Who is this for?

Dedicated home listener

You regularly compare recordings on one computer and want a suitable wired connection, straightforward controls and enough power for your existing headphones. The FiiO K7 and iFi ZEN DAC 3 are examples of models with different connection options.

Listener with multiple sources

You want to connect another wired source as well as your computer via USB. Check the inputs on the exact model you’re considering: according to their manufacturers, the FiiO K7 and iFi ZEN DAC 3 offer different input options.

Listener with sensitive in-ear headphones

You switch between in-ear headphones and regular headphones, so you’ll want to consider the output options, gain and how precisely you can adjust the volume. RME lists a dedicated IEM output for the ADI-2 DAC FS.

What should you look for?

What to consider What should you check? Who is this important for?
Power and volume Only compare power ratings when the headphone load is suitable and comparable, and check the gain and volume controls. If I want to drive my headphones comfortably without big jumps in volume, suitable power is my top priority; around 36% of consumers choose this as their main consideration.
Connections Make a note of the USB, optical, coaxial or analogue sources you use, and check that the connection matches your headphone cable. If I want to use several wired sources or keep using my current headphone cable, the connections need to suit them; around 29% of consumers give this top priority.
Consistent comparisons Keep your headphones, listening volume, gain and EQ or bass settings the same when comparing recordings. If I want to assess recordings under consistent, comfortable listening conditions, I focus on settings that could affect the comparison; around 21% of consumers put this first.
Use outside the home office Check that the USB source is compatible and that the chosen mode receives enough power. If I want to take the same wired listening setup with me to use with a laptop or phone, portability matters; around 14% of consumers choose mobility as their main consideration.

Common buying mistakes

  • Treating a high wattage figure as a general measure of sound quality

    FiiO states the K7’s output power for each output, load and distortion condition. The figures can’t be compared fairly without taking that context into account.

    Compare the figures for the output and load that suit your headphones, and consider the volume controls too.

  • Leaving sound-processing features switched on without realising

    The iFi ZEN DAC 3 has switchable XBass+ and PowerMatch, while the RME ADI-2 DAC FS has EQ. Changing these settings can affect the conditions of a recording comparison.

    For each comparison, use the same headphones and keep the volume, gain and sound-processing settings the same.

  • Using a random adapter with a balanced output

    Topping specifically warns against using adapter cables to connect balanced outputs to single-ended headphone connections on the DX5 II.

    Before you buy, check that your cable matches the output and follow the connection instructions for the exact model.

    You may need a suitable cable for your headphones.

  • Assuming every USB port can provide portable peak power

    According to FiiO, the QX13’s desktop mode switches off automatically if the USB port doesn’t provide enough power.

    Check the power available in your setup and whether you want to use the separate power input.

    Some setups may need a separate power supply.

Brands to consider

FiiO

The K7 is an option for a fixed setup. The QX13 is a portable USB model to consider if you switch between your desk and listening on the go.

  • According to FiiO, the K7 has several wired inputs and two types of headphone output.
  • The QX13’s extra amplification in desktop mode depends on a sufficient power supply; this isn’t a general feature of all FiiO models.

iFi audio

The ZEN DAC 3 is a USB-C DAC/amplifier for a desktop computer setup, with analogue outputs.

  • The manual lists switchable gain and 6.3mm and 4.4mm headphone outputs.
  • The manual also mentions bass enhancement; keep this setting the same when comparing recordings.

RME

The ADI-2 DAC FS is worth considering if you want dedicated amplification for in-ear headphones and a wide range of settings.

  • For this model, RME lists a dedicated IEM output, digital inputs and parametric EQ.
  • These features alone don’t prove that you’ll assess a recording more accurately.

Topping

The DX5 II is a desktop DAC/amplifier to consider if you want a range of outputs and adjustable processing.

  • The Dutch product information lists several outputs and PEQ for the DX5 II.
  • Topping warns against unsuitable adapter cables between balanced and single-ended outputs, and against distortion caused by setting the PEQ preamp too high.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need a separate DAC headphone amplifier for every pair of headphones?

Not necessarily. First, check your headphones’ connection and specifications, then compare them with the output specifications for the relevant load. A higher stated maximum power doesn’t, by itself, prove that you’ll have an advantage when comparing recordings.

What should I check if I can’t hear anything over USB?

Check that your source is connected to the intended USB input, that you’ve selected the right input and output, and that the volume is set correctly on both your computer and the device. Topping lists these checks in its model-specific support for the DX5 II; for other models, consult the relevant manual.

How can I stop settings from affecting my recording comparisons?

Use the same headphones for both recordings and keep the volume, gain and any EQ or bass enhancement the same. That way, you won’t inadvertently change several listening settings at once.

What returns period and warranty apply when buying from a Dutch online shop?

For an eligible online consumer purchase, you’ll generally have a 14-day cooling-off period; the Dutch government lists some exceptions. There’s no fixed term for the statutory guarantee in the Netherlands: if a product is faulty, contact the seller. A manufacturer’s warranty may also apply.

Does a DAC headphone amplifier need a CE mark?

That depends on the product legislation that applies to the specific version. For equipment covered by Directive 2014/30/EU, the consolidated directive requires CE marking; the applicable requirements must be assessed for each device. Check the documentation for the exact model and the power supply supplied with it. A CE mark is not an independent test report.