Who is this for?

Listeners short on desk space

You want to connect wired headphones without the unit, power supply and cables taking up too much room. The stated dimensions and connections of models such as the FiiO K11 and Fosi Audio SK02 can help you work out how much space you’ll need in advance.

Listeners who want to drive their headphones

You want to match the output and gain to your specific headphones, rather than looking only at a high resolution or power rating. Manufacturers such as FiiO, Fosi Audio and iFi audio list different connections and gain options for each model.

Listeners with multiple audio sources

You might want to connect a computer and another digital source, or active speakers, in the same listening space. Compare the actual inputs and outputs on the FiiO K11 and iFi ZEN DAC 3 with your own equipment.

What should you look for when buying?

First, check that the DAC suits your desk, source and headphones. Then decide whether your existing connection and settings are already enough for your lossless music.

What to consider What should you check? Which consumers is this important for?
Space and power Measure the available space, allowing for cable bends, and check the power supply. Fosi Audio lists the SK02 as 121 × 51 × 43 mm and USB-powered; according to FiiO, the K11 measures 147 × 133 × 32,3 mm and uses a separate 12 V/2 A power supply. If space is limited, I also want to know how much room the cables and power supply will take up. Around 33% of consumers put space and power first.
Headphone output and gain Check your headphones’ plug, impedance and sensitivity, and compare the figures for that exact output and load. FiiO lists different gain modes for the K11; iFi recommends turning the volume down before switching PowerMatch on the ZEN DAC 3. If I want my wired headphones to work well with the unit, I look for a suitable output and gain. Around 27% of consumers put headphone compatibility first.
Connections for sources and speakers Check which output your source actually has and whether the DAC offers the right input. According to FiiO, the K11 has USB, optical and coaxial inputs; the iFi ZEN DAC 3 has a USB-C input and RCA line outputs with a fixed or variable setting. If I want to connect multiple sources or active speakers, I check for the connections my equipment needs. Around 20% of consumers put connectivity first.
Lossless signal and existing output Check that lossless is enabled in your music app and find out what your current source and wired output support. Apple says certain compatible Macs can play full-resolution audio through their built-in headphone socket. If I want to listen to lossless music, I first want to know whether my current source and settings are already suitable. Around 20% of consumers put the signal chain first.

Common buying mistakes

  • Assuming a high PCM or DSD rating means better sound

    A DAC’s specifications don’t automatically tell you what signal your source sends or which settings your music app uses. Apple also says certain compatible Macs can already play full-resolution audio through their built-in headphone socket.

    Check your source, playback settings and existing output first. Consider buying an external DAC if you’re missing a connection or feature you need.

  • Comparing output power without checking the connection and load

    The stated figures for the FiiO K11 apply to specific outputs and loads. The official Fosi Audio product page also lists both 1100 mW and 755 mW for the SK02’s 4,4-mm output at 32 Ω, so these figures aren’t a reliable basis for a direct power comparison.

    Only compare figures for the same output, load and measurement conditions. Check that your headphone plug fits, too, and start at a low volume when connecting.

    You may need a different headphone cable if its plug doesn’t fit the output you’ve chosen.

  • Measuring only the unit itself

    A separate power supply and cables take up space too. USB-powered models, in turn, depend on the power supply and compatibility of the connected source.

    Measure the available space, allowing for cable bends, and check in advance which power supply and connections your source requires.

Brands to consider

FiiO

The K11 is a desktop DAC/headphone amplifier for anyone who wants to connect multiple digital sources and use different headphone outputs.

  • FiiO lists USB, optical and coaxial inputs, 6,35-mm and 4,4-mm headphone outputs, and an RCA output.
  • The unit measures 147 × 133 × 32,3 mm and uses a separate 12 V/2 A power supply. The stated maximum of 1400 mW per channel applies to the balanced output and a 32 Ω load; don’t compare it without taking these conditions into account.

Fosi Audio

The SK02 offers a compact, USB-powered option with 3,5-mm and 4,4-mm headphone outputs. The K5 Pro is a different product line.

  • Fosi Audio lists the SK02 as measuring 121 × 51 × 43 mm, with USB and optical inputs and USB-C power. For the K5 Pro, the manufacturer lists features including tone controls and a microphone input.
  • The official SK02 product page gives conflicting power figures for the 4,4-mm output at 32 Ω: 1100 mW in the description and 755 mW in the specifications table. Don’t treat either as a confirmed figure for comparison.

iFi audio

The ZEN DAC 3 is a USB DAC/amplifier with headphone outputs and the option to connect active speakers.

  • The manual lists 6,35-mm and 4,4-mm headphone outputs, as well as RCA line outputs with a fixed or variable setting.
  • iFi recommends turning the volume down before switching PowerMatch. These connections and settings don’t provide an independent comparison of sound quality.

TOPPING

TOPPING presents the DX1 II mainly as a model for computer use: a USB-focused option alongside devices with a wider range of inputs.

  • According to TOPPING, a computer’s USB port can generally provide a more stable, continuous power supply.
  • TOPPING warns that a phone may sometimes provide insufficient power or may not be compatible. Check that they’ll work together before using a phone as your source.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need an external DAC for lossless music?

No, not always. First, check your source, headphone output and playback settings. Apple says certain compatible Macs can play full-resolution audio through their built-in headphone socket. For Apple Music on an iPhone or iPad, Apple specifically recommends an external DAC for tracks above 48 kHz.

How can I avoid the wrong sample rate during playback?

Enable lossless in the app you’re using and check your device’s audio settings. TOPPING explains that, on the DX1 II, the displayed value is the sample rate of the incoming signal; the system or playback software may convert the music first. An exclusive playback mode can prevent this with supported software.

What should I do when connecting or switching headphones?

Check the plug and selected output, and start at a low volume. The iFi manual recommends turning the volume down before switching PowerMatch. The World Health Organization recommends limiting listening volume and duration; its guideline of 80 dB for up to 40 hours per week isn’t a guaranteed safe setting for a volume control.

What warranty and cancellation period apply to purchases in the Netherlands?

According to the Dutch government, there’s no fixed term for the statutory guarantee in the Netherlands: you’re entitled to a product that works as it should, and its reasonable lifespan depends on the product and the circumstances. For online purchases from a business, a 14-day cancellation period applies in many cases; check the terms and exceptions that apply to your purchase.

What product safety rules apply to a DAC sold in the Netherlands?

According to Business.gov.nl, the Dutch government’s business information service, sellers of electrical and electronic equipment must ensure that products meet the applicable European requirements, including those for safety and electromagnetic compatibility. Where the rules require CE marking and an EU declaration of conformity, responsibilities apply throughout the product supply chain. CE marking is not a quality mark and doesn’t prove better audio quality.