Who is this relevant for?

Listener with a regular pair of headphones

You want to assess concert recordings using your wired headphones. Start by checking that the output is suitable, that there’s enough amplification, and that the volume control works for the way you listen.

Listener who checks file formats

You compare recordings on a computer and want to know which digital inputs and file formats the DAC you choose actually supports.

Listener with several devices on their desk

You may also want to connect active speakers, or need a microphone or instrument input for your own recordings. First, work out which connections you’ll actually use.

What should you consider when choosing?

USB DAC for one computer

A good fit if: you mainly listen to files from one computer using wired headphones.

Bear in mind: available inputs and outputs vary by model; a USB connection doesn’t automatically mean there’s also an optical input.

Desktop DAC with multiple inputs

A good fit if: you want to connect an optical or coaxial source as well as USB.

Bear in mind: check the connector for each output and the conditions under which its rated power applies.

Audio interface for recording

A good fit if: as well as listening, you want to connect a microphone or instrument to make your own recordings.

Bear in mind: recording inputs may be unnecessary if you only play downloaded files.

What to consider What should you check? Who is it for?
Connecting and driving headphones Check your headphone connection, and compare power ratings only when the load and output are specified too. The 1400 mW FiiO quotes for the K11 applies at 32 Ω via the balanced output. When using my existing wired headphones, I want to know whether the plug fits and whether the volume control is practical. Consumers who prioritise headphone compatibility account for around 36% of consumers in this breakdown of preferences.
Computer and file formats Check which formats your files use and which sample rates the chosen input supports. USB, optical and coaxial inputs may support different formats and rates. When comparing concert files on my computer, I want to know that the chosen input supports them. Consumers who prioritise file and computer compatibility account for around 29% of consumers in this breakdown of preferences.
Volume when listening repeatedly Check the volume control and any gain settings. The WHO points out that both sound level and duration of exposure matter. When listening to the same sections repeatedly, I want to keep the volume manageable and avoid accidentally listening too loudly. Consumers who prioritise controlled listening account for around 21% of consumers in this breakdown of preferences.
Speakers or your own recordings Check whether the model has the line output or microphone and instrument input you need. For speakers, also check whether the output is fixed or variable. When I want to connect speakers or make my own recordings at the same desk, I check which extra connections I’ll need. Consumers who prioritise these desk connections account for around 14% of consumers in this breakdown of preferences.

Things to check before buying

  • The maximum power rating won’t necessarily apply to every output

    FiiO specifies 1400 mW for the K11 at a load of 32 Ω via the balanced output. On its own, that figure doesn’t tell you how much power is available from another output or with a different pair of headphones.

    Compare power ratings alongside the load, output and measurement conditions. Also check that your headphone plug fits.

  • A high resolution rating doesn’t automatically mean better assessment

    Support can vary between inputs. Audioengine states that, for the D1 version reviewed, USB signals above 96 kHz are resampled to 96 kHz.

    Check the formats and sample rates used by your files, and look at the specifications for the input you plan to use.

  • Similar model names can refer to different versions

    The external list names the Audioengine D1 without specifying the full version. The Topping DX1 and DX1 II are separate model identities, so don’t assume they have the same connections or specifications based on the name alone.

    Before buying, check the full model name and the specifications of the version you’re considering.

Brands to consider

FiiO

The K11 and K7 are desktop DAC/amplifiers for anyone looking for multiple digital inputs and different headphone connections.

  • FiiO specifies USB, optical and coaxial inputs, three gain settings, and 6.35 and 4.4 mm outputs for the K11.
  • The K11’s rated 1400 mW applies at 32 Ω via the balanced output. Don’t compare this directly with other outputs or the K7’s specifications.

iFi audio

The ZEN DAC 3 is a USB-focused desktop unit for headphones and, optionally, active speakers.

  • The manual lists USB-C, switchable gain, 6.35 and 4.4 mm headphone outputs, and fixed or variable analogue outputs.
  • If you want to connect an optical source, the listed USB-C input alone won’t be enough.

Topping

The DX1 combines a DAC and headphone amplifier. Note that the DX1 and DX1 II are different model names.

  • The official product page identifies the DX1 as a model in the DX range.
  • Check the specific connections and specifications for the version you’re considering.

Fosi Audio

According to Fosi, the K5 Pro combines a DAC and headphone amplifier with bass and treble controls.

  • Fosi lists USB-C, optical and coaxial inputs, a 3.5 mm headphone output and an RCA output.
  • Check the sample rate specifications for the input and version you want to use.

Audioengine

The D1 32-bit version reviewed is a USB-powered DAC/amplifier with USB-C and an optical input. The external list only names the D1, without specifying the full version.

  • Audioengine specifies a 3.5 mm headphone output and RCA outputs for the D1 32-bit.
  • According to Audioengine, USB signals at 188.2 and 192 kHz are resampled to 96 kHz; optical is specified as supporting up to 192 kHz natively. Check that this is the version you’re considering.

Focusrite

The Scarlett Solo 4th Gen is worth considering if you want to record using a microphone or instrument as well as play audio.

  • The official manual lists recording inputs, USB-C and a separate headphone control.
  • Focusrite specifies 32 mW at 33 Ω and 22 mW at 300 Ω for the headphone output. Recording features don’t automatically make this model a better choice if you only want to listen.

Joybuy products

Related products coming soon.

Frequently asked questions

How do I connect a DAC to listen to downloaded concert recordings?

Connect your computer to a digital input supported by the model you’ve chosen, then plug your wired headphones into the matching output. Start at a low volume and check format support for each input; the FiiO K11 has different maximum specifications for USB, coaxial and optical.

Do I need special software for a headphone DAC?

It depends on the model, your operating system and the playback mode you want. FiiO says the K11 supports driverless operation from Windows 10 onwards; check the instructions for your computer. Turn the volume down when changing headphones or gain settings.

What are my rights when buying online in the Netherlands?

When you buy from a business online as a consumer, you generally have 14 days to change your mind, although exceptions and the type of seller matter. According to the Dutch government, if a product is faulty, the seller is your point of contact for the statutory guarantee. The Netherlands does not have one fixed statutory guarantee period for every product.

Can I listen to downloaded concert recordings at home?

A DAC doesn’t change the rights associated with a recording. The Dutch government states that downloading from an illegal source is prohibited. Check the source and usage rights of the specific recording.

Does a CE mark alone prove that this DAC is safe?

According to the European Commission, a CE mark is the manufacturer’s declaration that the product meets the applicable requirements. For a specific listing, check the version and accompanying documentation. The mark is the manufacturer’s declaration, not an independent product test.