Who is a NAS for CAD projects suitable for?

CAD user with active projects

You want to keep projects in one central location, but you need to check whether your CAD software can work from network storage or whether a local working copy is a better fit. Autodesk describes limitations with certain AutoCAD workflows on NAS storage.

Designer who wants to restore earlier versions

You want to be able to retrieve an earlier project copy after deletion, corruption or an incident. Synology and the National Cyber Security Centre stress the importance of keeping separate backups in addition to your primary storage.

Designer with limited desk space

You need to make room for the enclosure, cables and ventilation, and assess noise figures in the context in which they were measured. Manufacturers such as QNAP and TerraMaster list dimensions and, for certain models, noise figures under specific test conditions.

What should you look for in a compact NAS for CAD?

First decide where you’ll edit active files and how you’ll restore earlier versions. Then compare the space, drives and network connection your setup requires.

What to consider What should you check? Who is this important for?
Active CAD files Check your application’s file workflow and test opening, saving and references in representative projects. If I want to avoid problems with network files while designing, I first check that my workflow is supported. Around 33% of consumers prioritise being able to work with active CAD files.
Project recovery Look at version control, a separate backup stored elsewhere and the ability to restore a project. If I need to be able to restore an earlier project version, I look beyond disk mirroring. Around 27% of consumers give project file recovery their top priority.
Space and noise Measure the available space, including room for cables and ventilation. QNAP lists the TS-264-8G as measuring 165 × 105 × 226,5 mm (h × w × d); TerraMaster gives a figure of 19,0 dB(A) for the F2-424 with two drives on standby, measured at 1 m. This noise figure does not describe noise during use. If my desk space is limited, I want to know how much room the complete setup takes up and under what conditions a noise figure was measured. Around 20% of consumers prioritise physical fit.
Complete setup Check which drives are included, whether they’re suitable for the model you’ve chosen and whether your network supports the connection you want. QNAP states that the TS-264-8G is supplied without hard drives. If I want to plan the whole setup in advance, I include drives and any backup equipment in my decision. Around 20% of consumers prioritise the overall purchase and expansion options.

Common mistakes when choosing NAS storage for CAD

  • Mistaking disk mirroring for a complete backup

    Disk mirroring can help if a drive fails, but it isn’t the same as keeping a separate copy in case files or the NAS are lost.

    Keep an additional copy elsewhere and test that you can actually restore a CAD project. The National Cyber Security Centre recommends keeping multiple copies of important data.

    Set aside time for recovery tests too, and allow for a separate backup destination.

  • Assuming a faster network port means trouble-free CAD editing

    A port specification doesn’t prove that your CAD software can open and save active files from the NAS without problems. Autodesk describes AutoCAD freezing when files are stored on NAS or SAN storage, and lists these environments as outside its supported storage environments.

    Check the recommended workflow for your application and test active files and references before using the NAS as your primary workspace.

  • Choosing based only on the enclosure or a noise figure

    A NAS enclosure may be supplied without drives. What’s more, a noise measurement taken in standby doesn’t tell you how loud it will be during file transfers.

    Check what’s included with the version you’ve chosen, plan for any additional components and only compare noise figures when the test conditions are equivalent.

    You may need to budget separately for drives or networking and backup components.

NAS brands to compare

Synology

The DiskStation DS225+ is a 2-bay option for central storage, synchronisation and backups using Synology software.

  • Synology lists a built-in 2,5GbE port and its own backup tools.
  • Synology’s throughput figures are based on internal tests and are not CAD performance measurements. Also check the current drive compatibility policy for your chosen model.

QNAP

The TS-264-8G is a 2-bay option to compare if you’re looking for two 2,5GbE ports and M.2 slots.

  • QNAP lists two 2,5GbE ports, two M.2 slots and dimensions of 165 × 105 × 226,5 mm (h × w × d).
  • QNAP states that the TS-264-8G is supplied without hard drives. The port specifications don’t show how CAD software will perform on your network.

TerraMaster

The F2-424 is a 2-bay option with two 2,5GbE ports and two M.2 slots.

  • TerraMaster lists dimensions of 222 × 119 × 154 mm (h × w × d).
  • The stated figure of 19,0 dB(A) applies with two drives on standby, measured at 1 m. It isn’t a noise measurement during CAD use.

ASUSTOR

The AS5402T is a 2-bay option for anyone considering M.2 expansion as well.

  • ASUSTOR lists four M.2 slots and two 2,5GbE ports for this model.
  • These specifications don’t show that every CAD user needs the extra slots, or that they make active CAD files work better.

UGREEN

The NASync DXP2800 is a 2-bay option with 2,5GbE and support for SATA drives and M.2 storage.

  • UGREEN states that storage drives are sold separately.
  • Manufacturer throughput figures are based on its own test conditions and don’t predict transfer speeds on your CAD setup. Don’t confuse this model with the DXP2800 GT.

NAS products on Joybuy for CAD projects

These Joybuy products are options for central storage and backups. Check the space and drives required for each model. Don’t use a NAS as the storage location for active AutoCAD files without checking first.

Synology DiskStation Intel Celeron J4125 Q

Synology DiskStation Intel Celeron J4125 Q

A desktop NAS for anyone who wants to keep projects in one central location and have backup options.

Budget for the required drives separately. Before using it with active AutoCAD files, check that your chosen workflow is suitable.

Joybuy
Synology DiskStation DS1525+

Synology DiskStation DS1525+

An option for central storage and backups if you have enough room for the enclosure and ventilation.

Measure the available space in advance and bear in mind that hard drives need to be chosen separately. Check the workflow for active AutoCAD files.

Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

Worth considering if you want to set up central storage and backups and can fit the enclosure into your workspace.

Hard drives aren’t included. Measure the space and ventilation available, and check the workflow for active AutoCAD files first.

Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

An option for central storage and backups if your workspace has room for a larger enclosure.

Check the space and ventilation available before choosing this model. Don’t use it as the location for active AutoCAD files without checking first.

Joybuy

Frequently asked questions

Can I edit an active AutoCAD drawing directly on a NAS?

Don’t assume you can without checking your workflow first. Autodesk describes freezes with certain AutoCAD files on NAS or SAN storage, and lists these storage environments as unsupported for AutoCAD. Consider working from a local copy, with a separate plan for synchronisation and backups.

Does a NAS replace the Fusion cloud or local Fusion cache?

No, a NAS doesn’t automatically replace the Fusion workflow. According to Autodesk, cached designs don’t automatically synchronise with newer versions. Check which designs are up to date locally and which project copies you want to keep separately.

How can I avoid mistaking disk mirroring for a backup?

In addition to your primary storage, keep a separate copy elsewhere and test that you can restore your files. The National Cyber Security Centre recommends the 3-2-1 rule for backups; it isn’t a legal requirement for a NAS.

What should I check before buying?

Check whether the version you’ve chosen includes hard drives, which drives are suitable for the model and what additional destination you’ll need for backups. For example, QNAP states that the TS-264-8G is supplied without hard drives. Also check the warranty terms for the specific offer.

Does the GDPR apply if I store CAD projects on a NAS in the Netherlands?

That depends on the content of the files and how they’re used. The Dutch Data Protection Authority states that the GDPR doesn’t apply to processing carried out solely for personal or household use. Organisations processing personal data must determine appropriate security measures; buying a specific NAS model is not, in itself, a measure prescribed by the regulator.