Who are these monitors for?

Radio producer with a crowded desk

You need to fit two speakers alongside a microphone, screen and mixing equipment, and be able to point them towards your listening position. Genelec recommends a symmetrical setup for reliable stereo monitoring.

Voice and music mixer

You need to assess speech, jingles and music together. The EBU distinguishes between production and distribution in radio, so also check the loudness of the finished programme against the requirements of your broadcaster and distribution channel.

Creator with an existing audio interface

You want to connect the monitors to the outputs on your interface or mixing desk without choosing an incompatible connection. ADAM Audio, PreSonus and Yamaha list different connection options for each model.

What should you look for when choosing?

Compact stereo set with USB-C and analogue inputs

A good fit if: you have limited desk space and want to connect a compatible computer or analogue source.

Consider: check whether your source supports USB-C audio and which cables are included with the set.

Compact stereo set with analogue inputs

A good fit if: your radio mixing desk or interface has analogue outputs that match the set’s inputs.

Consider: compare your source connection with the one on the exact model; not every analogue input uses the same plug.

Two separate nearfield monitors

A good fit if: you can position two monitors symmetrically and have a compatible analogue connection.

Consider: the Genelec 8010A is packaged individually, so you’ll need two units for stereo.

DJ-focused active stereo set

A good fit if: your source is compatible with an RCA or 3.5 mm aux connection and you’re looking for a straightforward analogue listening option.

Consider: being marketed as a DJ speaker set doesn’t prove that it will help you assess speech mixes more critically.

What to consider What should you look for? Who is this important for?
Desk space and positioning Measure the width and depth available for both speakers, and check that you can point them towards your listening position. If your desk is already full, you’ll want to fit two speakers without losing your listening position. Around 33% of consumers prioritise desk space and positioning.
Speech balance and stereo Check that both speakers can be positioned in a similar way; for the final programme loudness, follow your broadcaster’s workflow. When mixing voices with jingles and music, you’ll want to assess the balance from your listening position. Around 27% of consumers give speech and programme balance top priority.
Connection to your equipment Make a note of the outputs on your computer, interface or mixing desk, then compare them with the inputs and included cables for the exact model. If you want to keep using your existing equipment, the connections need to be compatible at both ends. Around 20% of consumers prioritise connection compatibility.
Checking music and bass If a frequency limit is specified, check the dB tolerance too, and assess the mix from your own listening position. When music and low-frequency effects matter, you won’t want to rely on a number in the specifications alone. Around 20% of consumers give checking music and bass top priority.

Common buying mistakes

  • Mistaking a single monitor for a stereo set

    Genelec states that each 8010A package contains one monitor and one mains cable. A single unit won’t give you a stereo setup.

    Before buying, check how many speakers are included and what else you’ll need for stereo.

    You’ll need two units for stereo; remember to allow for the required power and audio cables too.

  • Comparing frequency limits without checking the measurement tolerance

    A limit at −10 dB and one at −3 dB describe different measurement conditions and aren’t directly comparable.

    Check the dB tolerance given for the specified limit, and take the positioning and your listening room into account.

  • Assuming every active monitor will work with your source

    The models mentioned use a range of USB-C, TRS, XLR, RCA and mini-jack connections.

    Make a note of your equipment’s outputs, then check the inputs and included cables for the exact model version.

    If the connections don’t match, you may need a different cable or a compatible audio interface.

Brands to consider

ADAM Audio

ADAM Audio describes the D3V as a compact active stereo set with USB-C audio and two balanced TRS inputs.

  • The manufacturer lists detachable feet and placement switches.
  • The quoted range from 45 Hz is measured at −6 dB; it won’t fully predict what you’ll hear from your listening position.

Yamaha

According to Yamaha’s Dutch-language specifications, the HS3 is a compact analogue stereo set with several input types.

  • Yamaha lists combo XLR/TRS, RCA and stereo mini-jack inputs, with each monitor measuring 132 mm wide.
  • The stated low-frequency limit varies with the measurement tolerance: 70 Hz at −10 dB and 85 Hz at −3 dB.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as an active stereo set with several analogue connections for a compact workspace.

  • The manufacturer lists balanced TRS, RCA and 3.5 mm line inputs, a front-mounted headphone output and included connection cables.
  • Check the exact version if you need USB-C audio; this connection isn’t listed for this model.

Genelec

Genelec positions the 8010A as a separate active monitor with an analogue XLR input, designed for a setup with two individual speakers.

  • The manufacturer lists a width of 121 mm, including the stated Iso-Pod dimensions, and simple room settings.
  • The package contains one monitor; you’ll need two for stereo. Also check that you have room for the power and audio cables.

Kali Audio

Kali Audio describes the LP-UNF as a set for desktop mixing, with USB-C, balanced TRS and unbalanced RCA.

  • The manufacturer lists settings for different desk and wall placements.
  • The 39 Hz frequency limit is measured at −10 dB; the stated limit at ±3 dB starts at 54 Hz. Promotional sound claims aren’t an independent measurement for your workspace.

Hercules

Hercules positions the DJMonitor 42 as an active DJ speaker set for straightforward analogue listening.

  • The manufacturer lists RCA, 3.5 mm aux and controls for volume, bass and treble.
  • The description of an almost studio-like experience isn’t independent confirmation that this model will help you assess a radio mix more critically.

Joybuy products

Related products coming soon.

Frequently asked questions

How do you position two monitors when your desk is small?

Point both speakers towards your listening position and try to place them at equal distances and heights on the left and right. Genelec describes an equilateral triangle as the ideal stereo setup; measure first to check that it will fit on your desk.

Can you connect a USB-C monitor directly to your radio mixing desk?

Only if both devices support the connection. ADAM Audio lists USB-C audio on the D3V for compatible computers and mobile devices, as well as separate analogue TRS inputs; compare these inputs with the outputs on your mixing desk.

Is a low-frequency limit enough to assess music in your radio show?

No. A stated limit alone doesn’t tell you what you’ll hear from your listening position. Check the dB tolerance and positioning; for example, Yamaha lists 70 Hz at −10 dB and 85 Hz at −3 dB for the HS3.

Should you work out the desired loudness of a radio programme from the monitor specifications?

No. The EBU treats programme loudness and true peak as measurements of the audio signal, and distinguishes between production and distribution in radio. Follow the delivery requirements for your broadcaster and distribution channel; monitor specifications don’t replace them.

Can you buy the Genelec 8010A as a stereo set with one monitor?

No. One 8010A is one monitor; Genelec states that each package contains one monitor and one mains cable. You’ll need two units for stereo, with enough room for both speakers and their connections.