Who is this setup for?

Listeners at a shared desk

If you compare existing recordings on headphones, you can be considerate of your colleagues by paying attention to sound leakage and listening volume. Shure explains that closed-back headphones let less sound escape, while the World Health Organization notes that both volume and listening time matter.

Critical headphone listeners

If you use wired headphones, you’ll benefit from a suitable connection and control over the volume and any sound settings. FiiO, iFi audio and RME describe different connections and adjustment options for their models. Audio-Technica suggests considering a headphone amplifier if your current output doesn’t provide the volume you want.

Creators who also record

If you want to connect a microphone or analogue source as well as play audio, you could consider an audio interface. Focusrite describes the analogue inputs and direct monitoring available on the Scarlett 2i2 4th Gen.

What should you look for when choosing?

First assess your headphones and your computer’s existing audio output. Then work out which connections or controls you’re missing, and only then decide between a DAC amplifier and an audio interface.

What to considerWhat to look forWho should prioritise this?
A quiet workspace Check whether your headphones let little sound escape and keep the volume manageable; extra amplifier power won’t prevent sound leakage. If I listen close to colleagues, I want to disturb them as little as possible and keep my volume under control. Around 31% of consumers prioritise a quiet workspace.
Connections and comparisons Check that the plug matches the output. Only compare power ratings when the output and load are the same, and keep the headphones, volume and any processing consistent. If I want to compare recordings fairly, I need to connect my headphones properly and keep the settings the same. Around 31% of consumers give connections and comparability top priority.
A practical desk setup Check what power supply and connections your chosen model requires. FiiO lists a DC 12 V/2 A power supply for the K11; iFi audio describes the ZEN DAC 3 as USB-powered. If I have limited space or work in different locations, I want to know in advance which power supply and cables I’ll need. Around 25% of consumers prioritise a practical desk setup.
Recording inputs Decide whether you’ll only play existing files or also connect and directly monitor microphone, instrument or line-level signals. If I want to record or monitor signals directly as well as listen, I need suitable inputs. Around 13% of consumers prioritise recording inputs.

Common buying mistakes

  • Buying a more powerful DAC to solve noise problems at the office

    Sound leakage is also affected by the design of your headphones. Shure explains that closed-back headphones let less sound escape; an amplifier won’t change this.

    Start by assessing your headphones and listening volume. Then check whether your existing output is underpowered or you need a different connection or control.

  • Comparing power ratings from different outputs directly

    FiiO lists different power ratings for the K11 depending on the output and headphone load. One figure therefore won’t necessarily tell you how another output will perform with your headphones.

    Only compare specifications for the same output, load and measurement conditions, and take your headphones’ sensitivity into account too.

  • Assuming a power supply or recording inputs are included without checking the model

    The FiiO K11 requires a separate DC power supply, while the iFi ZEN DAC 3 can be powered via USB, according to its manual. A DAC designed for playback also won’t automatically have the analogue inputs of an audio interface.

    Before you buy, distinguish between playback and recording, and check the chosen model’s power requirements, connections and included accessories.

Brands to consider

FiiO

The K11 is designed for a permanent desk setup where you want a physical volume control and several digital inputs.

  • FiiO specifies 6,35mm and 4,4mm headphone outputs and an RCA line output for the K11.
  • The K11 requires a separate DC 12 V/2 A power supply. Power ratings apply to specific outputs and loads.

iFi audio

The ZEN DAC 3 is a USB desktop model with headphone and line outputs, plus adjustable gain.

  • The manual lists 6,35mm and 4,4mm headphone outputs and USB power.
  • PowerMatch and XBass+ change the settings. Keep them consistent or switch them off when comparing.

RME

The ADI-2 DAC FS is worth considering if you want adjustable listening features and a dedicated IEM output.

  • RME specifies features including an equaliser, crossfeed and a headphone output.
  • Processing settings can change what you hear. Keep them consistent when comparing recordings.

AudioQuest

The DragonFly Cobalt is a compact USB DAC/amplifier for a desk setup that changes regularly.

  • AudioQuest lists computer compatibility and an included USB-C adaptor.
  • Its stated support for up to 24-bit/96kHz doesn’t, by itself, tell you whether you’ll hear a difference with your headphones.

Focusrite

The Scarlett 2i2 4th Gen is an option if your playback setup also needs analogue recording inputs.

  • The manual lists microphone and line inputs, a 6,35mm headphone output and direct monitoring.
  • If you only play existing files, you may not need the recording features.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I need a separate DAC amplifier if my headphones already work with my computer?

Not necessarily. First check whether your existing output provides a usable volume and the connection you need with your headphones. Only add equipment if there’s a specific feature you’re missing.

How do I connect a DAC before comparing recordings?

Use the input and headphone output on the exact model you have, select that output on your computer and start at a low volume. For the ZEN DAC 3, iFi audio recommends turning the volume down before changing the gain.

Which settings should I keep the same between listening sessions?

At the very least, use the same headphones and listening volume, and check any equaliser, crossfeed or bass settings. The RME ADI-2 DAC FS and iFi ZEN DAC 3 have adjustable processing features; changing the settings makes the comparison less like-for-like.

Which power supply do I need, and what about the warranty?

FiiO lists DC 12 V/2 A for the K11; the iFi ZEN DAC 3 manual describes USB power. Check which accessories are included with each offer. According to the Dutch government, statutory rights in the Netherlands include a legal guarantee with no fixed statutory time limit; a manufacturer’s warranty does not replace it.

Which Dutch rules are relevant to listening at the office and shopping online?

The Arboportaal outlines employers’ responsibilities regarding harmful noise exposure at work; exposure limits are not a recommended setting for a DAC’s volume control. The World Health Organization also highlights the importance of both volume and listening time. For an online consumer purchase from a business, the Dutch government says you usually have 14 days to change your mind, although exceptions may apply.