If you play digital files from a computer and don’t already have a suitable DAC, a compact DAC and headphone amp combination is usually the simplest choice. If you already have a DAC or another source with a suitable analogue output, a separate amplifier may be all you need. In either case, check the input you’ll use, the headphone connection, the power available at your headphones’ impedance and the space needed for the unit, cables and power supply.
Who is this buying guide for?
Computer listener without a separate DAC
You play hi-res files from a computer and want digital-to-analogue conversion and a wired headphone output in a single desktop unit. FiiO and iFi audio product information includes examples of these combinations.
Listener with headphones that need careful driving
You check your own headphones’ connection, sensitivity and power requirements, rather than focusing only on the highest stated sample rate. Kieskeurig highlights output power and headphone impedance as things to consider.
Listener with multiple sources
You might want to connect USB and an optical or coaxial source, so you’ll need to consider the inputs, power supply and space for cables. Models from brands including FiiO and Fosi Audio have multiple wired digital inputs.
What should you look for when choosing?
Start with the signal chain: check whether your source already has a DAC and an analogue output, then make sure the chosen connection and unit will suit your headphones and desk.
| What to consider |
What to look for when buying |
Who is this important for? |
| Headphone compatibility |
Compare the plug type, impedance and sensitivity with the output and the stated power at the specified load. Start at a low volume. |
If I want to avoid choosing an output or volume range that doesn’t suit my headphones, I check the connection and how they’re driven. Around 31% of consumers say headphone compatibility is their top priority. |
| Files and digital source |
Make a note of your files’ format and resolution, and check that the exact input and playback route you use support them. |
If I want to play hi-res files from a particular source, I check that the specific connection can handle them. Around 25% of consumers prioritise source and file compatibility. |
| Space and cabling |
Measure the available space, including room behind the connections, and check the exact model’s dimensions and power requirements. |
If I have limited desk space, I also want to leave room for plugs, the headphone cable and any separate power supply. Around 25% of consumers make limited desk space their top priority when choosing. |
| Ease of use and support |
Check which cables and power supply are included with the specific offer, how the volume control works and who the seller is. |
If I want a straightforward set-up, I check what’s needed and how to use the device before ordering. Around 19% of consumers prioritise ease of purchase and use. |
Common buying mistakes
-
Assuming the highest sample rate is supported by every input
The stated maximum values for the FiiO K11 vary by digital input. So a maximum for USB doesn’t automatically apply to the optical or coaxial connection.
Check the specifications for the input you’ll actually use and compare them with your files and playback route.
-
Buying an analogue headphone amplifier as a replacement for a DAC
A fully analogue amplifier, such as the iFi ZEN CAN 3 according to iFi audio, doesn’t convert digital files itself. You’ll also need a suitable DAC or another source with an analogue output.
Map out the signal chain from file and source to headphones before choosing between a combination unit and a separate amplifier.
A separate DAC or another suitable analogue source may also be needed with a standalone amplifier.
-
Confusing a manufacturer’s warranty with your statutory rights
A manufacturer’s warranty doesn’t replace your statutory rights against the seller. The Government of the Netherlands states that there is no fixed statutory warranty period in the Netherlands. What you can expect depends, among other things, on the product and the information provided at the time of sale.
Keep your purchase details and check who the seller is and what any additional manufacturer’s warranty covers.
Brands to consider
FiiO
The K11 is a compact desktop combination for anyone wanting to connect USB and, optionally, optical or coaxial sources.
- FiiO lists 6.35mm and 4.4mm headphone outputs, three gain settings and dimensions of 147 × 133 × 32.3 mm including feet for the K11.
- The stated maximum sample rate varies by digital input. For this model, FiiO specifies a 12 V/2 A DC power supply.
iFi audio
The ZEN DAC 3 is a USB-focused DAC and headphone amplifier; the ZEN CAN 3 is a separate option for anyone who already has a DAC or suitable analogue source.
- The ZEN DAC 3 manual lists USB-C, 6.35mm and 4.4mm headphone outputs, as well as adjustable gain.
- iFi describes the ZEN CAN 3 as fully analogue. This amplifier doesn’t convert digital files on its own.
Fosi Audio
The K5 Pro is a DAC and headphone amplifier with USB, optical and coaxial inputs for a desktop set-up.
- Fosi Audio product information lists tone controls, an RCA output and up to 24-bit/192 kHz for the digital inputs specified.
- Check that support for the input you’ll use and the 3.5mm headphone connection suit your source and headphones.
SMSL
The C200 is a desktop DAC and headphone amplifier for anyone considering wired digital inputs and, optionally, Bluetooth as a separate playback route.
- SMSL lists USB-based PCM and DSD support, and specifies LDAC separately for Bluetooth.
- Don’t assume Bluetooth transmits the same format or resolution as USB; check the specifications for the connection you want to use.
Joybuy products
Related products coming soon.
Frequently asked questions
Do I need a DAC for digital hi-res files, or is an amplifier enough?
There needs to be a digital-to-analogue converter somewhere in the playback chain. A USB DAC with a headphone amplifier combines these functions; a fully analogue amplifier such as the iFi ZEN CAN 3 needs a suitable analogue source or a separate DAC.
Will the highest stated sample rate also work through my optical input?
Not necessarily. FiiO specifies up to 384 kHz/32-bit via USB, 192 kHz/24-bit via coaxial and 96 kHz/24-bit via optical for the K11. Compare the specifications for the input you’ll actually use with your files and playback route.
How can I check whether my headphones are compatible with the amplifier?
Check that the plug fits the output, then compare your headphones’ impedance and sensitivity with the amplifier’s power specifications, including the stated load. Start at a low volume when you first use it and check that the volume control works comfortably for you.
How should I start listening safely with a powerful amplifier?
Start at a low volume, then choose a suitable gain setting. iFi advises setting the volume low before changing PowerMatch on the ZEN DAC 3. The World Health Organization also recommends taking both listening level and duration into account. This usage advice is not a Dutch statutory volume limit.
Who should I contact if there’s a fault, and is there always a two-year statutory period in the Netherlands?
For statutory rights, the seller is your point of contact. According to the Government of the Netherlands, there is no fixed statutory warranty period in the Netherlands: what you can expect from a product depends, among other things, on the product and the information provided at the time of sale. A manufacturer’s warranty is separate from this.