First, test your internet connection with an Ethernet cable at the router and compare it with Wi-Fi in the loft; mesh won’t fix a slow broadband connection. If the Wi-Fi is weak mainly in the loft, choose an extra node that has a good connection to the router or another node: use Ethernet backhaul if you can run a cable, or place it where the wireless signal is strong enough. Choose the number of nodes and router mode to suit your home and existing equipment; you don’t necessarily need Wi-Fi 7 to download an audiobook.
Who is this advice for?
Loft user with weak Wi-Fi
Your internet works by the router, but downloads in the converted loft are slow or keep dropping out. Before buying Wi-Fi nodes, first find out where the signal gets weaker. The Consumers’ Association (Consumentenbond) recommends comparing the connection using a cable with Wi-Fi.
Homeowner with a cable to the loft
You can run an Ethernet cable and want a reliable connection for the Wi-Fi node in the loft. Compare wired mesh with a single wired access point; TP-Link describes Ethernet backhaul as a way to connect mesh units using a cable.
Homeowner keeping their provider’s router
You want to keep using your existing router, so you need to check which network features remain available when a mesh system is in access point mode. TP-Link says that some of Deco’s gateway features are unavailable in this mode.
What should you consider when choosing?
Wireless mesh
Suitable if: you can’t run an Ethernet cable to the loft and an intermediate node can still receive a strong enough Wi-Fi signal.
Trade-off: adding a node won’t automatically fix a weak connection through a floor or ceiling.
Mesh with Ethernet backhaul
Suitable if: you can run an Ethernet cable to a mesh node and want mesh coverage in several areas.
Trade-off: running a cable takes work and may use up an Ethernet port; also check which features remain available in the mode you choose.
Wired access point
Suitable if: coverage is missing in just one area of the loft, and there is—or could be—an Ethernet cable there.
Trade-off: check how the access point and router manage the network, and how devices switch between Wi-Fi points.
The percentages indicate how primary purchasing concerns are distributed in this loft scenario; each consumer is counted under one main priority.
| Purchasing concern |
What to look for |
Who is most concerned about this? |
| Wi-Fi coverage in the loft |
Check the signal in the loft and in potential locations for an intermediate node. Choose the number of nodes to suit the floors in your home and the coverage you actually get. |
If the Wi-Fi drops out upstairs, I want to know where an extra node will still get a good signal. Around 36% of consumers put loft coverage first as their main purchasing concern. |
| Connection between nodes |
Choose between a suitable wireless location and Ethernet backhaul. Check that the system and your existing cabling support that connection. |
If I want to put a wireless node in the loft, it needs to stay connected to the rest of the network. Around 29% of consumers prioritise the connection between nodes. |
| Existing router |
Check whether you want to keep your provider’s router and which features will remain available in access point mode. |
If I want to keep using my current router, I want to know in advance which features the mesh system will still offer. Around 21% of consumers choose mainly based on how well it works with their existing router. |
| Cost and suitable capacity |
Compare the number of nodes you need and the cost of running any cabling with the cost and power consumption of the setup. A newer generation of Wi-Fi doesn’t, by itself, mean better coverage in the loft. |
For downloading an audiobook, I want to work out what problem needs solving first, without paying for unnecessary extra capacity. Around 14% of consumers put suitable capacity and cost first. |
Common buying mistakes
-
Assuming a higher Wi-Fi speed means better coverage in the loft
A higher advertised speed won’t automatically fix a weak signal in the loft. The Consumers’ Association (Consumentenbond) notes that Wi-Fi 7 doesn’t necessarily offer the average user more than Wi-Fi 6.
First, find out where the connection slows down and compare placement options and backhaul before choosing a Wi-Fi generation.
-
Putting a wireless mesh node where the signal is weakest
The extra node needs to receive data from the router or another node. A weak connection where you place it can limit the connection to the loft.
Try an intermediate location first. If you can run an Ethernet cable, compare Ethernet backhaul with a wired access point.
-
Assuming access point mode keeps all router features
TP-Link says that some gateway features are no longer available in the Deco app when Deco is in access point mode.
Decide in advance which device will manage the network and check that the features you need are available in the mode you choose.
-
Choosing a system with extra nodes based on its coverage figure
The number of nodes you need depends on your home and the signal strength where you want to place them. A stated coverage area isn’t a measurement of coverage in your home.
First, identify the problem areas and the number of floors. Also check whether you can add more nodes to the system later.
