Compact cockpit builders
You want to control several navigation functions without setting up a separate device for each one. Octavi describes the IFR-1 as a compact device for a range of simulated functions.
Start with the navigation task you want to practise: setting COM and NAV frequencies, managing a GPS flight plan or reading instruments. A multifunction panel can combine several features in a small desk footprint, while a dedicated radio, GPS or instrument panel focuses on a specific task. Before choosing, check your simulator version, simulated aircraft, connections and available space.
You want to control several navigation functions without setting up a separate device for each one. Octavi describes the IFR-1 as a compact device for a range of simulated functions.
You mainly want to set simulated COM and NAV frequencies or read navigation instruments. Logitech G describes its Radio Panel as a control for COM and NAV functions.
You want to use the buttons and screen of a matching simulated GPS navigator, and have room for the necessary connections. RealSimGear and FlightSimBuilder each describe a physical GNS 530 interface.
First decide which task you want to practise, then compare the controls, screen space and connections you’ll need.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Several functions in a small space | Measure the space available and check that the functions and aircraft profiles you want are supported. | If you want to control different functions on a small desk, consider how much space a single device will take up. Around 33% of consumers prioritise compact, multifunctional controls. |
| Radio and navigation frequencies | Check that the COM and NAV functions you want are supported and work with your simulator version and aircraft. | If you mainly want to set frequencies, look for controls suited to that practice rather than assuming they also manage a GPS flight plan. Around 27% of consumers prioritise frequency controls. |
| Managing a GPS flight plan | Check your aircraft’s avionics, simulator support, connections, included cables and mounting requirements. | If you want to control a matching GNS 530, also check that your setup can accommodate the connections and placement. Around 20% of consumers prioritise GPS flight plan controls. |
| Reading navigation instruments | Decide which displays you need, whether they must be visible at the same time and whether an existing screen will do. | Choose a display solution based on the instruments you want to see while practising. Around 20% of consumers make clearly visible instruments their main priority. |
Setting COM and NAV frequencies is different from managing a flight plan on a GNS 530.
Make a note of the tasks you want to practise, then choose the panel type that suits them.
Logitech G says its Instrument Panel offers 15 displays that you can switch between; this doesn’t mean they’re all shown on the panel at the same time.
Check how many instruments you want to see simultaneously during a practice session.
Depending on the layout you want, you may need extra screen space or another physical unit.
The connections and components required vary by model. RealSimGear lists an HDMI connection for the GNS530, but doesn’t include an HDMI cable; FlightSimBuilder lists three cables included with its GNS 530.
Check what’s included with the exact model, and make sure you have the necessary ports and desk space.
You’ll need to source your own HDMI cable for the RealSimGear GNS530. Also check whether you need a suitable mounting solution for your setup.
Octavi’s IFR-1 is a compact control device for a range of simulated navigation and cockpit functions.
Logitech G offers separate Flight Sim panels for radio frequencies and instrument displays.
RealSimGear describes the GNS530 as a physical interface for a matching simulated navigator.
FlightSimBuilder offers a dedicated GNS 530 for anyone who wants to control a matching simulated navigator.
Air Manager 5 Desktop is software for configurable instrument panels on existing screens, not a physical panel.
It depends on the panel and what you want to use it for. The Octavi IFR-1 is a control device, while the Logitech G Instrument Panel has its own small LCD. For the RealSimGear GNS530, the manufacturer specifies an HDMI connection to the computer. So first decide whether you want extra controls or a separate instrument display.
Check that your simulator version and simulated aircraft are compatible with the panel, and find out which cables, profiles or plug-ins you’ll need. For the GNS530 in MSFS, RealSimGear describes a specific setting in its plug-in; that instruction doesn’t automatically apply to other panels.
For many eligible online purchases from a business, you have a 14-day cooling-off period, according to the Government of the Netherlands. You’re also entitled to a product that meets reasonable standards of quality; the Government says there’s no fixed statutory guarantee period. If a product is faulty, contact the seller.
Don’t assume that it does. The Dutch Human Environment and Transport Inspectorate describes qualification certificates for operators of Flight Simulation Training Devices. Ask the relevant training provider whether a particular practice session counts towards a course; this guide covers simulator use as a hobby.