Ceramics sellers with coloured glaze
If you photograph ceramics under fixed lighting, you’ll want to avoid colour casts that make the glaze look different. Canon Netherlands explains how different light sources can affect colour casts.
When photographing second-hand ceramics under artificial light, choose a compact camera based on the shots you need: accurate colour, close-ups of signs of wear or a full view of the item. Test the white balance under your own lights and check that the camera focuses at the zoom setting you want to use. A tripod can help you keep your framing consistent.
If you photograph ceramics under fixed lighting, you’ll want to avoid colour casts that make the glaze look different. Canon Netherlands explains how different light sources can affect colour casts.
For chips, crazing and maker’s marks, close focusing is more important than simply having a wide zoom range. The OM Digital Solutions manual describes a close-up mode for the Tough TG-7.
If you need to frame both a bowl and a vase in full from a limited distance, test the camera-to-subject distance and wide-angle range at your own workspace first. Consumentenbond highlights size and ease of use as factors to consider when choosing a camera.
Choose this option: if small blemishes and maker’s marks are the most important shots you need. The OM Digital Solutions manual says the Tough TG-7 can shoot from 1 cm away in close-up mode and offers focus bracketing.
Bear in mind: the minimum focusing distance doesn’t tell you whether a larger item will fit fully in the frame or be well lit.
Choose this option: if you want to take overview shots and moderate close-ups from a single table. Canon Netherlands specifies a 24–100 mm equivalent range for the PowerShot G7 X Mark III, with focusing from 5 cm in wide-angle mode.
Bear in mind: Canon gives the minimum focusing distance in telephoto mode as 40 cm, so check which zoom setting you’ll need for photographing maker’s marks.
Choose this option: if you’ll also use the camera away from your photo table and want a wider zoom range. Panasonic lists 15× optical zoom and AF macro from 3 cm for the LUMIX TZ300; Sony specifies a 24–200 mm equivalent range for the RX100 VII.
Bear in mind: for the RX100 VII, Sony gives a focusing distance of approximately 8 cm in wide-angle mode and approximately 100 cm in telephoto mode. More zoom isn’t automatically useful for photographing small details on a table.
| What to consider | What to check before buying | Who is this important for? |
|---|---|---|
| Colour under artificial light | Set the white balance and take test shots under the lights you use. | If you want the glaze colour to look recognisable in your listings, you’ll need to assess colour casts under your own lighting. Around 29% of consumers put colour reproduction first. |
| Chips and maker’s marks | Check the focusing distance at your preferred zoom setting and how much of the detail fits in the frame. | If you want to show small signs of wear or maker’s marks individually, the camera needs to focus at the actual distance you’ll be shooting from. Around 29% of consumers prioritise these details. |
| The whole item | Measure your working distance and test whether a bowl or vase fits fully in the frame. | On a small photo table, you’ll want to capture the whole item without constantly rearranging your setup. This matters most to around 24% of consumers. |
| A repeatable workflow | Try the controls and file transfer; also check which accessories are included. | If you’re creating a series of listings, a simple, repeatable setup may matter more than extra features you won’t use. Around 18% of consumers put this workflow first. |
The focusing distance can vary between zoom settings. Sony gives the RX100 VII’s focusing distance as approximately 8 cm in wide-angle mode and approximately 100 cm in telephoto mode.
Check focus and how much of the subject fills the frame at the zoom setting you’ll actually use to photograph maker’s marks.
With a fixed tabletop setup, your working distance, framing and close-up capabilities also matter. Consumentenbond points out that a large zoom range is linked to other camera features.
Take a test shot of both the whole item and a small detail on your own table.
A different light source can produce a different colour cast. Keeping your framing fixed also helps make a series of product photos consistent.
Assess test shots under your own lights and check that you can position the camera securely.
The Tough TG-7 is a useful reference for sellers who mainly want to capture small blemishes and maker’s marks.
The PowerShot G7 X Mark III is a compact zoom option for overview shots and moderate close-ups.
The LUMIX TZ300 is worth considering if you want to combine product photography with a wider zoom range for other uses.
The RX100 VII is a compact camera with a 1.0-type sensor and a 24–200 mm equivalent range.
The Joybuy cameras below are compact camera options for photography. Check whether the focus, colours and controls suit your ceramics and lighting setup for each model.
No image available
The product name describes this as a portable point-and-shoot camera for photography. Test it at your working distance to see whether the zoom setting helps you frame your ceramics.
The product name lists 80MP UHD and 18X zoom. Assess focus and how much of the subject fills the frame with a test shot.
No image available
This pocket camera is described as being for photography and video. Check that it can focus on both a full view and small details from the distance available to you.
The product information lists 4K, 44MP and 16X digital zoom.
No image available
RAW capture may be useful if you want to edit your images afterwards. Take test shots too, so you can see how the camera captures the glaze under your lights.
The product information lists a 1-inch sensor, a 24–70 mm focal length and RAW capture.
Check whether you can set the white balance to suit your needs, then take test shots under your own lighting. Canon Netherlands explains that different light sources can produce different colour casts. Sensor size alone doesn’t prove how accurately a camera will reproduce the glaze.
Use a fixed background and try a tripod to keep your framing consistent. Canon Netherlands recommends a tripod for consistent product photos. Also check that your chosen setup fits the space on your photo table.
According to ACM ConsuWijzer, when you buy online from a business you generally have a statutory cooling-off period of up to 14 days after delivery, subject to exceptions. Your statutory right to a product that meets expectations also depends on what you could reasonably expect, not just on the stated manufacturer’s warranty period.
A professional seller must not mislead consumers with incorrect information or by leaving out important details. The ACM advises businesses on these rules, which don’t necessarily apply to an occasional private seller. Mention any relevant defects and check that the photos and description together give an accurate impression.