Who is a NAS for CAD suitable for?

CAD user with active projects

Wants to keep drawings and related files in one central location. First check that opening files directly, using external references and file locking are compatible with the software you use.

Designer who wants to restore files

Wants to restore project versions and backups after a mistake or drive failure. A NAS or RAID setup on its own isn’t enough; the National Cyber Security Centre recommends keeping a separate backup.

Designer short on desk space

Needs an enclosure that fits the available space, with enough room for drives, connections and ventilation.

What should you look for in a NAS for CAD?

When choosing a NAS for CAD projects on a small desk, consider how you work with CAD files, your recovery options, where the NAS will go and the complete storage setup.

What to consider What should you check? Who should consider this?
CAD workflow Check your CAD software’s storage guidance and test a representative project, including external references and simultaneous access. If I want to work directly in my CAD software, I first want to know whether my software and file references are compatible. Around 31% of consumers say CAD compatibility is their top priority.
Project recovery Check scheduled backups and retention periods, and make sure you can actually restore files from a separate storage location. If you want to restore earlier project versions, a mirrored drive alone isn’t enough. Around 25% of consumers prioritise recovery options.
Desk space Measure the available width and depth, and allow room for the power supply, cables and ventilation. If the NAS needs to sit on a small desk, I want to know in advance whether there’ll still be enough room with the cables connected. Around 25% of consumers say physical space is their top priority.
Complete storage setup Check whether drives are included, whether they’re compatible with the exact model and what separate storage you’ll need for backups. If you want to put together a complete setup, remember to factor in drives and a separate backup destination. Around 19% of consumers prioritise the initial purchase and their future storage needs.

Pitfalls to avoid when buying a NAS for CAD

  • Mistaking a mirrored pair of drives for a complete backup

    RAID can help keep your data available if a drive fails, but it doesn’t protect against every cause of data loss. The National Cyber Security Centre emphasises that RAID is no substitute for a backup.

    Plan a separate backup, preferably at another location too, and test that you can restore your files.

    A separate storage destination requires extra storage space and time to set up backups and test recovery.

  • Assuming a faster NAS port means smoother CAD work

    A network port doesn’t determine whether your CAD software, file references and file locking will work properly with the NAS. Autodesk describes potential issues with AutoCAD files on network folders.

    First check your software’s recommended workflow, then test the complete network connection with a representative project.

    A faster network connection may require changes to your computer, switch or cabling.

  • Comparing only the enclosure and its stated dimensions

    Drives aren’t included with every NAS model. Connections, cables and ventilation may also take up more space than the enclosure alone.

    Check what’s included in the offer, which drives are compatible and how much room the complete setup will take up.

    You may also need to factor compatible drives and a separate backup storage destination into your setup.

Brands to consider

Synology

Synology describes the DiskStation DS224+ as a compact, two-bay NAS for centralised file management, synchronisation and backups.

  • The manufacturer lists backup and synchronisation features for centralised file management.
  • These features don’t confirm that working directly on every CAD project is supported. Also check that the drives in your chosen setup are compatible.

QNAP

QNAP describes the TS-264-8G as having two drive bays, two 2.5GbE ports and space for M.2 SSDs.

  • QNAP lists the enclosure dimensions as 165 × 105 × 226,5 mm (h × w × d), excluding the foot pads.
  • QNAP states that HDDs aren’t included. The ports alone don’t prove you’ll get higher speeds with your own network or confirm CAD compatibility.

ASUSTOR

ASUSTOR describes the Drivestor 2 Pro Gen2 (AS3302T v2) as a NAS with two drive bays, one 2.5GbE port and snapshot support.

  • The manufacturer lists snapshots as a feature of the AS3302T v2.
  • Check the full model name, including v2: the earlier AS3302T is a different model. Manufacturer measurements don’t show how CAD projects will perform on your desk.

UGREEN

UGREEN describes the NASync DXP2800 as having two drive bays and a 2.5GbE connection.

  • UGREEN’s model information lists two drive bays and 2.5GbE.
  • Check the exact specifications and drive compatibility of the version you’re considering.

NAS models at Joybuy

These models are NAS options for central storage and backups. Before buying, check that the enclosure and drives suit your desk and workflow.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

Worth considering as a central storage and backup destination for CAD projects. Check that you have enough desk space and choose drives to suit your setup.

Also plan a separate backup destination. To work directly with CAD files, you’ll need to check compatibility with your specific software and workflow.

Joybuy
Synology DiskStation DS925+ NAS, diskless

Synology DiskStation DS925+, diskless

Worth considering as a central storage and backup destination for CAD projects. The product title states that hard drives aren’t included.

Check which drives are compatible and leave room for the NAS, cables and ventilation. A NAS isn’t automatically suitable as an active working folder for every CAD programme.

Joybuy
Synology DiskStation DS1825+ NAS

Synology DiskStation DS1825+ NAS

Worth considering if you’re looking for a NAS for central storage and backups and have enough room for the enclosure.

Measure the available space and allow for ventilation. Check which drives suit your setup and plan a separate backup destination.

Joybuy

Frequently asked questions

Can I work directly from my CAD software on any NAS?

No, don’t assume you can. Autodesk doesn’t certify every NAS for its products, and it describes potential issues with external references and file locking in AutoCAD. Check your programme, version and workflow before using the NAS as your primary workspace.

How can I make sure I can restore CAD projects?

Keep a separate backup alongside your NAS and test that you can restore your files. The National Cyber Security Centre emphasises that a NAS or RAID is no substitute for a backup.

What should I check before putting a NAS on my desk?

Measure the available space and allow for cables, the power supply and ventilation. Also check whether compatible drives are included and what storage you’ll need for a separate backup.

Will I need extra storage as well as the NAS enclosure?

It depends on the version and the offer. Check whether drives are included and compatible with the exact model. You’ll also need a separate storage destination for a separate backup.

Will a NAS with 2.5GbE automatically make my CAD work faster?

No, a 2.5GbE connection doesn’t guarantee that your entire network will reach that speed or that your CAD software will work properly with the NAS. Your other network equipment and software workflow must also be suitable.