Who is this guide for?

Film mixer with a small desk

You mix beside a screen and need to position two speakers symmetrically. A compact pair only helps if your listening position works well too.

Dialogue and effects editor

You assess how dialogue, music and effects work together to tell the story. For that, you need a fixed, practical listening position.

Mixer with an audio interface

You have analogue outputs and space for separate speakers, but want to check in advance that the connections are compatible and how many monitors are included.

What should you look for?

Compact active stereo pair

Choose this if: you have limited space around your screen but can position the speakers symmetrically on either side.

The trade-off: a compact cabinet doesn’t guarantee that you can assess deep film effects reliably from your listening position.

Two separate active nearfield monitors

Choose this if: you have room for two speakers positioned evenly and suitable analogue outputs.

The trade-off: some models are sold individually, so you’ll need two for stereo.

What to consider What should you check? Who is this important for?
Dialogue and stereo balance Check whether you can position two speakers at the same height and distance around your fixed listening position. If you want to assess dialogue, music and effects together from one fixed position, prioritise how well you can judge the mix there; around 33% of consumers consider this their main concern.
Desk space and room acoustics Measure the space available for both cabinets and check where your listening position is in relation to the screen and walls. If you need to fit two speakers beside a screen without sacrificing your listening position, getting the placement right comes first; around 25% of consumers share this priority.
Connections and package contents Compare your equipment’s outputs with the inputs on the exact model, and check whether the package contains one monitor or a pair. If you need to connect existing equipment and want a complete stereo system, the connections and package contents are key; around 25% of consumers prioritise these.
Deep film effects Check the dB reference when looking at frequency figures, and plan to check relevant deep effects on another playback system. If your soundtrack includes deep effects and you want to check them before presenting it, prioritise bass monitoring; around 17% of consumers consider this their top priority.

Pitfalls to avoid

  • Mistaking a single monitor for a stereo pair

    Yamaha lists one HS5 per package, as does Genelec for the 8010A. The PreSonus Eris 3.5 2nd Gen and ADAM Audio D3V are described as pairs. You won’t have a stereo pair with just one monitor.

    Before assessing your setup, check how many monitors are included and which connections you need.

  • Comparing bass cut-offs without checking the measurement reference

    The stated frequency limit for the Yamaha HS5 is 74 Hz at −3 dB; for the Genelec 8010A, it’s 67 Hz at −6 dB. These figures use different references, so they aren’t directly comparable.

    Check the dB reference too, and listen to relevant deep effects on another playback system.

  • Choosing a larger model without room for symmetrical placement

    The position of both speakers and the effect of the room influence what you hear from your listening position.

    First measure the space beside your screen and decide where you’ll listen.

Brands to consider

PreSonus

The Eris 3.5 2nd Gen is a compact stereo pair with analogue connections, suited to a small workspace.

  • PreSonus lists balanced TRS, unbalanced RCA and stereo inputs.
  • The stated frequency response starts at 80 Hz; that alone doesn’t tell you how deep the bass will sound in your room.

ADAM Audio

The D3V is a compact active pair with USB-C and balanced TRS connections.

  • ADAM lists placement settings and included stands.
  • According to ADAM, internal processing runs at 48 kHz/16-bit in USB mode; check that this suits your playback workflow.

Yamaha

The HS5 is a separate active 5-inch nearfield monitor for an analogue stereo setup.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL and HIGH TRIM settings.
  • The package contains one HS5; you’ll need two for stereo.

Genelec

The 8010A is a small, separate active monitor for a workspace with limited room and a suitable XLR output.

  • Genelec specifies dimensions of 195 × 121 × 115 mm including the Iso-Pod, and one analogue XLR input.
  • The package contains one monitor; Genelec also highlights the effect of positioning and room acoustics.

JBL Professional

The 305P MkII is a separate active 5-inch monitor and an analogue nearfield option, provided the cabinet fits your space.

  • JBL lists balanced XLR/TRS inputs, Boundary EQ and HF Trim.
  • JBL’s claims about a wide listening area aren’t an independent test of this film-mixing setup.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors for a stereo mix?

Position them symmetrically to the left and right, at the same height, and point them towards your fixed listening position. Genelec suggests an equilateral triangle as a starting point; the room and nearby surfaces will still affect what you hear.

Can you use the ADAM Audio D3V via USB-C for film audio?

According to ADAM, you can connect the D3V directly to a computer via USB-C. ADAM states that internal DSP processing runs at 48 kHz/16-bit in USB mode and 24-bit in analogue mode; bear this in mind when choosing your connection.

Do you need two Yamaha HS5 or Genelec 8010A monitors for stereo?

Yes, you need two of either model for a stereo pair. Yamaha lists one HS5 per package and Genelec one 8010A per package; check the contents of the specific offer.

Can you compare the frequency limits of the HS5 and 8010A directly?

No, not without taking the different measurement references into account. Yamaha lists the HS5 at 74 Hz at −3 dB, while Genelec lists the 8010A at 67 Hz at −6 dB; listen to deep effects on another playback system too.

What product rules apply to active monitors sold in the Netherlands?

According to Business.gov.nl, electrical and electronic equipment sold in the Netherlands must meet the applicable European requirements. Once the technical and administrative requirements have been met, the manufacturer must affix the CE marking and draw up an EU Declaration of Conformity. Check the documentation supplied with the specific offer.