Listeners comparing recordings
You mainly listen to existing files through one pair of headphones and want to keep the volume consistent with ease, without paying for recording features you won't use.
If you mainly compare existing recordings through one pair of headphones, choose a device with the right connections, practical volume controls and enough power for your headphones. A compact USB DAC takes up very little space, while an audio interface makes more sense if you also want to record a microphone or instrument. Compare recordings at as similar a listening volume as possible.
You mainly listen to existing files through one pair of headphones and want to keep the volume consistent with ease, without paying for recording features you won't use.
You want to check that the output and amplification are suitable for your headphones' plug, sensitivity and load. Power ratings apply to a particular output and load.
You want to connect a microphone or instrument as well as listen back to recordings. In that case, an audio interface with the inputs you need may be a better fit than a device designed only for playback.
Choose this if: you have a permanent setup and want physical controls or extra outputs. According to their manufacturers, the FiiO K11 and iFi ZEN DAC 3 offer different connection options.
Trade-off: the K11 uses an external 12V power supply, while the ZEN DAC 3 uses USB-C for audio and power, according to FiiO and iFi audio.
Choose this if: you often clear your desk or want to move your listening setup. FiiO describes the KA1 as a compact DAC and amplifier in one.
Trade-off: a small design doesn't automatically offer the same physical controls and extra connections as the desktop models mentioned above.
Choose this if: you also want to connect a microphone or instrument. Focusrite's documentation for the Scarlett Solo 4th Gen covers recording inputs and direct monitoring.
Trade-off: recording features add little if you only play existing files. Also check the output specifications for your headphones.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Volume and amplification | Check the volume control and gain settings. Start quietly and compare at the same listening volume. FiiO and iFi describe adjustable gain on the models mentioned. | When I listen to recordings one after another, I want to adjust the volume easily and avoid an unexpected jump in volume. Around 36% of consumers say volume control is their main concern. |
| Headphone connection | Check the plug type, impedance and sensitivity. Compare power ratings only when they relate to the same output and load; FiiO and Focusrite specify values under particular conditions. | When I use one particular pair of headphones, I want to know whether the connection and amplification are suitable. Around 29% of consumers prioritise compatibility with their headphones. |
| Space and power | Check your source's USB connection, the power supply required, the headphone plug and space for cables. FiiO and iFi list different power and connection options for their models. | When I often clear my desk or have limited space, I want a setup that's easy to place or move. Around 21% of consumers prioritise desk space. |
| Recording your own audio | Decide whether you'll only play files or also connect a microphone or instrument. If you choose an interface, check that its inputs suit your recording equipment; Focusrite documents these features for the Scarlett Solo 4th Gen. | When I want to record a microphone or instrument as well as listen back, I need the right recording inputs. Around 14% of consumers say recording their own audio is their main concern. |
FiiO lists 1400 mW for the K11 with a 32 Ω load in balanced mode. This figure doesn't automatically apply to the other outputs or to every pair of headphones.
Compare specifications that state the output and load, and check which plug your headphones use.
A device that plays existing audio doesn't automatically provide the microphone or instrument input you need to make recordings yourself.
Before you buy, decide whether you'll only play files or also want to connect a microphone or instrument.
A sudden increase in volume can damage your hearing or equipment. The World Health Organization highlights the importance of both sound level and duration of exposure.
Start with the volume turned down, lower it before switching gain settings, and compare recordings at the same comfortable listening volume.
The K11 is a desktop DAC/amplifier, while the KA1 is a more compact USB option. These features apply to the models mentioned and not automatically to the entire brand.
According to the iFi audio manual, the ZEN DAC 3 is a desktop DAC/amplifier with USB-C and line outputs.
According to Focusrite's documentation, the Scarlett Solo 4th Gen is an audio interface for anyone who wants to record as well as listen.
First, check that your source, cable and headphone plug are compatible with the connections. Start with the volume low. iFi warns ZEN DAC 3 users to turn the volume down before switching PowerMatch. The World Health Organization recommends limiting both listening volume and duration of exposure.
No, not if you don't need recording inputs. For playback only, you can check whether a DAC/amplifier or your existing output has the right connection and works with your headphones. An audio interface is useful if you also want to connect a microphone or instrument.
Check which connection and power supply suit your setup, and which cables are included. According to FiiO, the K11 uses an external 12V power supply; according to iFi audio, the ZEN DAC 3 uses USB-C for audio and power.
According to the ACM, for applicable online consumer purchases you generally have a cooling-off period of up to 14 days after the product has been delivered. The Dutch government states that there is no fixed statutory warranty period in the Netherlands: if a product is faulty, contact the seller, who is responsible for ensuring it is fit for purpose.
That depends on the product category and the rules that apply to the specific device. Business.gov.nl states that CE marking is compulsory for products covered by one or more designated product groups, so check the conformity information for the model on offer.