Which option is right for you?

Sketcher with limited desk space

You already work with a computer and want to sketch a floor plan idea without adding a large device to your desk.

Designer who draws directly on the screen

You want to see walls and layouts beneath the pen tip, and can make room for the device and the right connections.

Draftsperson who needs to record measurements

You start with a sketch, then want to add dimensions and scale using suitable floor-planning or CAD software.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Overall size and active area Measure the space available on your desk and compare it with the device’s full dimensions, not just its active drawing area. If I have little room beside my keyboard and mouse, I want to know how much space the device takes up; around 36% of consumers focus mainly on its footprint.
From sketch to accurate measurements Decide whether you only want to sketch a concept or also need accurate dimensions and scale; check your software’s features. If I need to work out dimensions, I want my software to handle walls and measurements; around 29% of consumers prioritise dimensions and scale.
Drawing on the screen or on a monitor Compare the desk space taken up by a pen display with the space you have available, and consider how important it is to see the line directly beneath the pen. If I want to see the line directly beneath my pen, I can set aside more desk space for a pen display; around 21% of consumers prioritise this preference.
Connection and software Check your computer’s ports, the cables you need and whether your drawing software supports pen input. If I want to check that everything works together first, I’ll check my computer, cables and software before buying; around 14% of consumers focus mainly on this combination.

Avoid common buying mistakes

  • Confusing the active drawing area with the desk space required

    The overall dimensions include the space around the drawing area too. This means a tablet may fit your desk less easily than you’d expect from the active area alone.

    Measure the space for the device, your hand and the cable, then compare it with the dimensions of the exact model.

  • Assuming every USB-C port can drive a pen display

    For the Kamvas 13, Huion specifies requirements for both data and video signals. So a USB-C port alone doesn’t tell you whether the connection you need will work.

    Check your computer port’s specifications and which cable setup the model you’ve chosen uses.

  • Confusing a freehand sketch with an accurately scaled floor plan

    A pen lets you draw lines, but accurate measurements and scale depend on the features in your floor-planning or 2D CAD software.

    First decide whether you only want to sketch ideas or also record dimensions. Then check that the software suits your workflow and supports pen input.

  • Treating One by Wacom and Wacom One as the same model

    Wacom uses these names for different product lines, so similar product names don’t mean they’re the same model.

    Check the full product name, model code and version before ordering.

Brands and models compared

Wacom

The One by Wacom Small CTL-472 is a graphics tablet without a screen. The Wacom One S is a different product line, so check the full model name.

  • According to Wacom’s fact sheet, the CTL-472 measures 210 × 146 × 8,7 mm and has an active area of 152 × 95 mm. These dimensions exclude the label and rubber feet.
  • You draw using a computer and see the result on the monitor.

Huion

The Inspiroy 2 S is a compact graphics tablet; the Kamvas 13 is a separate pen display for anyone who wants to draw directly on a screen.

  • Huion lists the Inspiroy 2 S as measuring 246 × 152 mm and featuring a scroller.
  • The Kamvas 13 takes up more desk space. For a single USB-C connection, Huion says the computer port must support USB 3.1 Gen 1 and DP 1.2.

XPPen

The Deco mini7 is a graphics tablet with shortcut keys; the Artist 12 (2nd Gen) is a pen display.

  • XPPen lists the Deco mini7 as measuring 260,2 × 162,2 × 9,3 mm and having eight shortcut keys.
  • The manufacturer lists an 11,9-inch screen diagonal for the Artist 12 (2nd Gen). This diagonal doesn’t indicate the overall dimensions of the complete device.

GAOMON

The S620 is a graphics tablet without its own screen, designed for use with a supported device.

  • GAOMON lists overall dimensions of 211 × 174 × 8 mm and an active area of 165,1 × 101,6 mm in PC mode.
  • According to GAOMON, its tablets are input devices, not standalone drawing computers; drawing software isn’t included.

Joybuy products for sketching

This selection includes graphics tablets and tablets with a stylus for digital floor plan sketches. Check the full dimensions of each model and make sure your software supports pen input and accurate measurements.

Wacom Intuos Pro Pen Tablet Small

Wacom Intuos Pro Pen Tablet Small

An option for digital floor plan sketches using pen input; compare the dimensions of this version with the space available on your desk.

View at Joybuy
Wacom One pen tablet small S

Wacom One pen tablet Small S

The product name indicates a small graphics tablet; check that the exact dimensions suit your workspace.

View at Joybuy
TECLAST ArtPad Pro tablet, 12.7 Inch, 2K, compatible with T-pen

TECLAST ArtPad Pro Tablet, 12.7 Inch, 2K, compatible with T-pen

For anyone who wants to sketch directly on a tablet screen; the product name specifies compatibility with a T-pen.

View at Joybuy
TECLAST ArtPad Pro tablet, 12.7 Inch, 2K, with stylus

TECLAST ArtPad Pro Tablet, 12.7 Inch, 2K, including stylus

For sketching on the screen; the product name states that a stylus is included.

View at Joybuy
Wacom Intuos Medium Wired Pen Tablet

Wacom Intuos Medium Wired Pen Tablet

A wired graphics tablet for digital input; compare its full dimensions with the desk space available.

View at Joybuy

Frequently asked questions

Can I create an accurately scaled floor plan with just a graphics tablet?

No, the tablet alone doesn’t record accurate measurements or scale. You’ll need the right features in floor-planning or 2D CAD software; also check that pen input suits your way of working.

How can I connect a Kamvas 13 without overlooking any cables?

For the Kamvas 13’s USB-C connection, Huion says the computer port must support USB 3.1 Gen 1 and DP 1.2. The 3-in-1 connection uses HDMI and separate USB connections for video, data and power; check which setup works with your computer and the package supplied.

What can I check if the pen or drawing line isn’t responding properly?

First, check the connection and the driver for your exact model. Wacom describes how to install a driver for One by Wacom on Windows or Mac; then test the pen in your own drawing software.

What are my rights regarding returns and guarantees when buying online in the Netherlands?

For applicable distance sales to consumers, the Dutch Government says you’ll often have a 14-day cooling-off period, with some exceptions. You’re also entitled to a product that is fit for purpose. The Dutch Government says there is no fixed statutory guarantee period in the Netherlands, and that the retailer is your point of contact if a product is faulty.