Start with two monitors that can be positioned symmetrically around your listening position and connected to your audio source. Then choose between a compact stereo system and two separate nearfield monitors based on the space available on your desk. In a quiet room, pay attention to noise during silent passages, and only compare stated frequency limits when they use the same measurement basis. A larger monitor or subwoofer won’t automatically solve the effect your room has on bass.
Who are these monitors for?
Live recording editor
You assess vocals, instruments and their position in the stereo image from a single listening position. A symmetrical setup helps you compare the left and right channels; Genelec recommends an equilateral triangle as a starting point.
Editor with a small desk
You want to place two monitors beside your screen and need an audio source with suitable outputs. Check whether the cabinets can be positioned symmetrically and which connections your interface or other audio source provides.
Editor in a very quiet room
You may notice noise when sitting close to the monitors with no audio playing. Genelec notes that self-noise can be audible in a quiet room, so assess the source and the rest of your signal chain from your listening position too.
What should you look for when choosing?
First, choose a setup that suits your listening position and audio source. Then decide how much space you have and how much bass response you need.
Compact active stereo system
A good fit if: two larger cabinets would be difficult to fit beside your screen and you work from a fixed, close listening position.
Bear in mind: IK Multimedia’s stated frequency response of 55 Hz–20 kHz has no measurement tolerance specified, so it doesn’t show how reliably you can assess the very deepest bass.
Two separate nearfield monitors
A good fit if: you have room for two symmetrically positioned cabinets and your audio source has suitable analogue outputs.
Bear in mind: check whether the offer includes one monitor or a pair; placement controls are no substitute for a suitable listening position.
| What to consider |
What to look for when buying |
Who should give this more weight? |
| Stereo image and mix detail |
Check whether two monitors can be positioned at the same height and angled symmetrically. |
When I’m assessing the position of vocals and instruments in a live recording, I want to hear the left and right channels consistently from my fixed listening position. That’s why around 26% of consumers prioritise stereo imaging and mix detail. |
| Positioning in your home studio |
Measure the space beside your screen and the depth behind the monitors. |
With a small desk, I want to fit two cabinets without putting my listening position off-centre. Around 21% of consumers prioritise finding a suitable position. |
| Noise during silent passages |
Listen from your intended position, both with and without an audio source connected. |
In a quiet room, I don’t want to hear unexpected noise during a pause, and I want to be able to tell whether it’s coming from the monitor or the signal chain. Around 21% of consumers prioritise low audible noise. |
| Bass in live recordings |
Only compare frequency limits when they use the same measurement tolerance; assess the setup in your own room too. |
When I need to assess bass guitar or kick drum, I want to know what the chosen setup lets me hear from my listening position. Around 16% of consumers prioritise assessing low frequencies. |
| Connections and a complete pair |
Check your audio source’s outputs, the cables you’ll need and whether the box contains one monitor or two. |
For stereo mixing, I want to be sure I can connect two suitable monitors. Around 16% of consumers prioritise a complete set that’s ready to connect. |
Common pitfalls
-
Assuming one monitor makes a stereo pair
Genelec states that the 8010A comes as one monitor per box, while IK Multimedia describes the iLoud Micro Monitor as a stereo pair. The number of cabinets determines whether you have a complete stereo setup.
Check how many monitors are included in the exact version you’re buying, and which cables you’ll need.
-
Comparing frequency limits without checking measurement tolerance
Yamaha gives the HS5 a lower limit of 54 Hz at −10 dB; ADAM Audio gives the T5V a lower limit of 45 Hz at −6 dB. These figures use different measurement bases, so they aren’t directly comparable.
Only compare specifications when they use the same measurement tolerance, and listen to how the bass sounds in your own setup.
-
Assuming a larger cabinet or subwoofer will solve room problems
Positioning and reflections in the room affect what you hear from your listening position. A subwoofer also needs to be set up properly, including its position, phase and crossover with the monitors.
First, establish a workable stereo listening position, then decide whether you need extra bass for these recordings.
-
Blaming all audible noise on the monitor
Self-noise may be audible at close range in a very quiet room, but the connected source can also introduce noise.
Compare at the same listening distance, with and without an audio source connected, and check your signal chain before judging a model.
Brands to consider
Genelec
The separately boxed 8010A is a compact active monitor for a workspace with limited room and a suitable analogue XLR audio source.
- Genelec lists dimensions of 195 × 121 × 115 mm with the Iso-Pod and a lower limit of 67 Hz at −6 dB.
- You’ll need two separately boxed monitors for stereo. General information about self-noise isn’t a model-specific noise guarantee for the 8010A.
IK Multimedia
IK Multimedia describes the iLoud Micro Monitor as a compact active stereo system for desktop use.
- The system described includes two monitors, with XLR and RCA inputs and controls for desktop or shelf placement.
- The stated frequency response of 55 Hz–20 kHz has no measurement tolerance specified; don’t compare it directly with a limit measured at −6 dB.
Yamaha
The HS5 is a separate active nearfield monitor for a setup with suitable analogue outputs.
- Yamaha specifies XLR and balanced TRS inputs, ROOM CONTROL and HIGH TRIM.
- The stated lower limit of 54 Hz is measured at −10 dB; a stereo pair requires two monitors and enough space.
JBL Professional
The 305P MkII is a separate active 5-inch monitor for anyone with room for two cabinets who wants an analogue connection.
- JBL specifies XLR and TRS inputs, Boundary EQ and HF Trim.
- Descriptions of spaciousness or performance are manufacturer claims, not independent tests of your home studio.
ADAM Audio
ADAM Audio positions the separate T5V as an active nearfield monitor for small control rooms.
- ADAM Audio lists a 5-inch woofer and a frequency limit of 45 Hz at −6 dB.
- The T5V has a rear-facing bass reflex port. Its stated lower limit alone doesn’t determine how the bass will sound from your listening position; allow for space between the monitor and the wall.
Kali Audio
The LP-6 2nd Wave is worth considering if you have room for a larger nearfield cabinet.
- Kali Audio reports a lower noise floor for the second generation than for the first; this is the manufacturer’s comparison between generations.
- This manufacturer comparison isn’t an independent comparison with the other brands mentioned. Check which LP-6 generation is included in the version you’re considering.
Joybuy products
Related products coming soon.
Frequently asked questions
How should I position two monitors to assess a live recording?
Position them symmetrically at the same height and angle them towards your fixed listening position. Genelec recommends an equilateral triangle, with a 60° angle between the monitors, as a starting point. Then listen to how your own room affects the sound.
Does noise in a quiet room mean a monitor is faulty?
Not necessarily. Genelec says self-noise may be audible close to a speaker in a very quiet room, and the audio source can also introduce noise. Compare the sound with and without a source connected; this general information doesn’t give a noise threshold for every model mentioned.
Can I connect a monitor with an XLR input directly to my computer?
Only if your computer or interface’s audio output and cabling are compatible. XLR is an analogue audio input, not a USB connection. For stereo mixing, also check whether you’ll need two separate monitors.
Can I play music loudly in my home studio at any time?
You shouldn’t assume that you can. The Dutch Government points out that local rules and agreements, for example about playing music, may apply. Check which rules and circumstances are relevant to your address.
What rights do I have when buying online in the Netherlands?
For distance purchases from a business, the Dutch Government says you’re entitled to a 14-day cooling-off period in many cases; check the applicable terms and conditions. You’re also entitled to a product that meets the required standards. A manufacturer’s warranty is in addition to, not a replacement for, your statutory rights.