Relevant brands
TP-Link
The Deco X50 is a Wi-Fi 6 mesh range available in one-, two- and three-node sets. It’s worth considering if you want to compare wireless placement with Ethernet backhaul.
- TP-Link lists three gigabit ports per Deco X50 and optional Ethernet backhaul.
- Stated coverage doesn’t guarantee a signal through the floor of your home. Features may vary between router and access point modes.
FRITZ!
The FRITZ!Mesh Set 1700 is available, among other options, as a three-piece set and can be connected to an existing router via LAN, according to FRITZ!.
- FRITZ! lists three Repeaters 1700, Wi-Fi 7 and the option to connect the set to a router via LAN.
- Not every home needs a set with three nodes; the specifications don’t guarantee a good wireless connection to a loft.
ASUS
The ZenWiFi BD4 is worth considering if wired connections and additional router features matter to you. The range includes versions with one, two and three nodes.
- ASUS specifies two automatically detected 2.5 Gbit/s WAN/LAN ports per device, access point mode and Wi-Fi 7 on 2.4 and 5 GHz.
- These specifications don’t show any measured improvement when downloading an audiobook. Check the exact set and plug type.
Google
Nest Wifi Pro is an expandable Wi-Fi 6E mesh system that, according to Google, can be used with an existing Wi-Fi modem.
- Google highlights its expandability and compatibility with an existing Wi-Fi modem.
- According to Google, Nest Wifi Pro isn’t compatible with earlier Nest Wifi or Google Wifi generations. The stated coverage isn’t a measurement of coverage in your home.
Joybuy products
These Joybuy products are mesh systems for anyone looking to get Wi-Fi coverage in several areas of their home; some models offer wired backhaul and expandable mesh nodes. When buying, check that the version actually supplied carries the required CE marking: the Dutch Authority for Digital Infrastructure says it must be displayed on the equipment.
No image available
TP-Link Deco BE68, 2-pack
Suitable if you want to use mesh nodes in several areas and are considering wired or wireless backhaul.
Tri-band Wi-Fi 7; 10, 2.5 and 1 Gbit/s WAN/LAN ports per unit.
View product
No image available
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack
Suitable if you’re considering a two-node mesh setup with a wired connection between nodes.
Wi-Fi 6; the product description mentions Ethernet backhaul.
View product
No image available
TP-Link Deco X50 Wi-Fi 6, 3-pack
Suitable if you want to use three mesh nodes and are considering wired backhaul.
Wi-Fi 6; three gigabit ports per unit and optional Ethernet backhaul.
View product
No image available
Linksys Velop Pro 7
Suitable if you want to extend mesh coverage with extra Velop Pro 7 nodes or compatible Linksys mesh devices.
Tri-band Wi-Fi 7 on 2.4, 5 and 6 GHz.
View product
No image available
TP-Link Deco X50-PoE, 2-pack
Suitable if you want to use two mesh nodes and Power over Ethernet (PoE).
Wi-Fi 6; two Ethernet ports per unit and PoE support.
View product
Frequently asked questions
Should I upgrade my broadband package if an audiobook downloads slowly in the loft?
Not before testing the connection. Compare the speed on a computer connected to your home network with an Ethernet cable with the Wi-Fi speed in the loft. If the wired connection itself is repeatedly slow, contact your provider to investigate before buying mesh equipment.
Where should I put a wireless mesh node?
Don’t automatically put it where reception is worst: the node also needs to stay connected to the previous one. Try a suitable intermediate location, then check the signal in the loft again; the number of nodes you need varies from home to home.
Will a mesh system work with my existing provider’s router?
It depends on the system and the features you want to keep. TP-Link says Deco can work behind an existing router in access point mode, but some gateway features are then unavailable in the Deco app. Check the instructions for the exact model before changing any settings.
Does Wi-Fi equipment in the Netherlands need a CE marking?
The relevant product requirements apply to this equipment, and the correct CE marking must be displayed on the device. The Dutch Authority for Digital Infrastructure says that a marking shown on different packaging or a different version doesn’t prove that the version actually supplied carries that marking.
Who should I contact if my mesh system is faulty?
In the Netherlands, the retailer is responsible for the statutory guarantee if a product is faulty, according to the Netherlands Authority for Consumers and Markets (Autoriteit Consument & Markt). Any manufacturer’s guarantee is in addition to this, not a replacement; check the terms before paying for extra cover.