Who are compact studio monitors suitable for?

Mixers who want to assess kick and bass

You’re mixing a dance track and want to hear how the kick and bass sit together. Bear in mind both the measurement definition used for the stated low-frequency range and the effect of your room.

Producers with a small desk

You have limited space for two monitors, but still want to position them correctly around your listening position. So look beyond their dimensions to consider placement and connections, too.

Beginners looking for a complete set

You want to know in advance whether you’ll receive a pair or a single monitor, and which cables or other equipment you’ll need to connect your mixing setup.

What should you look for when choosing?

Start by checking there’s room for both monitors and that they’ll connect to your source. Then compare the stated low-frequency range using the same measurement definition, and consider your own listening position.

What to consider What should you check? Who is this important for?
Assessing kick and bass Only compare frequency limits measured using the same dB definition, and check that the placement will work in your room. If I want to assess kick and bass properly, I need to know exactly what the specification means and how my listening position affects the sound. Around 36% of consumers put bass monitoring first.
Room for two monitors Measure the space for both speakers and check whether you can angle them towards your listening position. Also check whether feet or stands are included. If I have limited desk space, a pair needs to fit without compromising stereo positioning. Around 29% of consumers prioritise how easily monitors fit on a desk.
Connecting to your setup Compare the outputs on your computer or interface with the inputs on the exact model. For timing-sensitive work, choose a wired connection. I want to use my existing computer or audio interface without needing an unsuitable connection. Around 21% of consumers put connectivity first when choosing.
A complete stereo pair Check whether the offer includes one monitor or a pair, and which cables you’ll need for two channels. If I want to set up stereo straight away, it needs to be clear what’s included and what else I’ll need. Around 14% of consumers prioritise getting a complete stereo pair.

Common pitfalls

  • Comparing Hz figures without checking the dB definition

    Manufacturers may state frequency limits at different dB levels. Your room also affects what you hear at your listening position, so one figure on its own doesn’t give you the full picture of the bass response.

    For each model, note the frequency and its corresponding dB definition. Then consider whether the placement and any available settings are suitable for your room.

  • Mistaking a single monitor for a stereo pair

    The Genelec 8010A is a single monitor, while Yamaha lists the HS4 as a pair. So whether you’ll have two channels straight away depends on what’s included in the offer.

    Before choosing, check whether you’ll receive one monitor or a pair, and which connection cables your setup needs.

    For stereo, you’ll need two separately sold 8010A monitors; you may also need suitable cables.

  • Expecting placement controls to fix room problems

    Reflections and room resonances can change what you hear at your listening position. Placement settings don’t prove that these effects will disappear.

    Start with the most symmetrical setup you can, then see whether the model’s settings help. Genelec Support notes that placing monitors close to walls or other boundaries can increase low-frequency output.

Brands and models to consider

ADAM Audio

The D3V is a compact desktop set with USB-C and balanced TRS inputs.

  • ADAM Audio lists placement switches and detachable stands. Bax Music Netherlands describes the D3V as a two-piece set.
  • The stated 45 Hz applies at −6 dB. That figure alone doesn’t tell you how the deepest bass will sound in a particular room.

Kali Audio

Kali positions the LP-UNF for desktop mixing and lists settings for different desk and wall positions.

  • Kali lists USB-C and balanced TRS inputs. Bax Music Netherlands describes the LP-UNF as a set of two.
  • According to Kali, the frequency response is 39 Hz at −10 dB, with a range of 54 Hz within ±3 dB. Don’t compare these figures directly with a specification that uses a different dB definition.

Yamaha

The HS4 is a compact stereo pair with a range of analogue line inputs.

  • Yamaha lists XLR/TRS combo, RCA and stereo mini inputs, as well as room and high-frequency controls. The Dutch specification lists the HS4 as a pair.
  • Yamaha gives figures of 83 Hz at −3 dB and 60 Hz at −10 dB. When assessing deep dance bass, bear these measurement definitions and your listening room in mind.

IK Multimedia

The original iLoud Micro Monitor is a small stereo set with wired line inputs and Bluetooth.

  • IK Multimedia lists desktop and tone settings; Bax Music Netherlands describes the original Micro Monitor as a set of two.
  • IK Multimedia reports system latency of 155 ms via Bluetooth and 1,02 ms via the analogue input. The Bluetooth figure depends on the source; the test described used an iPhone 6S with iOS 10.0.1. This model is not the same as the Micro Monitor Pro.

Genelec

The 8010A is a compact active monitor with an analogue XLR input and placement compensation.

  • Genelec lists dimensions of 195 × 121 × 115 mm with Iso-Pod, and a frequency limit of 67 Hz at −6 dB.
  • The 8010A is sold individually, so you’ll need two for stereo. The specification for a single monitor alone doesn’t give you a complete picture of deeper bass in your room.

Joybuy products for this mixing setup

Related products coming soon.

Frequently asked questions

How do I position two monitors on a small desk?

Angle both monitors towards your listening position and try to keep them symmetrical from left to right. For stereo monitoring, Genelec recommends a 60-degree angle, with your listening position at the tip of an equilateral triangle. If your desk doesn’t allow for this ideal layout, adapt the setup to your space. Reflections and room resonances affect what you hear.

Can I judge the bass in a dance mix by the lowest Hz figure?

No, not by that figure alone. Yamaha lists the HS4 at 83 Hz at −3 dB and 60 Hz at −10 dB; Kali Audio lists the LP-UNF at 54 Hz within ±3 dB and 39 Hz at −10 dB. The measurement definition and the acoustics of your listening room also need to be considered.

Is Bluetooth suitable as the main connection when mixing?

Check the exact model and how you plan to use it. For the original iLoud Micro Monitor, IK Multimedia reports 155 ms via Bluetooth under the test conditions described, depending on the source, compared with 1,02 ms via the analogue input. For timing-sensitive mixing, the wired input is the right choice in this case.

What should I check about a stereo set and its warranty?

First check whether the offer includes one monitor or a pair, and which cables are included. According to the Government of the Netherlands, consumer purchases come with a legal guarantee but no fixed statutory guarantee period; what matters is what you can reasonably expect from the product. An additional manufacturer’s or retailer’s warranty does not replace this right.

Can I return a stereo pair bought online?

For distance purchases, you’re entitled to a 14-day cooling-off period in many cases. The Government of the Netherlands advises checking the applicable terms and exceptions, so the cooling-off period doesn’t automatically apply in every situation.