First, check that your internet connection is working well at the router and whether there’s a spot between the router and the loft where the Wi-Fi signal is still strong. For one weak spot, a well-positioned repeater may be enough. If floors or other obstacles also disrupt the connection in between, consider a wired access point or a powerline setup that you’ve tested. A higher advertised Wi-Fi speed doesn’t guarantee faster downloads in the loft.
Who is this advice for?
Audiobook listener with one weak spot in the loft
Primarily wants to finish a download and can place the repeater where it still receives a strong signal from the router. The Consumentenbond advises against automatically placing a Wi-Fi extender in the spot with the weakest signal.
Homeowner with a shielded loft
Finds that floors or other obstacles also limit Wi-Fi in the areas in between. A wired access point or a powerline setup tested at home may then offer an alternative connection route.
Homeowner with several weak rooms
Wants to reach other areas as well as the loft, so needs to consider the number of Wi-Fi points and how they work with the existing router.
What should you look for when choosing?
One wireless repeater
When: if the internet works well at the router and there’s a spot in between where the repeater can still receive the Wi-Fi signal.
Trade-off: the connection to the router still depends on wireless reception and obstacles.
Network cable with an access point
When: if you can run a cable to or near the loft and the wireless signal through the floor isn’t strong enough.
Trade-off: you’ll need to run a cable, and the device must be able to work as an access point or LAN bridge.
Powerline with a Wi-Fi point
When: if running a network cable is difficult and a repeater can’t get a usable wireless connection to the router.
Trade-off: you’ll need compatible adapters and should test how well they work in your home. Devolo describes possible interference with certain powerline setups using VDSL.
Multiple mesh Wi-Fi points
When: if you need Wi-Fi in several parts of your home, not just the loft.
Trade-off: you’ll have more devices and placement decisions than with one repeater; mesh features don’t automatically work with every router.
| What to consider |
What should you check? |
Who is this important for? |
| Usable signal between the router and the loft |
Check the signal in the loft and at possible points in between; look at the signal indicator or setup app. |
If I mainly want to download an audiobook in one spot in the loft, I’ll look for a place where the repeater can still receive the existing Wi-Fi signal. Around 40% of consumers prioritise having a usable signal in that spot. |
| Connection route where there’s significant signal shielding |
Check whether you can run a network cable and whether the device can work as an access point; test powerline at home. |
If floors also limit reception in the areas in between, I want to be able to use another route to the loft. Around 30% of consumers prioritise this connection option. |
| Connection to the existing router |
Check the router, supported mesh features and setup method for the exact model. |
If I want to expand my current setup easily, I’ll check how it connects to my router and what’s required for mesh. Around 20% of consumers prioritise this compatibility. |
| Coverage in several rooms |
Map out the weak spots and work out how many Wi-Fi points and connections you’ll need. |
If other rooms need coverage as well as the loft, I want to know in advance how many points I’ll need. Around 10% of consumers focus mainly on coverage beyond the loft. |
Buying pitfalls
-
Putting the repeater where the signal is weakest
A repeater needs a usable connection to the router, so a socket in the loft isn’t automatically the best place for it.
Try a spot in between and check the signal indicator. If there’s no usable wireless connection there either, look into a wired access point.
-
Assuming the maximum Mbps is the download speed you’ll get in the loft
Distance, ceilings and other obstacles affect Wi-Fi. An advertised radio speed doesn’t measure the connection in your home.
Compare reception at possible locations and check that the setup suits the connection route available to you.
-
Assuming every mesh device works with every router
Mesh features may come with specific requirements. A basic connection to a router isn’t the same as joining a particular mesh system.
Check compatibility between the exact repeater and router, and find out which mesh features are available.
You may need additional compatible networking equipment to use the mesh feature you want.
-
Confusing a standalone repeater with Wi-Fi over the mains
A repeater connects to the router wirelessly; powerline carries the signal over your mains wiring using adapters.
