Who is this buying guide for?

Listener with limited desk space

You play your own music files from a computer and want as little extra equipment and as few cables as possible next to your headphones.

Listener with more demanding headphones

You want to check whether your current output is sufficient, then compare the connections and stated output power for your headphones.

Listener with multiple audio sources

You may want to connect an optical source or active speakers as well as USB, and have room for a desktop model.

What should you look for when buying?

First check that the DAC works with your music source. Then compare the space it needs, the headphone connection and any speaker connections.

What to consider What should you check? Who is this important for?
Connection to your music source Check which digital output your computer or other source has, whether the DAC has the matching input and whether a driver is needed. If I play music from my computer, I first want to know whether the source and DAC connect directly. Around 36% of consumers put source compatibility first.
Space and power supply Compare the dimensions, the space needed for plugs and cables, and whether the model requires a separate power supply. On a small desk, I want to leave room for my other things and cables. Around 29% of consumers prioritise space requirements and power supply.
Driving your headphones Check that the output matches your headphone plug, and compare power only for the same output and a relevant load. With my wired headphones, I want to assess whether the connections and specifications suit the way I use them. Around 21% of consumers start by considering how their headphones will be driven.
Headphones and speakers Check whether there are RCA outputs that work with your active speakers, and whether the output is fixed or variable. If I switch between headphones and active speakers, I want to know in advance how to connect both and where to adjust the volume. Around 14% of consumers prioritise this combination.

Buying pitfalls

  • Comparing the highest power figure without checking the measurement conditions

    Stated figures can vary by output, even at the same load. So a single power figure doesn’t necessarily tell you what to expect from the output you plan to use with your headphones.

    Compare the output, load and measurement conditions given with the specification, and check which plug your headphones have. FiiO lists different figures for the K11’s 6.35mm and 4.4mm outputs at 32 Ω.

  • Choosing a USB DAC without checking your source’s output

    A USB input won’t necessarily work with a source that has only an optical digital output. The iFi ZEN DAC 3 manual lists USB-C as a digital input; the FiiO K11 and Audioengine D1 also specify optical inputs.

    Check the digital output on the device you use to play your music files and compare it with the inputs on the exact DAC model.

    If the connections aren’t compatible, you may need a suitable converter or a different DAC model.

  • Assuming the manufacturer’s warranty is the full statutory warranty

    According to the Government of the Netherlands, there is no fixed statutory warranty period in the Netherlands. The seller is responsible for providing a solution if a product is faulty.

    Check any additional warranty terms separately and keep your proof of purchase.

Brands to compare

FiiO

FiiO offers both desktop models with multiple digital inputs and compact USB dongles.

  • According to FiiO, the K11 has 6.35mm and 4.4mm headphone outputs and an RCA line output.
  • The K11 requires a 12V/2A power supply. The stated maximum of 550 mW for the KA13 applies to the balanced output in desktop mode, not to every output or setting.

iFi audio

The uno is a compact USB option; the ZEN DAC 3 offers more headphone outputs and adjustable analogue outputs.

  • The uno manual lists a 3.5mm headphone output and states that a driver is required for use with a PC. The ZEN DAC 3 manual lists 6.35mm and 4.4mm outputs, as well as RCA and 4.4mm outputs with fixed or variable volume control.
  • The ZEN DAC 3 manual consulted does not list an optical input. Check that it matches your source’s digital output.

Audioengine

The D1 combines USB and optical digital connections in a compact case, with a headphone output and RCA outputs.

  • Audioengine specifies USB power, a 3.5mm headphone output and dimensions of 8.9 × 9.5 × 2.5 cm.
  • Audioengine lists a maximum native sample rate of 96 kHz over USB. Don’t assume that higher stated figures apply to native USB playback.

Joybuy products

Related products coming soon.

Frequently asked questions

Does a local music file need to have a particular resolution for these DACs?

No. First choose a DAC with a connection that suits your playback device. Maximum sample rates are model specifications; they don’t mean that a lower-resolution file will sound better. Audioengine lists native USB playback up to 96 kHz and native optical playback up to 192 kHz for the D1.

How do I connect everything without a sudden loud sound?

Connect the digital source and compatible headphones, then start with the volume low. iFi recommends turning the volume down before changing PowerMatch on the ZEN DAC 3. The World Health Organization recommends limiting sound levels and listening time for safe listening.

Do I need a separate power supply?

It depends on the model: FiiO specifies a 12V/2A DC power supply for the K11, while the iFi uno is powered via USB-C. According to the iFi manual, the ZEN DAC 3 can be powered via USB or with a separate 5V power supply; the separate power supply is not included.

What warranty and cooling-off period apply to an online purchase in the Netherlands?

For a consumer purchase, contact the seller if a product is faulty; the Government of the Netherlands states that there is no fixed statutory warranty period. In many cases, online purchases from a business come with a 14-day cooling-off period. Check the applicable terms and exceptions before you buy.

Is the CE mark a quality mark for sound?

No. The CE mark is not an assessment of sound quality or suitability for your headphones. According to the European Commission, it indicates that the manufacturer declares the product complies with the relevant EU product rules; which rules apply depends on the product.