Who can benefit from mesh Wi-Fi?

Housemates with weak Wi-Fi in their rooms

If you want to study or make video calls outside the room where the router is, measure the signal in each room to see whether an extra Wi-Fi point would help. The Consumers’ Association recommends connecting a computer to the router with a network cable when running a speed test.

Housemates who are online at the same time

If you use laptops, phones and streaming services on the same connection, consider where the Wi-Fi points are placed and how they connect to each other, rather than focusing only on the advertised top speed. The Consumers’ Association includes speed and usability in its Wi-Fi tests.

Tenants who want to keep their provider’s router

If you want to keep your existing router, check how the mesh system works with it and which settings remain available. ACM ConsuWijzer explains your freedom to choose your own equipment; how a particular mesh setup works depends on the settings it supports.

What should you look for?

Move your router or add one Wi-Fi point

Choose this if: your wired internet connection works well and the router’s location or one particular room seems to be the main problem.

The trade-off: moving the router depends on your cabling and provider setup; one point may not solve the problem in every room with a weak signal.

Mesh with a wireless connection

Choose this if: your tests show a weak signal in several rooms and there’s no suitable cable between the locations you want to connect.

The trade-off: distance and obstacles affect the connection between points; the advertised maximum coverage isn’t a measurement of your home.

Mesh with Ethernet backhaul

Choose this if: you already have usable Ethernet cabling in the right places and your mesh points support a wired connection to each other.

The trade-off: check the cable route, the ports you’ll need and the settings for using the system alongside your provider’s router.

What to consider What should you check? Who is this important for?
Coverage in each room Compare the wired speed with Wi-Fi in each room, then decide where a point could go. If I want to study or make video calls in my room, I want to know whether there’s really a dead spot there; around 33% of consumers say coverage in individual rooms is their top priority.
Multiple devices in use at once Test the wired connection first, then compare the Wi-Fi standard and the connection between the points. When housemates are using laptops, phones and streaming services at the same time, I want to know whether the limitation is the broadband connection or the local network; around 27% of consumers prioritise a stable connection when several devices are in use.
Provider’s router and network management Check which access point or bridge mode is supported and which features remain available. If I want to keep using my provider’s router, I want the extra system to work with it without unwanted changes to the features I use; around 20% of consumers prioritise compatibility and network management.
Size and running costs Choose the number of points based on measured dead spots and compare energy use where this information is available. I don’t want to install more points than my home needs, but I do want sufficient coverage; around 20% of consumers prioritise a suitable system size and its associated costs.

Common buying mistakes

  • Buying mesh before finding out what the problem is

    A Wi-Fi test alone won’t tell you whether the issue is with your wired internet connection or your wireless network.

    First, test the wired connection at the router, then check Wi-Fi in the rooms where you’re having problems.

  • Treating advertised maximum coverage as a guarantee

    Distance and obstacles affect the signal in a rented home; advertised coverage isn’t a measurement of your rooms.

    Use your test results and the available placement options to decide how many points you need, rather than relying only on the advertised maximum coverage or combined Wi-Fi speed.

    If the placement doesn’t work as expected, you may need extra points or a suitable cable route.

  • Choosing bridge mode without checking the implications

    Linksys says parental controls and prioritisation aren’t available in bridge mode.

    Check the documentation for the exact model and find out what changes when you use the selected mode before setting up the system alongside your provider’s router.

  • Choosing a three-point kit because more seems better

    A compact home doesn’t automatically need several extra points; the Consumers’ Association assesses energy use separately from its other test criteria.

    Start with the dead spots you’ve identified, then compare the kit sizes that are right for you.

    Extra equipment also uses more energy.

Brands to compare

TP-Link

According to TP-Link, the Deco X50 is a Wi-Fi 6 mesh range available as a one-, two- or three-point kit.

  • TP-Link lists three Gigabit ports and support for optional Ethernet backhaul on the Deco X50.
  • Advertised coverage and speed are manufacturer claims, not a guarantee of signal strength in a particular student house. Use measurements to work out how many points you need.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range; the two-point version is the most relevant option to compare here.

  • ASUS describes Ethernet backhaul between XD5 hubs and management through the ASUS Router app.
  • The general product information also describes a three-point kit. Check the exact version; compatible devices are needed for specific Wi-Fi 6 features.

Linksys

Velop Pro 7 is a Wi-Fi 7 mesh option for anyone looking to compare a version with more advanced equipment.

  • The Consumers’ Association lists five Ethernet ports for the three-point Velop Pro 7 version it tested.
  • Linksys says parental controls and prioritisation aren’t available in bridge mode. Check this if you plan to keep your provider’s router active.

Mesh Wi-Fi products at Joybuy

These products are mesh Wi-Fi systems to compare if, after taking measurements, you’re considering adding coverage or connecting several points.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

Worth comparing if you’re looking for a two-point mesh setup with the option of wired backhaul; use your measurements to decide whether two points are needed.

The product description lists tri-band Wi-Fi 7, two Deco points, 10, 2.5 and 1 Gbps ports per unit, and wired or wireless backhaul.

View at Joybuy
ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

ASUS ZenWiFi BT8 (2-Pack) Tri-Band Wi-Fi 7

Suitable for comparing a two-point mesh kit if you’re specifically looking for the Wi-Fi 7 tri-band version listed here.

The product name lists tri-band 2.4 GHz, 5 GHz and 6 GHz, Wi-Fi 7 (802.11be) and a two-unit kit.

View at Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

Worth comparing if you’re looking for a mesh system with Wi-Fi 7 and the option of a wired connection between points.

The product information lists dual-band 2.4 GHz and Wi-Fi 7 (802.11be), with the option of wired backhaul.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

Worth comparing if you’re looking for a two-point mesh kit that supports Ethernet backhaul.

The product information lists Wi-Fi 6, 1800 Mbps and support for Ethernet backhaul.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 Dual-Band Wi-Fi 7 Mesh Router

Huawei eKit OptiX FG736 BE3600 Dual-Band Wi-Fi 7 Mesh Router

Worth comparing if you’re looking at a mesh system with Wi-Fi 7; first work out how many points your rooms need.

The product name lists BE3600, dual-band and Wi-Fi 7. The product description says that multiple units can form a single network and be managed through the HUAWEI SmartLife app.

View at Joybuy

Frequently asked questions

How can you tell if mesh will solve the problem?

First, test the connection using a network cable at the router, then compare the result with Wi-Fi in the rooms where you’re having problems. If the wired connection repeatedly falls short, look into your broadband connection first or contact your provider; mesh won’t increase its speed.

Can you use a mesh system alongside your provider’s router?

Yes, provided the system you choose supports a suitable setting for your existing router setup. Check whether access point or bridge mode is available and which features you’ll lose; Linksys, for example, says parental controls and prioritisation aren’t available in bridge mode.

How do you work out how many Wi-Fi points you need?

First, measure the signal in each room and see where you can place the points. Choose how many you need based on the dead spots you’ve measured, not the maximum coverage stated on the box.

Do you need to replace your provider’s router to use mesh?

No, you don’t need to replace your existing router to add a mesh system behind it. In the Netherlands, ACM ConsuWijzer explains your freedom to choose your own equipment; however, check which connections and settings your setup supports.

How should you position and maintain your Wi-Fi points?

Measure the signal and test the new position again in each room; where possible, don’t hide your equipment in a utility cupboard. Keep your equipment up to date: ACM ConsuWijzer points out that updates are important for the security of your network and personal data.