Which solution is right for you?

Listening together

You compare recordings at the same desk and want to set your own listening volume independently. Also decide whether you need to hear the same signal or separate mixes; MOTU and Behringer describe models with independent volume controls.

Comparing on your own

You switch between recordings or headphones yourself and are looking for a wired DAC with a headphone amplifier to suit your equipment. FiiO and iFi describe models with adjustable gain.

Using an existing DAC

You already have a suitable analogue audio source and want to distribute its signal to several listening positions. Behringer describes the HA400 as an analogue splitter, not a standalone USB DAC.

What should you consider when choosing?

USB audio interface with two headphone outputs

Choose this option if: you want to listen together and each need your own volume control.

Trade-off: check whether both outputs carry the same mix or whether you need a separate mix; extra routing may require more configuration.

Desktop DAC with headphone amplifier

Choose this option if: one person is comparing recordings or headphones one after another.

Trade-off: multiple connections or a gain function do not automatically mean that two listeners can each adjust their own volume independently.

Existing DAC with an analogue headphone splitter

Choose this option if: you already have a suitable analogue output and several people want to hear the same signal.

Trade-off: the splitter needs a suitable audio source and cannot turn one signal into separate mixes.

What to consider What should you check? Who is this important for?
Consistent listening conditions Keep the source, mix, settings and listening volume the same; check how the signal is routed to the output you want. When I compare recordings one after another, I don’t want changes to the setup to be confused with differences between the recordings. Around 36% of consumers say consistent listening conditions are their main concern.
Listening together Check the number of usable outputs, whether volume can be controlled independently, and whether the outputs carry the same or separate signals. MOTU says the M6’s second output can follow output pair 3–4; Behringer says the HA400 has four outputs with independent volume controls. When we listen together, I want each of us to be able to set our own volume and to know whether we’re hearing the same mix. Around 29% of consumers say listening together is their top priority.
Headphone drive Check the connection and gain settings; compare power ratings only at the same load and under the stated measurement conditions. If I want to use my current headphones, I want to know whether the connection and gain settings are right for my setup. Around 21% of consumers say suitable headphone drive is their main concern.
Connections and power Check your computer port, any adapter you may need, the analogue source output and the required cables. MOTU says the M6 is USB bus-powered only when connected to USB-C hosts. For my shared desk, I want to know in advance whether the audio chain will connect to my computer and existing equipment. Around 14% of consumers put connections, power and equipment first.

Pitfalls to avoid when choosing

  • Mistaking a headphone splitter for a DAC

    The Behringer HA400 distributes and amplifies an analogue input signal; it does not provide a digital connection to a computer.

    Map out the signal chain from your computer to your headphones before choosing a splitter.

    You may also need a suitable DAC or another audio source, as well as a connecting cable.

  • Assuming two outputs mean two independent mixes

    Independent volume control and separate signal routing are different features.

    Check each one separately. On the MOTU M6, the second headphone output can follow output pair 3–4.

  • Comparing power ratings without checking the measurement conditions

    FiiO lists the K7’s power ratings at specific loads and 1% distortion. A rating on its own does not tell you how the amplifier will work with your headphones.

    Compare ratings only at the same stated load and under the same measurement conditions, and check the connection and required amplification.

  • Forgetting about power for your computer setup

    MOTU says the M6 is USB bus-powered only when connected to USB-C hosts; with other hosts, you need the supplied adapter.

    Check your host port and make sure you have a connection available for the adapter.

    You may need an extra free power socket at your workspace for the adapter.

Brands to consider

MOTU

The M6 is a USB audio interface for a shared workspace where two headphone outputs are useful, with the option of separate computer mixes.

  • MOTU lists two headphone outputs with independent volume controls; the second can follow output pair 3–4.
  • According to MOTU, USB bus power is available only with USB-C hosts; check the power requirements for your computer.

FiiO

The K7 is a desktop DAC with a headphone amplifier for a wired listening setup.

  • FiiO lists two hardware gain settings and power ratings for specified loads.
  • These ratings are not an independent assessment of sound quality, and they don’t show whether two listeners can each set their own volume.

iFi audio

The ZEN DAC 3 is a USB-C desktop DAC/amplifier with RCA line outputs.

  • iFi lists USB-C, RCA line outputs and a switchable gain function.
  • Check that the connections and gain setting suit your existing equipment and headphones.

Behringer

The HA400 is an analogue headphone splitter for sharing an existing audio source.

  • Behringer lists four headphone outputs with independent volume controls and a supplied 12V adapter.
  • The HA400 is not a standalone USB DAC and distributes a single incoming signal.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can two headphone sockets automatically play two different recordings?

No, don’t assume that based on the number of sockets. According to MOTU, both headphone outputs on the M6 normally follow monitor outputs 1–2; using the 3–4 switch lets the second output follow a different output pair and therefore a different computer mix.

Can I use an analogue headphone splitter directly as a USB DAC?

Not the Behringer HA400: according to Behringer, this model is a four-channel analogue headphone amplifier. For digital playback from a computer in this setup, you’ll also need a suitable DAC or another analogue audio source.

What should I check when connecting a MOTU M6 to my computer?

Check the host port and power supply. MOTU says USB bus power is available with USB-C hosts; with other hosts, you’ll need the supplied DC adapter. Also decide whether both listeners will hear the same mix or whether the second output should follow output pair 3–4.

How can I avoid listening at unnecessarily high volumes?

Start at a low volume, increase it only as needed and take breaks. The World Health Organization points out that both sound level and listening time matter; having more amplifier power available is not a goal in itself. The guidance does not specify the actual sound level produced by your headphones.

Which Dutch rules and consumer rights are relevant when buying?

ACM ConsuWijzer says that online purchases generally come with a 14-day cooling-off period, starting from delivery; legal exceptions may apply. According to the Dutch government, there is no fixed statutory guarantee period in the Netherlands. If a product is faulty, contact the seller.