Check what’s included in a powerline kit and test the connection at home, particularly if you have a VDSL connection.
Powerline requires compatible adapters for the router and the area where you want to use Wi-Fi.
Brands to consider
TP-Link
The RE705X is an example of a Wi-Fi 6 repeater with wireless extension and an access point mode via gigabit Ethernet.
- According to TP-Link, the RE705X supports OneMesh when used with a OneMesh router.
- The advertised radio speeds don’t measure download speeds in the loft; also check compatibility with your router.
FRITZ!
The FRITZ!Repeater 1200 AX is a compact repeater with gigabit LAN that can also be used as a Wi-Fi point connected via LAN.
- FRITZ! specifies LAN use with a FRITZ!Box and FRITZ! Mesh compatibility within a suitable FRITZ! network.
- Don’t assume this mesh compatibility applies to another router without checking; the repeater can also be used with other routers.
devolo
The WiFi 6 Repeater 3000 can be used as a repeater or access point; devolo also offers powerline solutions.
- According to devolo, the repeater has gigabit LAN and can form a mesh network with other devolo Wi-Fi products.
- A standalone repeater isn’t a powerline kit. Powerline requires compatible adapters; devolo describes possible VDSL interference with certain setups.
Products for different Wi-Fi setups
These Joybuy products are designed for different ways to get Wi-Fi in your loft: powerline, a wireless repeater, a wired access point and mesh for multiple areas. Before buying, check compatibility with your router and the product information for the exact model.
No image available
TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit
A powerline starter kit with Wi-Fi extension for situations where the wireless connection to the loft isn’t strong enough. How well it works depends on your home’s electrical wiring, so you’ll need to test it at home.
Joybuy
No image available
Wifi Repeater Pro Black
A wireless repeater for extending coverage to one weak spot, provided there’s a place in between where it can still receive the existing Wi-Fi signal. The advertised radio speed doesn’t guarantee download speeds in the loft.
Joybuy
No image available
TP-Link Omada EAP653
An access point for a setup with a network cable running to the loft, where a wireless connection through the floor isn’t strong enough. The product description lists PoE as a power option; this setup requires a wired connection.
Joybuy
No image available
TP-Link TL-WA801N
The product name describes it as both an access point and a Wi-Fi extender. Access point mode is designed for a wired connection; check which mode suits your router and setup.
Joybuy
No image available
TP-Link Deco BE68 2-Pack
A mesh system with two units for extending coverage to several areas of your home. If you only have one weak spot in the loft, a two-unit kit means more equipment than a single repeater.
Joybuy
Frequently asked questions
Should I upgrade to a faster internet package before downloading in the loft?
Not before checking the connection. Compare your internet connection at the router with Wi-Fi reception in the loft. If only the Wi-Fi in the loft is slow, a faster package won’t automatically solve the problem.
Where should I put a wireless repeater?
Place the repeater somewhere it can still receive the existing Wi-Fi signal, and minimise obstacles between the Wi-Fi points. For weak reception at the back of the house, the Consumentenbond recommends placing it closer to the centre; an indicator light or app can help you find the right spot.
Do I need Wi-Fi 6 to download a single audiobook?
Wi-Fi 6 isn’t a separately proven requirement for this download task. The Consumentenbond notes that devices without Wi-Fi 6 won’t benefit from its specific improvements, and that the Wi-Fi version alone doesn’t determine performance.
How can I keep my Wi-Fi extension secure?
Use a strong password and suitable encryption, and keep your router and Wi-Fi devices up to date. These are usage recommendations from the Consumentenbond; they don’t confirm that a specific model meets all legal requirements.
What should I check about CE marking and warranties in the Netherlands?
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry a CE mark. According to the Rijksinspectie Digitale Infrastructuur, the applicable RED 3.3 cybersecurity requirements have applied since 1 August 2025; check the information for the exact model. ACM ConsuWijzer explains that your statutory guarantee depends on how long you can reasonably expect the product to last, rather than a fixed two-year period.