FiiO gives different power ratings for the KA13 depending on the output, load and desktop mode. Focusrite lists output figures for the Scarlett 2i2 4th Gen under specific load conditions.

    Only compare figures with stated test conditions, and check that the output is suitable for the headphones you use.

  • Choosing an audio interface because direct monitoring supposedly makes existing files sound better

    According to Focusrite, direct monitoring routes the input signal to the outputs. This function is designed for listening to an input; it doesn’t replace comparing files in software.

    Choose recording inputs to meet a specific need, and assess playback of existing recordings separately.

  • Assuming a desktop DAC is powered by USB alone

    According to FiiO, the K11 R2R requires DC 12 V/2 A. The iFi ZEN DAC 3 can be powered via USB, according to its manual; a separate 5V power supply isn’t included.

    Check the power requirements for the exact model, and consider how the cable will run when the desktop moves on a sit-stand desk.

Brands to consider

FiiO

The K11 R2R is a desktop option with a volume control and several connections; the KA13 is a compact USB DAC.

  • FiiO says the K11 R2R has 6.35 and 4.4 mm headphone outputs and an RCA line output. The KA13 has 3.5 and 4.4 mm outputs.
  • The K11 R2R requires DC 12 V/2 A. The KA13’s stated power figures depend on the output, load and desktop mode.

iFi audio

The ZEN DAC 3 is a USB desktop DAC and headphone amplifier, with volume control and outputs for headphones and other audio equipment.

  • The manual lists 6.35 and 4.4 mm headphone outputs, plus fixed or variable analogue outputs. USB power is supported.
  • A separate 5V power supply isn’t included, according to the manual. XBass+ is a switchable sound enhancement; turn it off if you want to compare without it.

Focusrite

The Scarlett 2i2 4th Gen is an audio interface for anyone who wants to record sources as well as listen back.

  • Focusrite lists two line/instrument inputs, separate headphone control and direct monitoring.
  • Focusrite lists an output impedance of 50 Ω for the headphone output. Check that it’s compatible with your headphones; direct monitoring is designed for the input signal.

Audient

The iD4 MKII is a compact audio interface for a workspace where recording and playback go hand in hand.

  • Audient lists recording inputs and two headphone sockets.
  • For the iD4 MKII, Audient specifies a minimum bus power of 0.9 A at 5 V via a USB 3.0 port. Check that the port you use meets this requirement.

Related products

Related products coming soon.

Frequently asked questions

Should I play recordings at the same volume to compare them?

Use the same headphones and output, and match the listening levels as closely as possible. The Audacity guide describes loudness normalisation as a way to make material from different sources sound roughly equally loud; bear in mind the purpose of your comparison when assessing the results.

Do I need direct monitoring to compare two existing recording files?

No. Compare existing files by playing them through your audio software. According to Focusrite, direct monitoring routes the input signal to the outputs and is designed for listening to the input while recording.

How do I connect the DAC without unexpectedly loud sound?

Check the power requirements and choose the correct headphone output for the exact model. Start at a low volume; iFi warns in the ZEN DAC 3 manual to turn the volume down before changing the gain setting.

How can I listen back for long periods responsibly?

Don’t turn the volume up to drown out background noise. VeiligheidNL recommends well-fitting headphones or earphones, so background noise is less likely to tempt you to turn up the volume.