Who is this choice relevant to?

Voiceover artist with a small mixing desk

Wants to fit two speakers around their listening position without making the screen and desk unusable. Size, stands and positioning are therefore key; ADAM Audio and Genelec publish dimensions for their models.

Creator mixing voice and music

Wants to assess the recorded voiceover and any accompanying music using a suitable stereo connection, without mistaking the manufacturer’s specifications for a listening test in their own room.

Presenter with a live microphone

Wants to avoid the monitor signal being picked up by the microphone again while speaking. This calls for a different approach from mixing after the recording session.

What should you look for in compact studio monitors?

First, measure the space for both speakers and your listening position. Then check the connections and whether you’re buying a pair or a single monitor.

What to consider What to look for when buying Who is this important for?
Space and positioning Measure the available width and depth on both the left and right, including stands and cables. Decide where you’ll sit and angle both speakers towards that position. If I need to place two speakers next to my screen, I want to know whether they’ll both fit properly. Around 36% of consumers put space and positioning first.
Assessing voice and music Only compare frequency limits when the measurement levels also match. If necessary, check important bass details on a second, familiar playback system. I want to hear how the voice and any accompanying music sound together from my listening position. Around 29% of consumers give this the highest priority.
Connections and what’s in the box Check your source’s outputs, the compatible inputs and how many speakers are included in the box. To avoid connection or packaging surprises, I want to know in advance whether my equipment is compatible and whether I’m buying a complete stereo pair. This is a priority for around 21% of consumers.
Using a live microphone Decide whether you need to listen through speakers while speaking or only after recording. Test the microphone and speaker setup at the location. If my microphone is on while I’m monitoring, I want to avoid speaker sound being picked up again. Around 14% of consumers say this is their main concern.

Common buying mistakes

  • Mistaking a single monitor for a stereo pair

    The Genelec 8010A is sold individually, while the Yamaha HS3 is specified as a pair. This could mean you end up with something different from what you expected if you need stereo playback.

    Compare listings by the number of speakers and the connections you need, not just by model name.

    For stereo, you’ll need two Genelec 8010A monitors and suitable connections.

  • Comparing frequency limits without checking the measurement level

    Yamaha lists different lower limits for the HS3 at −3 dB and −10 dB. These figures aren’t directly comparable if the measurement definitions differ. Positioning and the room also affect what you hear from your listening position.

    Only compare specifications defined in the same way, and check important bass details on a playback system you know well.

  • Choosing a compact cabinet without measuring both positions

    A small size doesn’t guarantee that both speakers will fit neatly and sit symmetrically. Genelec notes that asymmetry and reflections can affect stereo imaging.

    Map out the positions of both speakers, the screen and your seat before choosing. Also check which stands are included.

  • Assuming studio monitors are suitable with a live microphone

    If speaker sound is picked up by the microphone again, it can create a feedback loop. Shure describes this as sound being amplified through the microphone and coming out of a speaker again.

    Test the microphone and speaker setup at the location, and consider whether listening through suitable headphones would be a better fit for the session.

Brands to consider

ADAM Audio

The D3V is a compact active desktop system for anyone who needs USB-C playback or balanced TRS inputs.

  • ADAM Audio lists two speakers, detachable stands and a 2-metre connecting cable. Each speaker measures 200 × 115 × 150 mm; with the stand, the height is 240 mm.
  • Check that the cable length and dimensions will work with your desk. Statements about sound quality are manufacturer claims, not independent comparisons.

Yamaha

The HS3 is a compact studio monitor pair for setups with compatible analogue outputs.

  • Yamaha specifies XLR/TRS combo, RCA and stereo mini-jack inputs. Each speaker is 132 mm wide.
  • The stated lower limit varies with the measurement level: 85 Hz at −3 dB and 70 Hz at −10 dB. These are specifications, not measurements taken in your room.

PreSonus

The Eris 3.5 2nd Gen is an analogue desktop system sold as a pair.

  • PreSonus lists balanced TRS, RCA and stereo mini-jack inputs, tone controls and a headphone output.
  • Check that the inputs are compatible with your computer or audio interface outputs. Sound quality descriptions come from the manufacturer.

Genelec

The 8010A is a small active monitor sold individually, for use with a source that has compatible XLR outputs.

  • Genelec specifies dimensions of 195 × 121 × 115 mm with the Iso-Pod, and one analogue XLR input.
  • The box contains one monitor; you’ll need two for stereo. Claims about accuracy come from Genelec.

KRK

The GoAux 3 is a portable active stereo system for anyone who also works away from their regular mixing position.

  • KRK lists a pair with a carry case, adjustable stands, RCA and 3.5 mm aux inputs, Bluetooth and a headphone output that mutes the speakers.
  • Check that the analogue connection is compatible with your mixing source. You’ll need to assess the acoustics again at each new workspace.

Joybuy products for this use

Related products coming soon.

Frequently asked questions

How should you position two monitors on a small desk?

Position them as symmetrically as possible, at the same height and angled towards your listening position. For stereo, Genelec recommends an equilateral triangle, ideally with a 60° angle between the speakers as seen from the listener. See what’s practical in your room.

Can you leave the speakers on while speaking into a live microphone?

This can cause feedback if the sound being played comes back into the microphone. Shure explains how this kind of feedback loop occurs. Test the positioning and volume in advance, and consider whether listening quietly through suitable headphones would be a better option.

Does a two-year manufacturer’s warranty cover your full statutory rights in the Netherlands?

No. A fixed statutory warranty period doesn’t fully determine what you can expect from a product. The Dutch government says this depends, among other things, on the product and normal use. If a product is faulty, contact the seller.

Do you have a cooling-off period when buying online?

For eligible distance purchases from a business, you generally have 14 days to change your mind, according to the Dutch government. Check the terms for your specific purchase, as the same rules don’t apply to every purchase.