Student with a poor signal at their viewing spot
You attend a live lecture at one spot at the end of the corridor and want to check whether a repeater placed part-way along can still receive a good signal there.
For one viewing spot at the end of a long corridor, a wireless repeater may be enough if it still has a usable connection to the router when placed halfway along. Consumentenbond and KPN recommend positioning it between the router and the viewing spot. If the signal is already weak there, or you want to reduce the risk of interruptions during your live lecture, compare a wired access point, mesh or powerline adapter in the intended position. No advertised Wi-Fi speed guarantees an uninterrupted stream.
You attend a live lecture at one spot at the end of the corridor and want to check whether a repeater placed part-way along can still receive a good signal there.
You can run a cable or try a different setup, and prioritise a reliable connection to the Wi-Fi point over a quick installation.
Other rooms also have poor reception, so you want to weigh up whether one repeater will be enough or whether several connected points would work better.
Start by checking the signal in a possible halfway position. Then decide whether one wireless point, several points or a wired connection is best for your corridor and the rest of your home.
Choose this if: you mainly want to reach one viewing spot and there’s a socket between the router and that spot where the Wi-Fi signal is still usable.
Bear in mind: the repeater still relies on a wireless connection to the router. If reception is poor where you place it, that connection won’t improve by itself.
Choose this if: you want to reach other rooms as well as the corridor, using several points as one network.
Bear in mind: several points require extra equipment and careful positioning. Wireless points also need to be able to reach one another reliably.
Choose this if: you can run a network cable towards the end of the corridor and connect it to your chosen device.
Bear in mind: running the cable and installing the equipment take extra work. Check whether the device has an access point mode and how it’s powered.
Choose this if: running a network cable isn’t practical and you can test a connection over your electrical wiring using the sockets you intend to use.
Bear in mind: performance depends on your electrical wiring, so don’t assume the connection will be more stable without testing it first.
| What to consider | What to look for when buying | Who is this most relevant to? |
|---|---|---|
| Coverage to your viewing spot | Test a socket between the router and your viewing spot. Use a placement indicator or setup app if the model offers one. | If I attend a lecture at the end of the corridor, I want to know whether a point placed part-way along will still maintain a good connection to the router. Around 36% of consumers say coverage to their viewing spot is their top buying priority. |
| Connection during the lecture | Test the live connection at your eventual viewing spot. If needed, compare a wired access point with a wireless setup. | I want to follow my lecture without constantly checking the connection, even if that means more installation work. Around 29% of consumers prioritise a continuous connection during a live lecture. |
| Installation and equipment required | Work out how many points and cables your chosen setup needs, and whether renting equipment from your provider is an option. | If I mainly want to improve Wi-Fi in one viewing spot, I want to keep installation simple and avoid adding more equipment than necessary. Around 21% of consumers prioritise ease of installation and the size of the setup. |
| Compatibility | Check your router model, the requirements for the mesh feature you want, and the Wi-Fi standard supported by your laptop or tablet. | I want to keep using my existing router and viewing device, and know in advance which features work with them. Around 14% of consumers give compatibility top priority. |
A repeater needs a usable connection to the router itself. If you put it somewhere the original Wi-Fi signal has already dropped out, it can only pass on that weak connection.
First, find a socket part-way along and then test the live connection at your viewing spot. Consumentenbond and KPN recommend placing the Wi-Fi point between the router and the area with poor reception.
If one wireless point doesn’t work in the available position, you may need an extra Wi-Fi point or a wired setup.
An advertised Wi-Fi capacity doesn’t tell you how the connection will perform in your corridor. Reception and the connection between the repeater and router also play a part.
Compare the different setup options and test them where you’ll be watching the lecture. Don’t choose based on the Mbps figure alone.
A device may extend Wi-Fi without joining your router’s specific mesh feature. Brand-specific mesh features may require compatible equipment.
Check the exact router model and the requirements for the mesh feature you want before choosing a device.
Choosing an incompatible device may mean you need different networking equipment.
The RE705X range is designed to extend Wi-Fi from an existing router and, according to TP-Link, also offers an access point mode.
The FRITZ!Repeater 1200 AX is a Wi-Fi 6 repeater with mesh features and a gigabit LAN port.
According to NETGEAR, the EAX15 is a Wi-Fi 6 mesh extender designed to expand an existing network.
According to devolo, the WiFi 6 Repeater 3000 can be used as a repeater or an access point.
These products cover a single wireless repeater, mesh with several points, powerline with Wi-Fi and an access point for a wired connection. Before use, check the CE marking and documentation for the exact model.
No image available
A wireless repeater for anyone looking to extend Wi-Fi to one remote viewing spot and able to find a suitable position part-way along.
Supports 2.4 GHz and up to 300 Mbps, with two external antennas. The description mentions setup via the Mi app and a blue indicator light. The advertised speed isn’t a measured result at your viewing spot.
No image available
Extender mode may suit you if you want to extend Wi-Fi. Access point mode is an option if you can run an Ethernet connection to the Wi-Fi point.
The product information lists 2.4 GHz, up to 300 Mbit/s, two antennas, WPS and Passive PoE. A wired Ethernet connection is required to use it as a wired access point.
No image available
A mesh system with two units for a setup with several Wi-Fi points; this isn’t a standalone plug-in repeater.
The product information lists Wi-Fi 7, three WAN/LAN ports per unit, Multi-Link Operation and support for wireless and wired backhaul. These specifications don’t guarantee reception in a particular spot in your corridor.
No image available
A powerline starter kit with Wi-Fi for anyone wanting to try an alternative to a wireless repeater.
The connection runs through your existing electrical wiring. Performance depends on your electrical installation, so test the kit in the sockets you intend to use.
No image available
A mesh system with three units for several areas of your home; it requires more equipment and setup than one plug-in repeater.
The product information lists Wi-Fi 6, PoE and two Ethernet ports per unit. These features don’t confirm how well the system will reach your eventual viewing spot.
Start somewhere part-way along where the repeater can still receive a good signal from the router. Check the indicator or setup app if the model offers one, then test it at your viewing spot. Don’t automatically place it next to your screen if the Wi-Fi signal has already dropped out there.
No. The Wi-Fi version alone doesn’t tell you how the whole connection will perform where you are, and an older viewing device won’t automatically benefit from Wi-Fi 6. Test the complete setup in the position where you’ll be watching.
Radio equipment placed on the market in the Netherlands must meet European requirements and carry the CE marking. Check the marking and documentation for the exact model. The Dutch Authority for Digital Infrastructure advises against using equipment if the marking is missing or incorrect.
No. When you buy as a consumer in the Netherlands, you have statutory rights in addition to any manufacturer’s warranty. If a product doesn’t perform as you could reasonably expect under normal use, the seller is responsible for providing a suitable solution at no cost. According to ACM ConsuWijzer, there isn’t one fixed warranty period that applies to every product.
According to the Dutch Authority for Digital Infrastructure, you don’t need a licence to use Wi-Fi at home when you use the designated frequencies and comply with the conditions of use. This doesn’t remove the requirements for the equipment itself.